Added dynamic module loading: now the Glk program (i.e., the
authorfliep <fliep@ddfedd41-794f-dd11-ae45-00112f111e67>
Tue, 23 Dec 2008 06:15:17 +0000 (06:15 +0000)
committerfliep <fliep@ddfedd41-794f-dd11-ae45-00112f111e67>
Tue, 23 Dec 2008 06:15:17 +0000 (06:15 +0000)
interpreter) is loaded from a .so file.
The code from the Chimara library and the test program are now
completely separate.
Removed the use of error_dialog() from the library code and replaced
it with GTK warning functions.

12 files changed:
aclocal.m4
config.h.in
configure.ac
ltmain.sh [new file with mode: 0755]
src/Makefile.am
src/chimara-glk.c
src/chimara-glk.h
src/fileref.c
src/input.c
src/main.c
src/model.c
src/strio.c

index d8c8bf0daa12c5cc67db834b76c8f68d1ec830e9..669f004e5aea5758cb5795e939029f50e46f6418 100644 (file)
@@ -630,6 +630,6624 @@ AU_ALIAS([AC_PROG_INTLTOOL], [IT_PROG_INTLTOOL])
 # AC_DEFUN([AC_PROG_INTLTOOL], ...)
 
 
+# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
+
+# serial 52 AC_PROG_LIBTOOL
+
+
+# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
+# -----------------------------------------------------------
+# If this macro is not defined by Autoconf, define it here.
+m4_ifdef([AC_PROVIDE_IFELSE],
+         [],
+         [m4_define([AC_PROVIDE_IFELSE],
+                [m4_ifdef([AC_PROVIDE_$1],
+                          [$2], [$3])])])
+
+
+# AC_PROG_LIBTOOL
+# ---------------
+AC_DEFUN([AC_PROG_LIBTOOL],
+[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
+dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
+dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
+  AC_PROVIDE_IFELSE([AC_PROG_CXX],
+    [AC_LIBTOOL_CXX],
+    [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
+  ])])
+dnl And a similar setup for Fortran 77 support
+  AC_PROVIDE_IFELSE([AC_PROG_F77],
+    [AC_LIBTOOL_F77],
+    [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77
+])])
+
+dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
+dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
+dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
+  AC_PROVIDE_IFELSE([AC_PROG_GCJ],
+    [AC_LIBTOOL_GCJ],
+    [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
+      [AC_LIBTOOL_GCJ],
+      [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
+       [AC_LIBTOOL_GCJ],
+      [ifdef([AC_PROG_GCJ],
+            [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])
+       ifdef([A][M_PROG_GCJ],
+            [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])])
+       ifdef([LT_AC_PROG_GCJ],
+            [define([LT_AC_PROG_GCJ],
+               defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])])
+])])# AC_PROG_LIBTOOL
+
+
+# _AC_PROG_LIBTOOL
+# ----------------
+AC_DEFUN([_AC_PROG_LIBTOOL],
+[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
+AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
+AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl
+AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+AC_SUBST(LIBTOOL)dnl
+
+# Prevent multiple expansion
+define([AC_PROG_LIBTOOL], [])
+])# _AC_PROG_LIBTOOL
+
+
+# AC_LIBTOOL_SETUP
+# ----------------
+AC_DEFUN([AC_LIBTOOL_SETUP],
+[AC_PREREQ(2.50)dnl
+AC_REQUIRE([AC_ENABLE_SHARED])dnl
+AC_REQUIRE([AC_ENABLE_STATIC])dnl
+AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_PROG_LD])dnl
+AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
+AC_REQUIRE([AC_PROG_NM])dnl
+
+AC_REQUIRE([AC_PROG_LN_S])dnl
+AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
+# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
+AC_REQUIRE([AC_OBJEXT])dnl
+AC_REQUIRE([AC_EXEEXT])dnl
+dnl
+AC_LIBTOOL_SYS_MAX_CMD_LEN
+AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
+AC_LIBTOOL_OBJDIR
+
+AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
+_LT_AC_PROG_ECHO_BACKSLASH
+
+case $host_os in
+aix3*)
+  # AIX sometimes has problems with the GCC collect2 program.  For some
+  # reason, if we set the COLLECT_NAMES environment variable, the problems
+  # vanish in a puff of smoke.
+  if test "X${COLLECT_NAMES+set}" != Xset; then
+    COLLECT_NAMES=
+    export COLLECT_NAMES
+  fi
+  ;;
+esac
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed='sed -e 1s/^X//'
+[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g']
+
+# Same as above, but do not quote variable references.
+[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g']
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+
+# Constants:
+rm="rm -f"
+
+# Global variables:
+default_ofile=libtool
+can_build_shared=yes
+
+# All known linkers require a `.a' archive for static linking (except MSVC,
+# which needs '.lib').
+libext=a
+ltmain="$ac_aux_dir/ltmain.sh"
+ofile="$default_ofile"
+with_gnu_ld="$lt_cv_prog_gnu_ld"
+
+AC_CHECK_TOOL(AR, ar, false)
+AC_CHECK_TOOL(RANLIB, ranlib, :)
+AC_CHECK_TOOL(STRIP, strip, :)
+
+old_CC="$CC"
+old_CFLAGS="$CFLAGS"
+
+# Set sane defaults for various variables
+test -z "$AR" && AR=ar
+test -z "$AR_FLAGS" && AR_FLAGS=cru
+test -z "$AS" && AS=as
+test -z "$CC" && CC=cc
+test -z "$LTCC" && LTCC=$CC
+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+test -z "$LD" && LD=ld
+test -z "$LN_S" && LN_S="ln -s"
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
+test -z "$NM" && NM=nm
+test -z "$SED" && SED=sed
+test -z "$OBJDUMP" && OBJDUMP=objdump
+test -z "$RANLIB" && RANLIB=:
+test -z "$STRIP" && STRIP=:
+test -z "$ac_objext" && ac_objext=o
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+  case $host_os in
+  openbsd*)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
+    ;;
+  *)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
+    ;;
+  esac
+  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
+fi
+
+_LT_CC_BASENAME([$compiler])
+
+# Only perform the check for file, if the check method requires it
+case $deplibs_check_method in
+file_magic*)
+  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+    AC_PATH_MAGIC
+  fi
+  ;;
+esac
+
+_LT_REQUIRED_DARWIN_CHECKS
+
+AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no)
+AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
+enable_win32_dll=yes, enable_win32_dll=no)
+
+AC_ARG_ENABLE([libtool-lock],
+    [AC_HELP_STRING([--disable-libtool-lock],
+       [avoid locking (might break parallel builds)])])
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+
+AC_ARG_WITH([pic],
+    [AC_HELP_STRING([--with-pic],
+       [try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
+    [pic_mode="$withval"],
+    [pic_mode=default])
+test -z "$pic_mode" && pic_mode=default
+
+# Use C for the default configuration in the libtool script
+tagname=
+AC_LIBTOOL_LANG_C_CONFIG
+_LT_AC_TAGCONFIG
+])# AC_LIBTOOL_SETUP
+
+
+# _LT_AC_SYS_COMPILER
+# -------------------
+AC_DEFUN([_LT_AC_SYS_COMPILER],
+[AC_REQUIRE([AC_PROG_CC])dnl
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+])# _LT_AC_SYS_COMPILER
+
+
+# _LT_CC_BASENAME(CC)
+# -------------------
+# Calculate cc_basename.  Skip known compiler wrappers and cross-prefix.
+AC_DEFUN([_LT_CC_BASENAME],
+[for cc_temp in $1""; do
+  case $cc_temp in
+    compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
+    distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+])
+
+
+# _LT_COMPILER_BOILERPLATE
+# ------------------------
+# Check for compiler boilerplate output or warnings with
+# the simple compiler test code.
+AC_DEFUN([_LT_COMPILER_BOILERPLATE],
+[AC_REQUIRE([LT_AC_PROG_SED])dnl
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$rm conftest*
+])# _LT_COMPILER_BOILERPLATE
+
+
+# _LT_LINKER_BOILERPLATE
+# ----------------------
+# Check for linker boilerplate output or warnings with
+# the simple link test code.
+AC_DEFUN([_LT_LINKER_BOILERPLATE],
+[AC_REQUIRE([LT_AC_PROG_SED])dnl
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$rm -r conftest*
+])# _LT_LINKER_BOILERPLATE
+
+# _LT_REQUIRED_DARWIN_CHECKS
+# --------------------------
+# Check for some things on darwin
+AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS],[
+  case $host_os in
+    rhapsody* | darwin*)
+    AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:])
+    AC_CHECK_TOOL([NMEDIT], [nmedit], [:])
+
+    AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod],
+      [lt_cv_apple_cc_single_mod=no
+      if test -z "${LT_MULTI_MODULE}"; then
+   # By default we will add the -single_module flag. You can override
+   # by either setting the environment variable LT_MULTI_MODULE
+   # non-empty at configure time, or by adding -multi_module to the
+   # link flags.
+   echo "int foo(void){return 1;}" > conftest.c
+   $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+     -dynamiclib ${wl}-single_module conftest.c
+   if test -f libconftest.dylib; then
+     lt_cv_apple_cc_single_mod=yes
+     rm -rf libconftest.dylib*
+   fi
+   rm conftest.c
+      fi])
+    AC_CACHE_CHECK([for -exported_symbols_list linker flag],
+      [lt_cv_ld_exported_symbols_list],
+      [lt_cv_ld_exported_symbols_list=no
+      save_LDFLAGS=$LDFLAGS
+      echo "_main" > conftest.sym
+      LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
+      AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
+   [lt_cv_ld_exported_symbols_list=yes],
+   [lt_cv_ld_exported_symbols_list=no])
+   LDFLAGS="$save_LDFLAGS"
+    ])
+    case $host_os in
+    rhapsody* | darwin1.[[0123]])
+      _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+    darwin1.*)
+     _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+    darwin*)
+      # if running on 10.5 or later, the deployment target defaults
+      # to the OS version, if on x86, and 10.4, the deployment
+      # target defaults to 10.4. Don't you love it?
+      case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
+   10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
+     _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+   10.[[012]]*)
+     _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+   10.*)
+     _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+      esac
+    ;;
+  esac
+    if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+      _lt_dar_single_mod='$single_module'
+    fi
+    if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
+      _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+    else
+      _lt_dar_export_syms="~$NMEDIT -s \$output_objdir/\${libname}-symbols.expsym \${lib}"
+    fi
+    if test "$DSYMUTIL" != ":"; then
+      _lt_dsymutil="~$DSYMUTIL \$lib || :"
+    else
+      _lt_dsymutil=
+    fi
+    ;;
+  esac
+])
+
+# _LT_AC_SYS_LIBPATH_AIX
+# ----------------------
+# Links a minimal program and checks the executable
+# for the system default hardcoded library path. In most cases,
+# this is /usr/lib:/lib, but when the MPI compilers are used
+# the location of the communication and MPI libs are included too.
+# If we don't find anything, use the default library path according
+# to the aix ld manual.
+AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX],
+[AC_REQUIRE([LT_AC_PROG_SED])dnl
+AC_LINK_IFELSE(AC_LANG_PROGRAM,[
+lt_aix_libpath_sed='
+    /Import File Strings/,/^$/ {
+       /^0/ {
+           s/^0  *\(.*\)$/\1/
+           p
+       }
+    }'
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+# Check for a 64-bit object if we didn't find anything.
+if test -z "$aix_libpath"; then
+  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+fi],[])
+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+])# _LT_AC_SYS_LIBPATH_AIX
+
+
+# _LT_AC_SHELL_INIT(ARG)
+# ----------------------
+AC_DEFUN([_LT_AC_SHELL_INIT],
+[ifdef([AC_DIVERSION_NOTICE],
+            [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
+        [AC_DIVERT_PUSH(NOTICE)])
+$1
+AC_DIVERT_POP
+])# _LT_AC_SHELL_INIT
+
+
+# _LT_AC_PROG_ECHO_BACKSLASH
+# --------------------------
+# Add some code to the start of the generated configure script which
+# will find an echo command which doesn't interpret backslashes.
+AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH],
+[_LT_AC_SHELL_INIT([
+# Check that we are running under the correct shell.
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+case X$ECHO in
+X*--fallback-echo)
+  # Remove one level of quotation (which was required for Make).
+  ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
+  ;;
+esac
+
+echo=${ECHO-echo}
+if test "X[$]1" = X--no-reexec; then
+  # Discard the --no-reexec flag, and continue.
+  shift
+elif test "X[$]1" = X--fallback-echo; then
+  # Avoid inline document here, it may be left over
+  :
+elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
+  # Yippee, $echo works!
+  :
+else
+  # Restart under the correct shell.
+  exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
+fi
+
+if test "X[$]1" = X--fallback-echo; then
+  # used as fallback echo
+  shift
+  cat <<EOF
+[$]*
+EOF
+  exit 0
+fi
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+if test -z "$ECHO"; then
+if test "X${echo_test_string+set}" != Xset; then
+# find a string as large as possible, as long as the shell can cope with it
+  for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
+    # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
+    if (echo_test_string=`eval $cmd`) 2>/dev/null &&
+       echo_test_string=`eval $cmd` &&
+       (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
+    then
+      break
+    fi
+  done
+fi
+
+if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
+   echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
+   test "X$echo_testing_string" = "X$echo_test_string"; then
+  :
+else
+  # The Solaris, AIX, and Digital Unix default echo programs unquote
+  # backslashes.  This makes it impossible to quote backslashes using
+  #   echo "$something" | sed 's/\\/\\\\/g'
+  #
+  # So, first we look for a working echo in the user's PATH.
+
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  for dir in $PATH /usr/ucb; do
+    IFS="$lt_save_ifs"
+    if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
+       test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
+       echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
+       test "X$echo_testing_string" = "X$echo_test_string"; then
+      echo="$dir/echo"
+      break
+    fi
+  done
+  IFS="$lt_save_ifs"
+
+  if test "X$echo" = Xecho; then
+    # We didn't find a better echo, so look for alternatives.
+    if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
+       echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
+       test "X$echo_testing_string" = "X$echo_test_string"; then
+      # This shell has a builtin print -r that does the trick.
+      echo='print -r'
+    elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
+        test "X$CONFIG_SHELL" != X/bin/ksh; then
+      # If we have ksh, try running configure again with it.
+      ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
+      export ORIGINAL_CONFIG_SHELL
+      CONFIG_SHELL=/bin/ksh
+      export CONFIG_SHELL
+      exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
+    else
+      # Try using printf.
+      echo='printf %s\n'
+      if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
+        echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
+        test "X$echo_testing_string" = "X$echo_test_string"; then
+       # Cool, printf works
+       :
+      elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
+          test "X$echo_testing_string" = 'X\t' &&
+          echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+          test "X$echo_testing_string" = "X$echo_test_string"; then
+       CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
+       export CONFIG_SHELL
+       SHELL="$CONFIG_SHELL"
+       export SHELL
+       echo="$CONFIG_SHELL [$]0 --fallback-echo"
+      elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
+          test "X$echo_testing_string" = 'X\t' &&
+          echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+          test "X$echo_testing_string" = "X$echo_test_string"; then
+       echo="$CONFIG_SHELL [$]0 --fallback-echo"
+      else
+       # maybe with a smaller string...
+       prev=:
+
+       for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
+         if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
+         then
+           break
+         fi
+         prev="$cmd"
+       done
+
+       if test "$prev" != 'sed 50q "[$]0"'; then
+         echo_test_string=`eval $prev`
+         export echo_test_string
+         exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
+       else
+         # Oops.  We lost completely, so just stick with echo.
+         echo=echo
+       fi
+      fi
+    fi
+  fi
+fi
+fi
+
+# Copy echo and quote the copy suitably for passing to libtool from
+# the Makefile, instead of quoting the original, which is used later.
+ECHO=$echo
+if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
+   ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
+fi
+
+AC_SUBST(ECHO)
+])])# _LT_AC_PROG_ECHO_BACKSLASH
+
+
+# _LT_AC_LOCK
+# -----------
+AC_DEFUN([_LT_AC_LOCK],
+[AC_ARG_ENABLE([libtool-lock],
+    [AC_HELP_STRING([--disable-libtool-lock],
+       [avoid locking (might break parallel builds)])])
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+ia64-*-hpux*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if AC_TRY_EVAL(ac_compile); then
+    case `/usr/bin/file conftest.$ac_objext` in
+    *ELF-32*)
+      HPUX_IA64_MODE="32"
+      ;;
+    *ELF-64*)
+      HPUX_IA64_MODE="64"
+      ;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+*-*-irix6*)
+  # Find out which ABI we are using.
+  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
+  if AC_TRY_EVAL(ac_compile); then
+   if test "$lt_cv_prog_gnu_ld" = yes; then
+    case `/usr/bin/file conftest.$ac_objext` in
+    *32-bit*)
+      LD="${LD-ld} -melf32bsmip"
+      ;;
+    *N32*)
+      LD="${LD-ld} -melf32bmipn32"
+      ;;
+    *64-bit*)
+      LD="${LD-ld} -melf64bmip"
+      ;;
+    esac
+   else
+    case `/usr/bin/file conftest.$ac_objext` in
+    *32-bit*)
+      LD="${LD-ld} -32"
+      ;;
+    *N32*)
+      LD="${LD-ld} -n32"
+      ;;
+    *64-bit*)
+      LD="${LD-ld} -64"
+      ;;
+    esac
+   fi
+  fi
+  rm -rf conftest*
+  ;;
+
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+s390*-*linux*|sparc*-*linux*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if AC_TRY_EVAL(ac_compile); then
+    case `/usr/bin/file conftest.o` in
+    *32-bit*)
+      case $host in
+        x86_64-*kfreebsd*-gnu)
+          LD="${LD-ld} -m elf_i386_fbsd"
+          ;;
+        x86_64-*linux*)
+          LD="${LD-ld} -m elf_i386"
+          ;;
+        ppc64-*linux*|powerpc64-*linux*)
+          LD="${LD-ld} -m elf32ppclinux"
+          ;;
+        s390x-*linux*)
+          LD="${LD-ld} -m elf_s390"
+          ;;
+        sparc64-*linux*)
+          LD="${LD-ld} -m elf32_sparc"
+          ;;
+      esac
+      ;;
+    *64-bit*)
+      case $host in
+        x86_64-*kfreebsd*-gnu)
+          LD="${LD-ld} -m elf_x86_64_fbsd"
+          ;;
+        x86_64-*linux*)
+          LD="${LD-ld} -m elf_x86_64"
+          ;;
+        ppc*-*linux*|powerpc*-*linux*)
+          LD="${LD-ld} -m elf64ppc"
+          ;;
+        s390*-*linux*)
+          LD="${LD-ld} -m elf64_s390"
+          ;;
+        sparc*-*linux*)
+          LD="${LD-ld} -m elf64_sparc"
+          ;;
+      esac
+      ;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+
+*-*-sco3.2v5*)
+  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+  SAVE_CFLAGS="$CFLAGS"
+  CFLAGS="$CFLAGS -belf"
+  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
+    [AC_LANG_PUSH(C)
+     AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
+     AC_LANG_POP])
+  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+    CFLAGS="$SAVE_CFLAGS"
+  fi
+  ;;
+sparc*-*solaris*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if AC_TRY_EVAL(ac_compile); then
+    case `/usr/bin/file conftest.o` in
+    *64-bit*)
+      case $lt_cv_prog_gnu_ld in
+      yes*) LD="${LD-ld} -m elf64_sparc" ;;
+      *)
+        if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+         LD="${LD-ld} -64"
+       fi
+       ;;
+      esac
+      ;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+
+AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
+[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
+  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+  AC_CHECK_TOOL(AS, as, false)
+  AC_CHECK_TOOL(OBJDUMP, objdump, false)
+  ;;
+  ])
+esac
+
+need_locks="$enable_libtool_lock"
+
+])# _LT_AC_LOCK
+
+
+# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+#              [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
+# ----------------------------------------------------------------
+# Check whether the given compiler option works
+AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION],
+[AC_REQUIRE([LT_AC_PROG_SED])
+AC_CACHE_CHECK([$1], [$2],
+  [$2=no
+  ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="$3"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&AS_MESSAGE_LOG_FD
+   echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       $2=yes
+     fi
+   fi
+   $rm conftest*
+])
+
+if test x"[$]$2" = xyes; then
+    ifelse([$5], , :, [$5])
+else
+    ifelse([$6], , :, [$6])
+fi
+])# AC_LIBTOOL_COMPILER_OPTION
+
+
+# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+#                          [ACTION-SUCCESS], [ACTION-FAILURE])
+# ------------------------------------------------------------
+# Check whether the given compiler option works
+AC_DEFUN([AC_LIBTOOL_LINKER_OPTION],
+[AC_REQUIRE([LT_AC_PROG_SED])dnl
+AC_CACHE_CHECK([$1], [$2],
+  [$2=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS $3"
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&AS_MESSAGE_LOG_FD
+       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         $2=yes
+       fi
+     else
+       $2=yes
+     fi
+   fi
+   $rm -r conftest*
+   LDFLAGS="$save_LDFLAGS"
+])
+
+if test x"[$]$2" = xyes; then
+    ifelse([$4], , :, [$4])
+else
+    ifelse([$5], , :, [$5])
+fi
+])# AC_LIBTOOL_LINKER_OPTION
+
+
+# AC_LIBTOOL_SYS_MAX_CMD_LEN
+# --------------------------
+AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN],
+[# find the maximum length of command line arguments
+AC_MSG_CHECKING([the maximum length of command line arguments])
+AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
+  i=0
+  teststring="ABCD"
+
+  case $build_os in
+  msdosdjgpp*)
+    # On DJGPP, this test can blow up pretty badly due to problems in libc
+    # (any single argument exceeding 2000 bytes causes a buffer overrun
+    # during glob expansion).  Even if it were fixed, the result of this
+    # check would be larger than it should be.
+    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
+    ;;
+
+  gnu*)
+    # Under GNU Hurd, this test is not required because there is
+    # no limit to the length of command line arguments.
+    # Libtool will interpret -1 as no limit whatsoever
+    lt_cv_sys_max_cmd_len=-1;
+    ;;
+
+  cygwin* | mingw*)
+    # On Win9x/ME, this test blows up -- it succeeds, but takes
+    # about 5 minutes as the teststring grows exponentially.
+    # Worse, since 9x/ME are not pre-emptively multitasking,
+    # you end up with a "frozen" computer, even though with patience
+    # the test eventually succeeds (with a max line length of 256k).
+    # Instead, let's just punt: use the minimum linelength reported by
+    # all of the supported platforms: 8192 (on NT/2K/XP).
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  amigaos*)
+    # On AmigaOS with pdksh, this test takes hours, literally.
+    # So we just punt and use a minimum line length of 8192.
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+    # This has been around since 386BSD, at least.  Likely further.
+    if test -x /sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+    elif test -x /usr/sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+    else
+      lt_cv_sys_max_cmd_len=65536      # usable default for all BSDs
+    fi
+    # And add a safety zone
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    ;;
+
+  interix*)
+    # We know the value 262144 and hardcode it with a safety zone (like BSD)
+    lt_cv_sys_max_cmd_len=196608
+    ;;
+
+  osf*)
+    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+    # nice to cause kernel panics so lets avoid the loop below.
+    # First set a reasonable default.
+    lt_cv_sys_max_cmd_len=16384
+    #
+    if test -x /sbin/sysconfig; then
+      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+        *1*) lt_cv_sys_max_cmd_len=-1 ;;
+      esac
+    fi
+    ;;
+  sco3.2v5*)
+    lt_cv_sys_max_cmd_len=102400
+    ;;
+  sysv5* | sco5v6* | sysv4.2uw2*)
+    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+    if test -n "$kargmax"; then
+      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[       ]]//'`
+    else
+      lt_cv_sys_max_cmd_len=32768
+    fi
+    ;;
+  *)
+    lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+    if test -n "$lt_cv_sys_max_cmd_len"; then
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    else
+      SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+      while (test "X"`$SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \
+              = "XX$teststring") >/dev/null 2>&1 &&
+             new_result=`expr "X$teststring" : ".*" 2>&1` &&
+             lt_cv_sys_max_cmd_len=$new_result &&
+             test $i != 17 # 1/2 MB should be enough
+      do
+        i=`expr $i + 1`
+        teststring=$teststring$teststring
+      done
+      teststring=
+      # Add a significant safety factor because C++ compilers can tack on massive
+      # amounts of additional arguments before passing them to the linker.
+      # It appears as though 1/2 is a usable value.
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+    fi
+    ;;
+  esac
+])
+if test -n $lt_cv_sys_max_cmd_len ; then
+  AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
+else
+  AC_MSG_RESULT(none)
+fi
+])# AC_LIBTOOL_SYS_MAX_CMD_LEN
+
+
+# _LT_AC_CHECK_DLFCN
+# ------------------
+AC_DEFUN([_LT_AC_CHECK_DLFCN],
+[AC_CHECK_HEADERS(dlfcn.h)dnl
+])# _LT_AC_CHECK_DLFCN
+
+
+# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
+#                           ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
+# ---------------------------------------------------------------------
+AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF],
+[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
+if test "$cross_compiling" = yes; then :
+  [$4]
+else
+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+  lt_status=$lt_dlunknown
+  cat > conftest.$ac_ext <<EOF
+[#line __oline__ "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+#  define LT_DLGLOBAL          RTLD_GLOBAL
+#else
+#  ifdef DL_GLOBAL
+#    define LT_DLGLOBAL                DL_GLOBAL
+#  else
+#    define LT_DLGLOBAL                0
+#  endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+#  ifdef RTLD_LAZY
+#    define LT_DLLAZY_OR_NOW           RTLD_LAZY
+#  else
+#    ifdef DL_LAZY
+#      define LT_DLLAZY_OR_NOW         DL_LAZY
+#    else
+#      ifdef RTLD_NOW
+#        define LT_DLLAZY_OR_NOW       RTLD_NOW
+#      else
+#        ifdef DL_NOW
+#          define LT_DLLAZY_OR_NOW     DL_NOW
+#        else
+#          define LT_DLLAZY_OR_NOW     0
+#        endif
+#      endif
+#    endif
+#  endif
+#endif
+
+#ifdef __cplusplus
+extern "C" void exit (int);
+#endif
+
+void fnord() { int i=42;}
+int main ()
+{
+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+  int status = $lt_dlunknown;
+
+  if (self)
+    {
+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
+      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+      /* dlclose (self); */
+    }
+  else
+    puts (dlerror ());
+
+    exit (status);
+}]
+EOF
+  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
+    (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
+    lt_status=$?
+    case x$lt_status in
+      x$lt_dlno_uscore) $1 ;;
+      x$lt_dlneed_uscore) $2 ;;
+      x$lt_dlunknown|x*) $3 ;;
+    esac
+  else :
+    # compilation failed
+    $3
+  fi
+fi
+rm -fr conftest*
+])# _LT_AC_TRY_DLOPEN_SELF
+
+
+# AC_LIBTOOL_DLOPEN_SELF
+# ----------------------
+AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF],
+[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
+if test "x$enable_dlopen" != xyes; then
+  enable_dlopen=unknown
+  enable_dlopen_self=unknown
+  enable_dlopen_self_static=unknown
+else
+  lt_cv_dlopen=no
+  lt_cv_dlopen_libs=
+
+  case $host_os in
+  beos*)
+    lt_cv_dlopen="load_add_on"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+    ;;
+
+  mingw* | pw32*)
+    lt_cv_dlopen="LoadLibrary"
+    lt_cv_dlopen_libs=
+   ;;
+
+  cygwin*)
+    lt_cv_dlopen="dlopen"
+    lt_cv_dlopen_libs=
+   ;;
+
+  darwin*)
+  # if libdl is installed we need to link against it
+    AC_CHECK_LIB([dl], [dlopen],
+               [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
+    lt_cv_dlopen="dyld"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+    ])
+   ;;
+
+  *)
+    AC_CHECK_FUNC([shl_load],
+         [lt_cv_dlopen="shl_load"],
+      [AC_CHECK_LIB([dld], [shl_load],
+           [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"],
+       [AC_CHECK_FUNC([dlopen],
+             [lt_cv_dlopen="dlopen"],
+         [AC_CHECK_LIB([dl], [dlopen],
+               [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
+           [AC_CHECK_LIB([svld], [dlopen],
+                 [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
+             [AC_CHECK_LIB([dld], [dld_link],
+                   [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"])
+             ])
+           ])
+         ])
+       ])
+      ])
+    ;;
+  esac
+
+  if test "x$lt_cv_dlopen" != xno; then
+    enable_dlopen=yes
+  else
+    enable_dlopen=no
+  fi
+
+  case $lt_cv_dlopen in
+  dlopen)
+    save_CPPFLAGS="$CPPFLAGS"
+    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+
+    save_LDFLAGS="$LDFLAGS"
+    wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+
+    save_LIBS="$LIBS"
+    LIBS="$lt_cv_dlopen_libs $LIBS"
+
+    AC_CACHE_CHECK([whether a program can dlopen itself],
+         lt_cv_dlopen_self, [dnl
+         _LT_AC_TRY_DLOPEN_SELF(
+           lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
+           lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
+    ])
+
+    if test "x$lt_cv_dlopen_self" = xyes; then
+      wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
+      AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
+         lt_cv_dlopen_self_static, [dnl
+         _LT_AC_TRY_DLOPEN_SELF(
+           lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
+           lt_cv_dlopen_self_static=no,  lt_cv_dlopen_self_static=cross)
+      ])
+    fi
+
+    CPPFLAGS="$save_CPPFLAGS"
+    LDFLAGS="$save_LDFLAGS"
+    LIBS="$save_LIBS"
+    ;;
+  esac
+
+  case $lt_cv_dlopen_self in
+  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+  *) enable_dlopen_self=unknown ;;
+  esac
+
+  case $lt_cv_dlopen_self_static in
+  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+  *) enable_dlopen_self_static=unknown ;;
+  esac
+fi
+])# AC_LIBTOOL_DLOPEN_SELF
+
+
+# AC_LIBTOOL_PROG_CC_C_O([TAGNAME])
+# ---------------------------------
+# Check to see if options -c and -o are simultaneously supported by compiler
+AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O],
+[AC_REQUIRE([LT_AC_PROG_SED])dnl
+AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
+AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
+  [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
+  [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
+   $rm -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&AS_MESSAGE_LOG_FD
+   echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+     fi
+   fi
+   chmod u+w . 2>&AS_MESSAGE_LOG_FD
+   $rm conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
+   $rm out/* && rmdir out
+   cd ..
+   rmdir conftest
+   $rm conftest*
+])
+])# AC_LIBTOOL_PROG_CC_C_O
+
+
+# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME])
+# -----------------------------------------
+# Check to see if we can do hard links to lock some files if needed
+AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS],
+[AC_REQUIRE([_LT_AC_LOCK])dnl
+
+hard_links="nottested"
+if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
+  # do not overwrite the value of need_locks provided by the user
+  AC_MSG_CHECKING([if we can lock with hard links])
+  hard_links=yes
+  $rm conftest*
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  touch conftest.a
+  ln conftest.a conftest.b 2>&5 || hard_links=no
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  AC_MSG_RESULT([$hard_links])
+  if test "$hard_links" = no; then
+    AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
+    need_locks=warn
+  fi
+else
+  need_locks=no
+fi
+])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS
+
+
+# AC_LIBTOOL_OBJDIR
+# -----------------
+AC_DEFUN([AC_LIBTOOL_OBJDIR],
+[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
+[rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+  lt_cv_objdir=.libs
+else
+  # MS-DOS does not allow filenames that begin with a dot.
+  lt_cv_objdir=_libs
+fi
+rmdir .libs 2>/dev/null])
+objdir=$lt_cv_objdir
+])# AC_LIBTOOL_OBJDIR
+
+
+# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME])
+# ----------------------------------------------
+# Check hardcoding attributes.
+AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH],
+[AC_MSG_CHECKING([how to hardcode library paths into programs])
+_LT_AC_TAGVAR(hardcode_action, $1)=
+if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \
+   test -n "$_LT_AC_TAGVAR(runpath_var, $1)" || \
+   test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
+
+  # We can hardcode non-existant directories.
+  if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
+     test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then
+    # Linking always hardcodes the temporary library directory.
+    _LT_AC_TAGVAR(hardcode_action, $1)=relink
+  else
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    _LT_AC_TAGVAR(hardcode_action, $1)=immediate
+  fi
+else
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  _LT_AC_TAGVAR(hardcode_action, $1)=unsupported
+fi
+AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)])
+
+if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+     test "$enable_shared" = no; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
+fi
+])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH
+
+
+# AC_LIBTOOL_SYS_LIB_STRIP
+# ------------------------
+AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP],
+[striplib=
+old_striplib=
+AC_MSG_CHECKING([whether stripping libraries is possible])
+if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
+  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+  AC_MSG_RESULT([yes])
+else
+# FIXME - insert some real tests, host_os isn't really good enough
+  case $host_os in
+   darwin*)
+       if test -n "$STRIP" ; then
+         striplib="$STRIP -x"
+         old_striplib="$STRIP -S"
+         AC_MSG_RESULT([yes])
+       else
+  AC_MSG_RESULT([no])
+fi
+       ;;
+   *)
+  AC_MSG_RESULT([no])
+    ;;
+  esac
+fi
+])# AC_LIBTOOL_SYS_LIB_STRIP
+
+
+# AC_LIBTOOL_SYS_DYNAMIC_LINKER
+# -----------------------------
+# PORTME Fill in your ld.so characteristics
+AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER],
+[AC_REQUIRE([LT_AC_PROG_SED])dnl
+AC_MSG_CHECKING([dynamic linker characteristics])
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+m4_if($1,[],[
+if test "$GCC" = yes; then
+  case $host_os in
+    darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
+    *) lt_awk_arg="/^libraries:/" ;;
+  esac
+  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+  if echo "$lt_search_path_spec" | grep ';' >/dev/null ; then
+    # if the path contains ";" then we assume it to be the separator
+    # otherwise default to the standard path separator (i.e. ":") - it is
+    # assumed that no part of a normal pathname contains ";" but that should
+    # okay in the real world where ";" in dirpaths is itself problematic.
+    lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e 's/;/ /g'`
+  else
+    lt_search_path_spec=`echo "$lt_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+  fi
+  # Ok, now we have the path, separated by spaces, we can step through it
+  # and add multilib dir if necessary.
+  lt_tmp_lt_search_path_spec=
+  lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+  for lt_sys_path in $lt_search_path_spec; do
+    if test -d "$lt_sys_path/$lt_multi_os_dir"; then
+      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
+    else
+      test -d "$lt_sys_path" && \
+       lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+    fi
+  done
+  lt_search_path_spec=`echo $lt_tmp_lt_search_path_spec | awk '
+BEGIN {RS=" "; FS="/|\n";} {
+  lt_foo="";
+  lt_count=0;
+  for (lt_i = NF; lt_i > 0; lt_i--) {
+    if ($lt_i != "" && $lt_i != ".") {
+      if ($lt_i == "..") {
+        lt_count++;
+      } else {
+        if (lt_count == 0) {
+          lt_foo="/" $lt_i lt_foo;
+        } else {
+          lt_count--;
+        }
+      }
+    }
+  }
+  if (lt_foo != "") { lt_freq[[lt_foo]]++; }
+  if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
+}'`
+  sys_lib_search_path_spec=`echo $lt_search_path_spec`
+else
+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi])
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+case $host_os in
+aix3*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+  shlibpath_var=LIBPATH
+
+  # AIX 3 has no versioning support, so we append a major version to the name.
+  soname_spec='${libname}${release}${shared_ext}$major'
+  ;;
+
+aix[[4-9]]*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  hardcode_into_libs=yes
+  if test "$host_cpu" = ia64; then
+    # AIX 5 supports IA64
+    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+    shlibpath_var=LD_LIBRARY_PATH
+  else
+    # With GCC up to 2.95.x, collect2 would create an import file
+    # for dependence libraries.  The import file would start with
+    # the line `#! .'.  This would cause the generated library to
+    # depend on `.', always an invalid library.  This was fixed in
+    # development snapshots of GCC prior to 3.0.
+    case $host_os in
+      aix4 | aix4.[[01]] | aix4.[[01]].*)
+      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+          echo ' yes '
+          echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
+       :
+      else
+       can_build_shared=no
+      fi
+      ;;
+    esac
+    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+    # soname into executable. Probably we can add versioning support to
+    # collect2, so additional links can be useful in future.
+    if test "$aix_use_runtimelinking" = yes; then
+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+      # instead of lib<name>.a to let people know that these are not
+      # typical AIX shared libraries.
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    else
+      # We preserve .a as extension for shared libraries through AIX4.2
+      # and later when we are not doing run time linking.
+      library_names_spec='${libname}${release}.a $libname.a'
+      soname_spec='${libname}${release}${shared_ext}$major'
+    fi
+    shlibpath_var=LIBPATH
+  fi
+  ;;
+
+amigaos*)
+  library_names_spec='$libname.ixlibrary $libname.a'
+  # Create ${libname}_ixlibrary.a entries in /sys/libs.
+  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+  ;;
+
+beos*)
+  library_names_spec='${libname}${shared_ext}'
+  dynamic_linker="$host_os ld.so"
+  shlibpath_var=LIBRARY_PATH
+  ;;
+
+bsdi[[45]]*)
+  version_type=linux
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+  # the default ld.so.conf also contains /usr/contrib/lib and
+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+  # libtool to hard-code these into programs
+  ;;
+
+cygwin* | mingw* | pw32*)
+  version_type=windows
+  shrext_cmds=".dll"
+  need_version=no
+  need_lib_prefix=no
+
+  case $GCC,$host_os in
+  yes,cygwin* | yes,mingw* | yes,pw32*)
+    library_names_spec='$libname.dll.a'
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname~
+      chmod a+x \$dldir/$dlname'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $rm \$dlpath'
+    shlibpath_overrides_runpath=yes
+
+    case $host_os in
+    cygwin*)
+      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
+      ;;
+    mingw*)
+      # MinGW DLLs use traditional 'lib' prefix
+      soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+      sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+      if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null]; then
+        # It is most probably a Windows format PATH printed by
+        # mingw gcc, but we are running on Cygwin. Gcc prints its search
+        # path with ; separators, and with drive letters. We can handle the
+        # drive letters (cygwin fileutils understands them), so leave them,
+        # especially as we might pass files found there to a mingw objdump,
+        # which wouldn't understand a cygwinified path. Ahh.
+        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+      else
+        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+      fi
+      ;;
+    pw32*)
+      # pw32 DLLs use 'pw' prefix rather than 'lib'
+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    esac
+    ;;
+
+  *)
+    library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
+    ;;
+  esac
+  dynamic_linker='Win32 ld.exe'
+  # FIXME: first we should search . and the directory the executable is in
+  shlibpath_var=PATH
+  ;;
+
+darwin* | rhapsody*)
+  dynamic_linker="$host_os dyld"
+  version_type=darwin
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+  soname_spec='${libname}${release}${major}$shared_ext'
+  shlibpath_overrides_runpath=yes
+  shlibpath_var=DYLD_LIBRARY_PATH
+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+  m4_if([$1], [],[
+  sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"]) 
+  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+  ;;
+
+dgux*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+freebsd1*)
+  dynamic_linker=no
+  ;;
+
+freebsd* | dragonfly*)
+  # DragonFly does not have aout.  When/if they implement a new
+  # versioning mechanism, adjust this.
+  if test -x /usr/bin/objformat; then
+    objformat=`/usr/bin/objformat`
+  else
+    case $host_os in
+    freebsd[[123]]*) objformat=aout ;;
+    *) objformat=elf ;;
+    esac
+  fi
+  version_type=freebsd-$objformat
+  case $version_type in
+    freebsd-elf*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+      need_version=no
+      need_lib_prefix=no
+      ;;
+    freebsd-*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+      need_version=yes
+      ;;
+  esac
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_os in
+  freebsd2*)
+    shlibpath_overrides_runpath=yes
+    ;;
+  freebsd3.[[01]]* | freebsdelf3.[[01]]*)
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \
+  freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1)
+    shlibpath_overrides_runpath=no
+    hardcode_into_libs=yes
+    ;;
+  *) # from 4.6 on, and DragonFly
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  esac
+  ;;
+
+gnu*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  hardcode_into_libs=yes
+  ;;
+
+hpux9* | hpux10* | hpux11*)
+  # Give a soname corresponding to the major version so that dld.sl refuses to
+  # link against other versions.
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  case $host_cpu in
+  ia64*)
+    shrext_cmds='.so'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.so"
+    shlibpath_var=LD_LIBRARY_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    if test "X$HPUX_IA64_MODE" = X32; then
+      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+    else
+      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+    fi
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+   hppa*64*)
+     shrext_cmds='.sl'
+     hardcode_into_libs=yes
+     dynamic_linker="$host_os dld.sl"
+     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+     soname_spec='${libname}${release}${shared_ext}$major'
+     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+     ;;
+   *)
+    shrext_cmds='.sl'
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=SHLIB_PATH
+    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    ;;
+  esac
+  # HP-UX runs *really* slowly unless shared libraries are mode 555.
+  postinstall_cmds='chmod 555 $lib'
+  ;;
+
+interix[[3-9]]*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $host_os in
+    nonstopux*) version_type=nonstopux ;;
+    *)
+       if test "$lt_cv_prog_gnu_ld" = yes; then
+               version_type=linux
+       else
+               version_type=irix
+       fi ;;
+  esac
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+  case $host_os in
+  irix5* | nonstopux*)
+    libsuff= shlibsuff=
+    ;;
+  *)
+    case $LD in # libtool.m4 will add one of these switches to LD
+    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+      libsuff= shlibsuff= libmagic=32-bit;;
+    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+      libsuff=32 shlibsuff=N32 libmagic=N32;;
+    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+      libsuff=64 shlibsuff=64 libmagic=64-bit;;
+    *) libsuff= shlibsuff= libmagic=never-match;;
+    esac
+    ;;
+  esac
+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+  hardcode_into_libs=yes
+  ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+  dynamic_linker=no
+  ;;
+
+# This must be Linux ELF.
+linux* | k*bsd*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  # Append ld.so.conf contents to the search path
+  if test -f /etc/ld.so.conf; then
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[         ]*hwcap[        ]/d;s/[:,       ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+  fi
+
+  # We used to test for /lib/ld.so.1 and disable shared libraries on
+  # powerpc, because MkLinux only supported shared libraries with the
+  # GNU dynamic linker.  Since this was broken with cross compilers,
+  # most powerpc-linux boxes support dynamic linking these days and
+  # people can always --disable-shared, the test was removed, and we
+  # assume the GNU/Linux dynamic linker is in use.
+  dynamic_linker='GNU/Linux ld.so'
+  ;;
+
+netbsd*)
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+    dynamic_linker='NetBSD (a.out) ld.so'
+  else
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    dynamic_linker='NetBSD ld.elf_so'
+  fi
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  ;;
+
+newsos6)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+nto-qnx*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+openbsd*)
+  version_type=sunos
+  sys_lib_dlsearch_path_spec="/usr/lib"
+  need_lib_prefix=no
+  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+  case $host_os in
+    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
+    *)                         need_version=no  ;;
+  esac
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    case $host_os in
+      openbsd2.[[89]] | openbsd2.[[89]].*)
+       shlibpath_overrides_runpath=no
+       ;;
+      *)
+       shlibpath_overrides_runpath=yes
+       ;;
+      esac
+  else
+    shlibpath_overrides_runpath=yes
+  fi
+  ;;
+
+os2*)
+  libname_spec='$name'
+  shrext_cmds=".dll"
+  need_lib_prefix=no
+  library_names_spec='$libname${shared_ext} $libname.a'
+  dynamic_linker='OS/2 ld.exe'
+  shlibpath_var=LIBPATH
+  ;;
+
+osf3* | osf4* | osf5*)
+  version_type=osf
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+  ;;
+
+rdos*)
+  dynamic_linker=no
+  ;;
+
+solaris*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  # ldd complains unless libraries are executable
+  postinstall_cmds='chmod +x $lib'
+  ;;
+
+sunos4*)
+  version_type=sunos
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  if test "$with_gnu_ld" = yes; then
+    need_lib_prefix=no
+  fi
+  need_version=yes
+  ;;
+
+sysv4 | sysv4.3*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_vendor in
+    sni)
+      shlibpath_overrides_runpath=no
+      need_lib_prefix=no
+      export_dynamic_flag_spec='${wl}-Blargedynsym'
+      runpath_var=LD_RUN_PATH
+      ;;
+    siemens)
+      need_lib_prefix=no
+      ;;
+    motorola)
+      need_lib_prefix=no
+      need_version=no
+      shlibpath_overrides_runpath=no
+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+      ;;
+  esac
+  ;;
+
+sysv4*MP*)
+  if test -d /usr/nec ;then
+    version_type=linux
+    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+    soname_spec='$libname${shared_ext}.$major'
+    shlibpath_var=LD_LIBRARY_PATH
+  fi
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  version_type=freebsd-elf
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  hardcode_into_libs=yes
+  if test "$with_gnu_ld" = yes; then
+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+    shlibpath_overrides_runpath=no
+  else
+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+    shlibpath_overrides_runpath=yes
+    case $host_os in
+      sco3.2v5*)
+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+       ;;
+    esac
+  fi
+  sys_lib_dlsearch_path_spec='/usr/lib'
+  ;;
+
+uts4*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+*)
+  dynamic_linker=no
+  ;;
+esac
+AC_MSG_RESULT([$dynamic_linker])
+test "$dynamic_linker" = no && can_build_shared=no
+
+AC_CACHE_VAL([lt_cv_sys_lib_search_path_spec],
+[lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec"])
+sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+AC_CACHE_VAL([lt_cv_sys_lib_dlsearch_path_spec],
+[lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec"])
+sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+])# AC_LIBTOOL_SYS_DYNAMIC_LINKER
+
+
+# _LT_AC_TAGCONFIG
+# ----------------
+AC_DEFUN([_LT_AC_TAGCONFIG],
+[AC_REQUIRE([LT_AC_PROG_SED])dnl
+AC_ARG_WITH([tags],
+    [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@],
+        [include additional configurations @<:@automatic@:>@])],
+    [tagnames="$withval"])
+
+if test -f "$ltmain" && test -n "$tagnames"; then
+  if test ! -f "${ofile}"; then
+    AC_MSG_WARN([output file `$ofile' does not exist])
+  fi
+
+  if test -z "$LTCC"; then
+    eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
+    if test -z "$LTCC"; then
+      AC_MSG_WARN([output file `$ofile' does not look like a libtool script])
+    else
+      AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile'])
+    fi
+  fi
+  if test -z "$LTCFLAGS"; then
+    eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`"
+  fi
+
+  # Extract list of available tagged configurations in $ofile.
+  # Note that this assumes the entire list is on one line.
+  available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`
+
+  lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+  for tagname in $tagnames; do
+    IFS="$lt_save_ifs"
+    # Check whether tagname contains only valid characters
+    case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in
+    "") ;;
+    *)  AC_MSG_ERROR([invalid tag name: $tagname])
+       ;;
+    esac
+
+    if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null
+    then
+      AC_MSG_ERROR([tag name \"$tagname\" already exists])
+    fi
+
+    # Update the list of available tags.
+    if test -n "$tagname"; then
+      echo appending configuration tag \"$tagname\" to $ofile
+
+      case $tagname in
+      CXX)
+       if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+           ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+           (test "X$CXX" != "Xg++"))) ; then
+         AC_LIBTOOL_LANG_CXX_CONFIG
+       else
+         tagname=""
+       fi
+       ;;
+
+      F77)
+       if test -n "$F77" && test "X$F77" != "Xno"; then
+         AC_LIBTOOL_LANG_F77_CONFIG
+       else
+         tagname=""
+       fi
+       ;;
+
+      GCJ)
+       if test -n "$GCJ" && test "X$GCJ" != "Xno"; then
+         AC_LIBTOOL_LANG_GCJ_CONFIG
+       else
+         tagname=""
+       fi
+       ;;
+
+      RC)
+       AC_LIBTOOL_LANG_RC_CONFIG
+       ;;
+
+      *)
+       AC_MSG_ERROR([Unsupported tag name: $tagname])
+       ;;
+      esac
+
+      # Append the new tag name to the list of available tags.
+      if test -n "$tagname" ; then
+      available_tags="$available_tags $tagname"
+    fi
+    fi
+  done
+  IFS="$lt_save_ifs"
+
+  # Now substitute the updated list of available tags.
+  if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then
+    mv "${ofile}T" "$ofile"
+    chmod +x "$ofile"
+  else
+    rm -f "${ofile}T"
+    AC_MSG_ERROR([unable to update list of available tagged configurations.])
+  fi
+fi
+])# _LT_AC_TAGCONFIG
+
+
+# AC_LIBTOOL_DLOPEN
+# -----------------
+# enable checks for dlopen support
+AC_DEFUN([AC_LIBTOOL_DLOPEN],
+ [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])
+])# AC_LIBTOOL_DLOPEN
+
+
+# AC_LIBTOOL_WIN32_DLL
+# --------------------
+# declare package support for building win32 DLLs
+AC_DEFUN([AC_LIBTOOL_WIN32_DLL],
+[AC_BEFORE([$0], [AC_LIBTOOL_SETUP])
+])# AC_LIBTOOL_WIN32_DLL
+
+
+# AC_ENABLE_SHARED([DEFAULT])
+# ---------------------------
+# implement the --enable-shared flag
+# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
+AC_DEFUN([AC_ENABLE_SHARED],
+[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE([shared],
+    [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
+       [build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])],
+    [p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_shared=yes ;;
+    no) enable_shared=no ;;
+    *)
+      enable_shared=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+       IFS="$lt_save_ifs"
+       if test "X$pkg" = "X$p"; then
+         enable_shared=yes
+       fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac],
+    [enable_shared=]AC_ENABLE_SHARED_DEFAULT)
+])# AC_ENABLE_SHARED
+
+
+# AC_DISABLE_SHARED
+# -----------------
+# set the default shared flag to --disable-shared
+AC_DEFUN([AC_DISABLE_SHARED],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_SHARED(no)
+])# AC_DISABLE_SHARED
+
+
+# AC_ENABLE_STATIC([DEFAULT])
+# ---------------------------
+# implement the --enable-static flag
+# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
+AC_DEFUN([AC_ENABLE_STATIC],
+[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE([static],
+    [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@],
+       [build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])],
+    [p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_static=yes ;;
+    no) enable_static=no ;;
+    *)
+     enable_static=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+       IFS="$lt_save_ifs"
+       if test "X$pkg" = "X$p"; then
+         enable_static=yes
+       fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac],
+    [enable_static=]AC_ENABLE_STATIC_DEFAULT)
+])# AC_ENABLE_STATIC
+
+
+# AC_DISABLE_STATIC
+# -----------------
+# set the default static flag to --disable-static
+AC_DEFUN([AC_DISABLE_STATIC],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_STATIC(no)
+])# AC_DISABLE_STATIC
+
+
+# AC_ENABLE_FAST_INSTALL([DEFAULT])
+# ---------------------------------
+# implement the --enable-fast-install flag
+# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
+AC_DEFUN([AC_ENABLE_FAST_INSTALL],
+[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE([fast-install],
+    [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
+    [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
+    [p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_fast_install=yes ;;
+    no) enable_fast_install=no ;;
+    *)
+      enable_fast_install=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+       IFS="$lt_save_ifs"
+       if test "X$pkg" = "X$p"; then
+         enable_fast_install=yes
+       fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac],
+    [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT)
+])# AC_ENABLE_FAST_INSTALL
+
+
+# AC_DISABLE_FAST_INSTALL
+# -----------------------
+# set the default to --disable-fast-install
+AC_DEFUN([AC_DISABLE_FAST_INSTALL],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_FAST_INSTALL(no)
+])# AC_DISABLE_FAST_INSTALL
+
+
+# AC_LIBTOOL_PICMODE([MODE])
+# --------------------------
+# implement the --with-pic flag
+# MODE is either `yes' or `no'.  If omitted, it defaults to `both'.
+AC_DEFUN([AC_LIBTOOL_PICMODE],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+pic_mode=ifelse($#,1,$1,default)
+])# AC_LIBTOOL_PICMODE
+
+
+# AC_PROG_EGREP
+# -------------
+# This is predefined starting with Autoconf 2.54, so this conditional
+# definition can be removed once we require Autoconf 2.54 or later.
+m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP],
+[AC_CACHE_CHECK([for egrep], [ac_cv_prog_egrep],
+   [if echo a | (grep -E '(a|b)') >/dev/null 2>&1
+    then ac_cv_prog_egrep='grep -E'
+    else ac_cv_prog_egrep='egrep'
+    fi])
+ EGREP=$ac_cv_prog_egrep
+ AC_SUBST([EGREP])
+])])
+
+
+# AC_PATH_TOOL_PREFIX
+# -------------------
+# find a file program which can recognize shared library
+AC_DEFUN([AC_PATH_TOOL_PREFIX],
+[AC_REQUIRE([AC_PROG_EGREP])dnl
+AC_MSG_CHECKING([for $1])
+AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
+[case $MAGIC_CMD in
+[[\\/*] |  ?:[\\/]*])
+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  ;;
+*)
+  lt_save_MAGIC_CMD="$MAGIC_CMD"
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+dnl $ac_dummy forces splitting on constant user-supplied paths.
+dnl POSIX.2 word splitting is done only on the output of word expansions,
+dnl not every word.  This closes a longstanding sh security hole.
+  ac_dummy="ifelse([$2], , $PATH, [$2])"
+  for ac_dir in $ac_dummy; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$1; then
+      lt_cv_path_MAGIC_CMD="$ac_dir/$1"
+      if test -n "$file_magic_test_file"; then
+       case $deplibs_check_method in
+       "file_magic "*)
+         file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+         MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+         if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+           $EGREP "$file_magic_regex" > /dev/null; then
+           :
+         else
+           cat <<EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+EOF
+         fi ;;
+       esac
+      fi
+      break
+    fi
+  done
+  IFS="$lt_save_ifs"
+  MAGIC_CMD="$lt_save_MAGIC_CMD"
+  ;;
+esac])
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+  AC_MSG_RESULT($MAGIC_CMD)
+else
+  AC_MSG_RESULT(no)
+fi
+])# AC_PATH_TOOL_PREFIX
+
+
+# AC_PATH_MAGIC
+# -------------
+# find a file program which can recognize a shared library
+AC_DEFUN([AC_PATH_MAGIC],
+[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+  if test -n "$ac_tool_prefix"; then
+    AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
+  else
+    MAGIC_CMD=:
+  fi
+fi
+])# AC_PATH_MAGIC
+
+
+# AC_PROG_LD
+# ----------
+# find the pathname to the GNU or non-GNU linker
+AC_DEFUN([AC_PROG_LD],
+[AC_ARG_WITH([gnu-ld],
+    [AC_HELP_STRING([--with-gnu-ld],
+       [assume the C compiler uses GNU ld @<:@default=no@:>@])],
+    [test "$withval" = no || with_gnu_ld=yes],
+    [with_gnu_ld=no])
+AC_REQUIRE([LT_AC_PROG_SED])dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+ac_prog=ld
+if test "$GCC" = yes; then
+  # Check if gcc -print-prog-name=ld gives a path.
+  AC_MSG_CHECKING([for ld used by $CC])
+  case $host in
+  *-*-mingw*)
+    # gcc leaves a trailing carriage return which upsets mingw
+    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+  *)
+    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+  esac
+  case $ac_prog in
+    # Accept absolute paths.
+    [[\\/]]* | ?:[[\\/]]*)
+      re_direlt='/[[^/]][[^/]]*/\.\./'
+      # Canonicalize the pathname of ld
+      ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
+      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+       ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
+      done
+      test -z "$LD" && LD="$ac_prog"
+      ;;
+  "")
+    # If it fails, then pretend we aren't using GCC.
+    ac_prog=ld
+    ;;
+  *)
+    # If it is relative, then search for the first ld in PATH.
+    with_gnu_ld=unknown
+    ;;
+  esac
+elif test "$with_gnu_ld" = yes; then
+  AC_MSG_CHECKING([for GNU ld])
+else
+  AC_MSG_CHECKING([for non-GNU ld])
+fi
+AC_CACHE_VAL(lt_cv_path_LD,
+[if test -z "$LD"; then
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  for ac_dir in $PATH; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+      lt_cv_path_LD="$ac_dir/$ac_prog"
+      # Check to see if the program is GNU ld.  I'd rather use --version,
+      # but apparently some variants of GNU ld only accept -v.
+      # Break only if it was the GNU/non-GNU ld that we prefer.
+      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+      *GNU* | *'with BFD'*)
+       test "$with_gnu_ld" != no && break
+       ;;
+      *)
+       test "$with_gnu_ld" != yes && break
+       ;;
+      esac
+    fi
+  done
+  IFS="$lt_save_ifs"
+else
+  lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi])
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+  AC_MSG_RESULT($LD)
+else
+  AC_MSG_RESULT(no)
+fi
+test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
+AC_PROG_LD_GNU
+])# AC_PROG_LD
+
+
+# AC_PROG_LD_GNU
+# --------------
+AC_DEFUN([AC_PROG_LD_GNU],
+[AC_REQUIRE([AC_PROG_EGREP])dnl
+AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
+[# I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+  lt_cv_prog_gnu_ld=yes
+  ;;
+*)
+  lt_cv_prog_gnu_ld=no
+  ;;
+esac])
+with_gnu_ld=$lt_cv_prog_gnu_ld
+])# AC_PROG_LD_GNU
+
+
+# AC_PROG_LD_RELOAD_FLAG
+# ----------------------
+# find reload flag for linker
+#   -- PORTME Some linkers may need a different reload flag.
+AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
+[AC_CACHE_CHECK([for $LD option to reload object files],
+  lt_cv_ld_reload_flag,
+  [lt_cv_ld_reload_flag='-r'])
+reload_flag=$lt_cv_ld_reload_flag
+case $reload_flag in
+"" | " "*) ;;
+*) reload_flag=" $reload_flag" ;;
+esac
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+  darwin*)
+    if test "$GCC" = yes; then
+      reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+    else
+      reload_cmds='$LD$reload_flag -o $output$reload_objs'
+    fi
+    ;;
+esac
+])# AC_PROG_LD_RELOAD_FLAG
+
+
+# AC_DEPLIBS_CHECK_METHOD
+# -----------------------
+# how to check for library dependencies
+#  -- PORTME fill in with the dynamic library characteristics
+AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
+[AC_CACHE_CHECK([how to recognize dependent libraries],
+lt_cv_deplibs_check_method,
+[lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [[regex]]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given extended regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix[[4-9]]*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+beos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+bsdi[[45]]*)
+  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
+  lt_cv_file_magic_cmd='/usr/bin/file -L'
+  lt_cv_file_magic_test_file=/shlib/libc.so
+  ;;
+
+cygwin*)
+  # func_win32_libid is a shell function defined in ltmain.sh
+  lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+  lt_cv_file_magic_cmd='func_win32_libid'
+  ;;
+
+mingw* | pw32*)
+  # Base MSYS/MinGW do not provide the 'file' command needed by
+  # func_win32_libid shell function, so use a weaker test based on 'objdump',
+  # unless we find 'file', for example because we are cross-compiling.
+  if ( file / ) >/dev/null 2>&1; then
+    lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+    lt_cv_file_magic_cmd='func_win32_libid'
+  else
+    lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+    lt_cv_file_magic_cmd='$OBJDUMP -f'
+  fi
+  ;;
+
+darwin* | rhapsody*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+freebsd* | dragonfly*)
+  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+    case $host_cpu in
+    i*86 )
+      # Not sure whether the presence of OpenBSD here was a mistake.
+      # Let's accept both of them until this is cleared up.
+      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library'
+      lt_cv_file_magic_cmd=/usr/bin/file
+      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+      ;;
+    esac
+  else
+    lt_cv_deplibs_check_method=pass_all
+  fi
+  ;;
+
+gnu*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+hpux10.20* | hpux11*)
+  lt_cv_file_magic_cmd=/usr/bin/file
+  case $host_cpu in
+  ia64*)
+    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
+    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+    ;;
+  hppa*64*)
+    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]']
+    lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
+    ;;
+  *)
+    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
+    lt_cv_file_magic_test_file=/usr/lib/libc.sl
+    ;;
+  esac
+  ;;
+
+interix[[3-9]]*)
+  # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
+  lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$'
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $LD in
+  *-32|*"-32 ") libmagic=32-bit;;
+  *-n32|*"-n32 ") libmagic=N32;;
+  *-64|*"-64 ") libmagic=64-bit;;
+  *) libmagic=never-match;;
+  esac
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+# This must be Linux ELF.
+linux* | k*bsd*-gnu)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+netbsd*)
+  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
+  fi
+  ;;
+
+newos6*)
+  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
+  lt_cv_file_magic_cmd=/usr/bin/file
+  lt_cv_file_magic_test_file=/usr/lib/libnls.so
+  ;;
+
+nto-qnx*)
+  lt_cv_deplibs_check_method=unknown
+  ;;
+
+openbsd*)
+  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
+  fi
+  ;;
+
+osf3* | osf4* | osf5*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+rdos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+solaris*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+sysv4 | sysv4.3*)
+  case $host_vendor in
+  motorola)
+    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
+    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+    ;;
+  ncr)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  sequent)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
+    ;;
+  sni)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
+    lt_cv_file_magic_test_file=/lib/libc.so
+    ;;
+  siemens)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  pc)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  esac
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+esac
+])
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
+])# AC_DEPLIBS_CHECK_METHOD
+
+
+# AC_PROG_NM
+# ----------
+# find the pathname to a BSD-compatible name lister
+AC_DEFUN([AC_PROG_NM],
+[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM,
+[if test -n "$NM"; then
+  # Let the user override the test.
+  lt_cv_path_NM="$NM"
+else
+  lt_nm_to_check="${ac_tool_prefix}nm"
+  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+    lt_nm_to_check="$lt_nm_to_check nm"
+  fi
+  for lt_tmp_nm in $lt_nm_to_check; do
+    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+      IFS="$lt_save_ifs"
+      test -z "$ac_dir" && ac_dir=.
+      tmp_nm="$ac_dir/$lt_tmp_nm"
+      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+       # Check to see if the nm accepts a BSD-compat flag.
+       # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+       #   nm: unknown option "B" ignored
+       # Tru64's nm complains that /dev/null is an invalid object file
+       case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
+       */dev/null* | *'Invalid file or object type'*)
+         lt_cv_path_NM="$tmp_nm -B"
+         break
+         ;;
+       *)
+         case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
+         */dev/null*)
+           lt_cv_path_NM="$tmp_nm -p"
+           break
+           ;;
+         *)
+           lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+           continue # so that we can try to find one that supports BSD flags
+           ;;
+         esac
+         ;;
+       esac
+      fi
+    done
+    IFS="$lt_save_ifs"
+  done
+  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
+fi])
+NM="$lt_cv_path_NM"
+])# AC_PROG_NM
+
+
+# AC_CHECK_LIBM
+# -------------
+# check for math library
+AC_DEFUN([AC_CHECK_LIBM],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+LIBM=
+case $host in
+*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*)
+  # These system don't have libm, or don't need it
+  ;;
+*-ncr-sysv4.3*)
+  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
+  AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
+  ;;
+*)
+  AC_CHECK_LIB(m, cos, LIBM="-lm")
+  ;;
+esac
+])# AC_CHECK_LIBM
+
+
+# AC_LIBLTDL_CONVENIENCE([DIRECTORY])
+# -----------------------------------
+# sets LIBLTDL to the link flags for the libltdl convenience library and
+# LTDLINCL to the include flags for the libltdl header and adds
+# --enable-ltdl-convenience to the configure arguments.  Note that
+# AC_CONFIG_SUBDIRS is not called here.  If DIRECTORY is not provided,
+# it is assumed to be `libltdl'.  LIBLTDL will be prefixed with
+# '${top_builddir}/' and LTDLINCL will be prefixed with '${top_srcdir}/'
+# (note the single quotes!).  If your package is not flat and you're not
+# using automake, define top_builddir and top_srcdir appropriately in
+# the Makefiles.
+AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+  case $enable_ltdl_convenience in
+  no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
+  "") enable_ltdl_convenience=yes
+      ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
+  esac
+  LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
+  LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
+  # For backwards non-gettext consistent compatibility...
+  INCLTDL="$LTDLINCL"
+])# AC_LIBLTDL_CONVENIENCE
+
+
+# AC_LIBLTDL_INSTALLABLE([DIRECTORY])
+# -----------------------------------
+# sets LIBLTDL to the link flags for the libltdl installable library and
+# LTDLINCL to the include flags for the libltdl header and adds
+# --enable-ltdl-install to the configure arguments.  Note that
+# AC_CONFIG_SUBDIRS is not called here.  If DIRECTORY is not provided,
+# and an installed libltdl is not found, it is assumed to be `libltdl'.
+# LIBLTDL will be prefixed with '${top_builddir}/'# and LTDLINCL with
+# '${top_srcdir}/' (note the single quotes!).  If your package is not
+# flat and you're not using automake, define top_builddir and top_srcdir
+# appropriately in the Makefiles.
+# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
+AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+  AC_CHECK_LIB(ltdl, lt_dlinit,
+  [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
+  [if test x"$enable_ltdl_install" = xno; then
+     AC_MSG_WARN([libltdl not installed, but installation disabled])
+   else
+     enable_ltdl_install=yes
+   fi
+  ])
+  if test x"$enable_ltdl_install" = x"yes"; then
+    ac_configure_args="$ac_configure_args --enable-ltdl-install"
+    LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
+    LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
+  else
+    ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
+    LIBLTDL="-lltdl"
+    LTDLINCL=
+  fi
+  # For backwards non-gettext consistent compatibility...
+  INCLTDL="$LTDLINCL"
+])# AC_LIBLTDL_INSTALLABLE
+
+
+# AC_LIBTOOL_CXX
+# --------------
+# enable support for C++ libraries
+AC_DEFUN([AC_LIBTOOL_CXX],
+[AC_REQUIRE([_LT_AC_LANG_CXX])
+])# AC_LIBTOOL_CXX
+
+
+# _LT_AC_LANG_CXX
+# ---------------
+AC_DEFUN([_LT_AC_LANG_CXX],
+[AC_REQUIRE([AC_PROG_CXX])
+AC_REQUIRE([_LT_AC_PROG_CXXCPP])
+_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX])
+])# _LT_AC_LANG_CXX
+
+# _LT_AC_PROG_CXXCPP
+# ------------------
+AC_DEFUN([_LT_AC_PROG_CXXCPP],
+[
+AC_REQUIRE([AC_PROG_CXX])
+if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+    (test "X$CXX" != "Xg++"))) ; then
+  AC_PROG_CXXCPP
+fi
+])# _LT_AC_PROG_CXXCPP
+
+# AC_LIBTOOL_F77
+# --------------
+# enable support for Fortran 77 libraries
+AC_DEFUN([AC_LIBTOOL_F77],
+[AC_REQUIRE([_LT_AC_LANG_F77])
+])# AC_LIBTOOL_F77
+
+
+# _LT_AC_LANG_F77
+# ---------------
+AC_DEFUN([_LT_AC_LANG_F77],
+[AC_REQUIRE([AC_PROG_F77])
+_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}F77])
+])# _LT_AC_LANG_F77
+
+
+# AC_LIBTOOL_GCJ
+# --------------
+# enable support for GCJ libraries
+AC_DEFUN([AC_LIBTOOL_GCJ],
+[AC_REQUIRE([_LT_AC_LANG_GCJ])
+])# AC_LIBTOOL_GCJ
+
+
+# _LT_AC_LANG_GCJ
+# ---------------
+AC_DEFUN([_LT_AC_LANG_GCJ],
+[AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
+  [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
+    [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
+      [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
+        [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
+          [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
+_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}GCJ])
+])# _LT_AC_LANG_GCJ
+
+
+# AC_LIBTOOL_RC
+# -------------
+# enable support for Windows resource files
+AC_DEFUN([AC_LIBTOOL_RC],
+[AC_REQUIRE([LT_AC_PROG_RC])
+_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}RC])
+])# AC_LIBTOOL_RC
+
+
+# AC_LIBTOOL_LANG_C_CONFIG
+# ------------------------
+# Ensure that the configuration vars for the C compiler are
+# suitably defined.  Those variables are subsequently used by
+# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
+AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG])
+AC_DEFUN([_LT_AC_LANG_C_CONFIG],
+[lt_save_CC="$CC"
+AC_LANG_PUSH(C)
+
+# Source file extension for C test sources.
+ac_ext=c
+
+# Object file extension for compiled C test sources.
+objext=o
+_LT_AC_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(){return(0);}'
+
+_LT_AC_SYS_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
+AC_LIBTOOL_PROG_COMPILER_PIC($1)
+AC_LIBTOOL_PROG_CC_C_O($1)
+AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
+AC_LIBTOOL_PROG_LD_SHLIBS($1)
+AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
+AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
+AC_LIBTOOL_SYS_LIB_STRIP
+AC_LIBTOOL_DLOPEN_SELF
+
+# Report which library types will actually be built
+AC_MSG_CHECKING([if libtool supports shared libraries])
+AC_MSG_RESULT([$can_build_shared])
+
+AC_MSG_CHECKING([whether to build shared libraries])
+test "$can_build_shared" = "no" && enable_shared=no
+
+# On AIX, shared libraries and static libraries use the same namespace, and
+# are all built from PIC.
+case $host_os in
+aix3*)
+  test "$enable_shared" = yes && enable_static=no
+  if test -n "$RANLIB"; then
+    archive_cmds="$archive_cmds~\$RANLIB \$lib"
+    postinstall_cmds='$RANLIB $lib'
+  fi
+  ;;
+
+aix[[4-9]]*)
+  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+    test "$enable_shared" = yes && enable_static=no
+  fi
+    ;;
+esac
+AC_MSG_RESULT([$enable_shared])
+
+AC_MSG_CHECKING([whether to build static libraries])
+# Make sure either enable_shared or enable_static is yes.
+test "$enable_shared" = yes || enable_static=yes
+AC_MSG_RESULT([$enable_static])
+
+AC_LIBTOOL_CONFIG($1)
+
+AC_LANG_POP
+CC="$lt_save_CC"
+])# AC_LIBTOOL_LANG_C_CONFIG
+
+
+# AC_LIBTOOL_LANG_CXX_CONFIG
+# --------------------------
+# Ensure that the configuration vars for the C compiler are
+# suitably defined.  Those variables are subsequently used by
+# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
+AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)])
+AC_DEFUN([_LT_AC_LANG_CXX_CONFIG],
+[AC_LANG_PUSH(C++)
+AC_REQUIRE([AC_PROG_CXX])
+AC_REQUIRE([_LT_AC_PROG_CXXCPP])
+
+_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_AC_TAGVAR(allow_undefined_flag, $1)=
+_LT_AC_TAGVAR(always_export_symbols, $1)=no
+_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
+_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_AC_TAGVAR(hardcode_direct, $1)=no
+_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
+_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+_LT_AC_TAGVAR(hardcode_automatic, $1)=no
+_LT_AC_TAGVAR(module_cmds, $1)=
+_LT_AC_TAGVAR(module_expsym_cmds, $1)=
+_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_AC_TAGVAR(no_undefined_flag, $1)=
+_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Dependencies to place before and after the object being linked:
+_LT_AC_TAGVAR(predep_objects, $1)=
+_LT_AC_TAGVAR(postdep_objects, $1)=
+_LT_AC_TAGVAR(predeps, $1)=
+_LT_AC_TAGVAR(postdeps, $1)=
+_LT_AC_TAGVAR(compiler_lib_search_path, $1)=
+_LT_AC_TAGVAR(compiler_lib_search_dirs, $1)=
+
+# Source file extension for C++ test sources.
+ac_ext=cpp
+
+# Object file extension for compiled C++ test sources.
+objext=o
+_LT_AC_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }'
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_AC_SYS_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC=$CC
+lt_save_LD=$LD
+lt_save_GCC=$GCC
+GCC=$GXX
+lt_save_with_gnu_ld=$with_gnu_ld
+lt_save_path_LD=$lt_cv_path_LD
+if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
+  lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
+else
+  $as_unset lt_cv_prog_gnu_ld
+fi
+if test -n "${lt_cv_path_LDCXX+set}"; then
+  lt_cv_path_LD=$lt_cv_path_LDCXX
+else
+  $as_unset lt_cv_path_LD
+fi
+test -z "${LDCXX+set}" || LD=$LDCXX
+CC=${CXX-"c++"}
+compiler=$CC
+_LT_AC_TAGVAR(compiler, $1)=$CC
+_LT_CC_BASENAME([$compiler])
+
+# We don't want -fno-exception wen compiling C++ code, so set the
+# no_builtin_flag separately
+if test "$GXX" = yes; then
+  _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
+else
+  _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
+fi
+
+if test "$GXX" = yes; then
+  # Set up default GNU C++ configuration
+
+  AC_PROG_LD
+
+  # Check if GNU C++ uses GNU ld as the underlying linker, since the
+  # archiving commands below assume that GNU ld is being used.
+  if test "$with_gnu_ld" = yes; then
+    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+
+    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
+    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+
+    # If archive_cmds runs LD, not CC, wlarc should be empty
+    # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
+    #     investigate it a little bit more. (MM)
+    wlarc='${wl}'
+
+    # ancient GNU ld didn't support --whole-archive et. al.
+    if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
+       grep 'no-whole-archive' > /dev/null; then
+      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+    else
+      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
+    fi
+  else
+    with_gnu_ld=no
+    wlarc=
+
+    # A generic and very simple default shared library creation
+    # command for GNU C++ for the case where it uses the native
+    # linker, instead of GNU ld.  If possible, this setting should
+    # overridden to take advantage of the native linker features on
+    # the platform it is being used on.
+    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+  fi
+
+  # Commands to make compiler produce verbose output that lists
+  # what "hidden" libraries, object files and flags are used when
+  # linking a shared library.
+  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
+
+else
+  GXX=no
+  with_gnu_ld=no
+  wlarc=
+fi
+
+# PORTME: fill in a description of your system's C++ link characteristics
+AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+_LT_AC_TAGVAR(ld_shlibs, $1)=yes
+case $host_os in
+  aix3*)
+    # FIXME: insert proper C++ library support
+    _LT_AC_TAGVAR(ld_shlibs, $1)=no
+    ;;
+  aix[[4-9]]*)
+    if test "$host_cpu" = ia64; then
+      # On IA64, the linker does run time linking by default, so we don't
+      # have to do anything special.
+      aix_use_runtimelinking=no
+      exp_sym_flag='-Bexport'
+      no_entry_flag=""
+    else
+      aix_use_runtimelinking=no
+
+      # Test if we are trying to use run time linking or normal
+      # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+      # need to do runtime linking.
+      case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
+       for ld_flag in $LDFLAGS; do
+         case $ld_flag in
+         *-brtl*)
+           aix_use_runtimelinking=yes
+           break
+           ;;
+         esac
+       done
+       ;;
+      esac
+
+      exp_sym_flag='-bexport'
+      no_entry_flag='-bnoentry'
+    fi
+
+    # When large executables or shared objects are built, AIX ld can
+    # have problems creating the table of contents.  If linking a library
+    # or program results in "error TOC overflow" add -mminimal-toc to
+    # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+    # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+    _LT_AC_TAGVAR(archive_cmds, $1)=''
+    _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+    _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
+    _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+
+    if test "$GXX" = yes; then
+      case $host_os in aix4.[[012]]|aix4.[[012]].*)
+      # We only want to do this on AIX 4.2 and lower, the check
+      # below for broken collect2 doesn't work under 4.3+
+       collect2name=`${CC} -print-prog-name=collect2`
+       if test -f "$collect2name" && \
+          strings "$collect2name" | grep resolve_lib_name >/dev/null
+       then
+         # We have reworked collect2
+         :
+       else
+         # We have old collect2
+         _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
+         # It fails to find uninstalled libraries when the uninstalled
+         # path is not listed in the libpath.  Setting hardcode_minus_L
+         # to unsupported forces relinking
+         _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+         _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+         _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
+       fi
+       ;;
+      esac
+      shared_flag='-shared'
+      if test "$aix_use_runtimelinking" = yes; then
+       shared_flag="$shared_flag "'${wl}-G'
+      fi
+    else
+      # not using gcc
+      if test "$host_cpu" = ia64; then
+       # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+       # chokes on -Wl,-G. The following line is correct:
+       shared_flag='-G'
+      else
+       if test "$aix_use_runtimelinking" = yes; then
+         shared_flag='${wl}-G'
+       else
+         shared_flag='${wl}-bM:SRE'
+       fi
+      fi
+    fi
+
+    # It seems that -bexpall does not export symbols beginning with
+    # underscore (_), so it is better to generate a list of symbols to export.
+    _LT_AC_TAGVAR(always_export_symbols, $1)=yes
+    if test "$aix_use_runtimelinking" = yes; then
+      # Warning - without using the other runtime loading flags (-brtl),
+      # -berok will link without error, but may produce a broken library.
+      _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
+      # Determine the default libpath from the value encoded in an empty executable.
+      _LT_AC_SYS_LIBPATH_AIX
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+
+      _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+     else
+      if test "$host_cpu" = ia64; then
+       _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+       _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+       _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+      else
+       # Determine the default libpath from the value encoded in an empty executable.
+       _LT_AC_SYS_LIBPATH_AIX
+       _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+       # Warning - without using the other run time loading flags,
+       # -berok will link without error, but may produce a broken library.
+       _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+       _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+       # Exported symbols can be pulled into shared objects from archives
+       _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+       _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
+       # This is similar to how AIX traditionally builds its shared libraries.
+       _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+      fi
+    fi
+    ;;
+
+  beos*)
+    if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+      # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+      # support --undefined.  This deserves some investigation.  FIXME
+      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+    else
+      _LT_AC_TAGVAR(ld_shlibs, $1)=no
+    fi
+    ;;
+
+  chorus*)
+    case $cc_basename in
+      *)
+       # FIXME: insert proper C++ library support
+       _LT_AC_TAGVAR(ld_shlibs, $1)=no
+       ;;
+    esac
+    ;;
+
+  cygwin* | mingw* | pw32*)
+    # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+    # as there is no search path for DLLs.
+    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+    _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+    _LT_AC_TAGVAR(always_export_symbols, $1)=no
+    _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+
+    if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
+      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+      # If the export-symbols file already is a .def file (1st line
+      # is EXPORTS), use it as is; otherwise, prepend...
+      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+       cp $export_symbols $output_objdir/$soname.def;
+      else
+       echo EXPORTS > $output_objdir/$soname.def;
+       cat $export_symbols >> $output_objdir/$soname.def;
+      fi~
+      $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+    else
+      _LT_AC_TAGVAR(ld_shlibs, $1)=no
+    fi
+  ;;
+      darwin* | rhapsody*)
+      _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+      _LT_AC_TAGVAR(hardcode_direct, $1)=no
+      _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=''
+      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+      _LT_AC_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
+      if test "$GXX" = yes ; then
+      output_verbose_link_cmd='echo'
+      _LT_AC_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+      _LT_AC_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+      _LT_AC_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+      _LT_AC_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+      if test "$lt_cv_apple_cc_single_mod" != "yes"; then
+        _LT_AC_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
+        _LT_AC_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
+      fi
+      else
+      case $cc_basename in
+        xlc*)
+         output_verbose_link_cmd='echo'
+          _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
+          _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
+          _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          ;;
+       *)
+         _LT_AC_TAGVAR(ld_shlibs, $1)=no
+          ;;
+      esac
+      fi
+        ;;
+
+  dgux*)
+    case $cc_basename in
+      ec++*)
+       # FIXME: insert proper C++ library support
+       _LT_AC_TAGVAR(ld_shlibs, $1)=no
+       ;;
+      ghcx*)
+       # Green Hills C++ Compiler
+       # FIXME: insert proper C++ library support
+       _LT_AC_TAGVAR(ld_shlibs, $1)=no
+       ;;
+      *)
+       # FIXME: insert proper C++ library support
+       _LT_AC_TAGVAR(ld_shlibs, $1)=no
+       ;;
+    esac
+    ;;
+  freebsd[[12]]*)
+    # C++ shared libraries reported to be fairly broken before switch to ELF
+    _LT_AC_TAGVAR(ld_shlibs, $1)=no
+    ;;
+  freebsd-elf*)
+    _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+    ;;
+  freebsd* | dragonfly*)
+    # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
+    # conventions
+    _LT_AC_TAGVAR(ld_shlibs, $1)=yes
+    ;;
+  gnu*)
+    ;;
+  hpux9*)
+    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+    _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+    _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+    _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+                               # but as the default
+                               # location of the library.
+
+    case $cc_basename in
+    CC*)
+      # FIXME: insert proper C++ library support
+      _LT_AC_TAGVAR(ld_shlibs, $1)=no
+      ;;
+    aCC*)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      # Commands to make compiler produce verbose output that lists
+      # what "hidden" libraries, object files and flags are used when
+      # linking a shared library.
+      #
+      # There doesn't appear to be a way to prevent this compiler from
+      # explicitly linking system object files so we need to strip them
+      # from the output so that they don't get included in the library
+      # dependencies.
+      output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[[-]]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+      ;;
+    *)
+      if test "$GXX" = yes; then
+        _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      else
+        # FIXME: insert proper C++ library support
+        _LT_AC_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+    esac
+    ;;
+  hpux10*|hpux11*)
+    if test $with_gnu_ld = no; then
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
+      case $host_cpu in
+      hppa*64*|ia64*) ;;
+      *)
+       _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+        ;;
+      esac
+    fi
+    case $host_cpu in
+    hppa*64*|ia64*)
+      _LT_AC_TAGVAR(hardcode_direct, $1)=no
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+    *)
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+                                             # but as the default
+                                             # location of the library.
+      ;;
+    esac
+
+    case $cc_basename in
+      CC*)
+       # FIXME: insert proper C++ library support
+       _LT_AC_TAGVAR(ld_shlibs, $1)=no
+       ;;
+      aCC*)
+       case $host_cpu in
+       hppa*64*)
+         _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+         ;;
+       ia64*)
+         _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+         ;;
+       *)
+         _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+         ;;
+       esac
+       # Commands to make compiler produce verbose output that lists
+       # what "hidden" libraries, object files and flags are used when
+       # linking a shared library.
+       #
+       # There doesn't appear to be a way to prevent this compiler from
+       # explicitly linking system object files so we need to strip them
+       # from the output so that they don't get included in the library
+       # dependencies.
+       output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+       ;;
+      *)
+       if test "$GXX" = yes; then
+         if test $with_gnu_ld = no; then
+           case $host_cpu in
+           hppa*64*)
+             _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+             ;;
+           ia64*)
+             _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+             ;;
+           *)
+             _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+             ;;
+           esac
+         fi
+       else
+         # FIXME: insert proper C++ library support
+         _LT_AC_TAGVAR(ld_shlibs, $1)=no
+       fi
+       ;;
+    esac
+    ;;
+  interix[[3-9]]*)
+    _LT_AC_TAGVAR(hardcode_direct, $1)=no
+    _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+    # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+    # Instead, shared libraries are loaded at an image base (0x10000000 by
+    # default) and relocated if they conflict, which is a slow very memory
+    # consuming and fragmenting process.  To avoid this, we pick a random,
+    # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+    # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+    ;;
+  irix5* | irix6*)
+    case $cc_basename in
+      CC*)
+       # SGI C++
+       _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+
+       # Archives containing C++ object files must be created using
+       # "CC -ar", where "CC" is the IRIX C++ compiler.  This is
+       # necessary to make sure instantiated templates are included
+       # in the archive.
+       _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
+       ;;
+      *)
+       if test "$GXX" = yes; then
+         if test "$with_gnu_ld" = no; then
+           _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+         else
+           _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
+         fi
+       fi
+       _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+       ;;
+    esac
+    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+    _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+    ;;
+  linux* | k*bsd*-gnu)
+    case $cc_basename in
+      KCC*)
+       # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+       # KCC will only create a shared library if the output file
+       # ends with ".so" (or ".sl" for HP-UX), so rename the library
+       # to its proper name (with version) after linking.
+       _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+       _LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
+       # Commands to make compiler produce verbose output that lists
+       # what "hidden" libraries, object files and flags are used when
+       # linking a shared library.
+       #
+       # There doesn't appear to be a way to prevent this compiler from
+       # explicitly linking system object files so we need to strip them
+       # from the output so that they don't get included in the library
+       # dependencies.
+       output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+
+       _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir'
+       _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+
+       # Archives containing C++ object files must be created using
+       # "CC -Bstatic", where "CC" is the KAI C++ compiler.
+       _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
+       ;;
+      icpc*)
+       # Intel C++
+       with_gnu_ld=yes
+       # version 8.0 and above of icpc choke on multiply defined symbols
+       # if we add $predep_objects and $postdep_objects, however 7.1 and
+       # earlier do not add the objects themselves.
+       case `$CC -V 2>&1` in
+       *"Version 7."*)
+         _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+         _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+         ;;
+       *)  # Version 8.0 or newer
+         tmp_idyn=
+         case $host_cpu in
+           ia64*) tmp_idyn=' -i_dynamic';;
+         esac
+         _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+         _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+         ;;
+       esac
+       _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+       _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+       _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+       _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+       ;;
+      pgCC* | pgcpp*)
+        # Portland Group C++ compiler
+       _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+       _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+
+       _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
+       _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+       _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+        ;;
+      cxx*)
+       # Compaq C++
+       _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+       _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
+
+       runpath_var=LD_RUN_PATH
+       _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+       _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
+       # Commands to make compiler produce verbose output that lists
+       # what "hidden" libraries, object files and flags are used when
+       # linking a shared library.
+       #
+       # There doesn't appear to be a way to prevent this compiler from
+       # explicitly linking system object files so we need to strip them
+       # from the output so that they don't get included in the library
+       # dependencies.
+       output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+       ;;
+      *)
+       case `$CC -V 2>&1 | sed 5q` in
+       *Sun\ C*)
+         # Sun C++ 5.9
+         _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+         _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+         _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
+         _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+         _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+
+         # Not sure whether something based on
+         # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
+         # would be better.
+         output_verbose_link_cmd='echo'
+
+         # Archives containing C++ object files must be created using
+         # "CC -xar", where "CC" is the Sun C++ compiler.  This is
+         # necessary to make sure instantiated templates are included
+         # in the archive.
+         _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
+         ;;
+       esac
+       ;;
+    esac
+    ;;
+  lynxos*)
+    # FIXME: insert proper C++ library support
+    _LT_AC_TAGVAR(ld_shlibs, $1)=no
+    ;;
+  m88k*)
+    # FIXME: insert proper C++ library support
+    _LT_AC_TAGVAR(ld_shlibs, $1)=no
+    ;;
+  mvs*)
+    case $cc_basename in
+      cxx*)
+       # FIXME: insert proper C++ library support
+       _LT_AC_TAGVAR(ld_shlibs, $1)=no
+       ;;
+      *)
+       # FIXME: insert proper C++ library support
+       _LT_AC_TAGVAR(ld_shlibs, $1)=no
+       ;;
+    esac
+    ;;
+  netbsd*)
+    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable  -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
+      wlarc=
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+    fi
+    # Workaround some broken pre-1.5 toolchains
+    output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
+    ;;
+  openbsd2*)
+    # C++ shared libraries are fairly broken
+    _LT_AC_TAGVAR(ld_shlibs, $1)=no
+    ;;
+  openbsd*)
+    if test -f /usr/libexec/ld.so; then
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+      if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+       _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
+       _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+       _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+      fi
+      output_verbose_link_cmd='echo'
+    else
+      _LT_AC_TAGVAR(ld_shlibs, $1)=no
+    fi
+    ;;
+  osf3*)
+    case $cc_basename in
+      KCC*)
+       # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+       # KCC will only create a shared library if the output file
+       # ends with ".so" (or ".sl" for HP-UX), so rename the library
+       # to its proper name (with version) after linking.
+       _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+
+       _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+       _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
+       # Archives containing C++ object files must be created using
+       # "CC -Bstatic", where "CC" is the KAI C++ compiler.
+       _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
+
+       ;;
+      RCC*)
+       # Rational C++ 2.4.1
+       # FIXME: insert proper C++ library support
+       _LT_AC_TAGVAR(ld_shlibs, $1)=no
+       ;;
+      cxx*)
+       _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+       _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+
+       _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+       _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
+       # Commands to make compiler produce verbose output that lists
+       # what "hidden" libraries, object files and flags are used when
+       # linking a shared library.
+       #
+       # There doesn't appear to be a way to prevent this compiler from
+       # explicitly linking system object files so we need to strip them
+       # from the output so that they don't get included in the library
+       # dependencies.
+       output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+       ;;
+      *)
+       if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+         _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+         _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+
+         _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+         _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
+         # Commands to make compiler produce verbose output that lists
+         # what "hidden" libraries, object files and flags are used when
+         # linking a shared library.
+         output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
+
+       else
+         # FIXME: insert proper C++ library support
+         _LT_AC_TAGVAR(ld_shlibs, $1)=no
+       fi
+       ;;
+    esac
+    ;;
+  osf4* | osf5*)
+    case $cc_basename in
+      KCC*)
+       # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+       # KCC will only create a shared library if the output file
+       # ends with ".so" (or ".sl" for HP-UX), so rename the library
+       # to its proper name (with version) after linking.
+       _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+
+       _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+       _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
+       # Archives containing C++ object files must be created using
+       # the KAI C++ compiler.
+       _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs'
+       ;;
+      RCC*)
+       # Rational C++ 2.4.1
+       # FIXME: insert proper C++ library support
+       _LT_AC_TAGVAR(ld_shlibs, $1)=no
+       ;;
+      cxx*)
+       _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+       _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+       _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
+         echo "-hidden">> $lib.exp~
+         $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp  `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~
+         $rm $lib.exp'
+
+       _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+       _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
+       # Commands to make compiler produce verbose output that lists
+       # what "hidden" libraries, object files and flags are used when
+       # linking a shared library.
+       #
+       # There doesn't appear to be a way to prevent this compiler from
+       # explicitly linking system object files so we need to strip them
+       # from the output so that they don't get included in the library
+       # dependencies.
+       output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+       ;;
+      *)
+       if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+         _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+
+         _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+         _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
+         # Commands to make compiler produce verbose output that lists
+         # what "hidden" libraries, object files and flags are used when
+         # linking a shared library.
+         output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
+
+       else
+         # FIXME: insert proper C++ library support
+         _LT_AC_TAGVAR(ld_shlibs, $1)=no
+       fi
+       ;;
+    esac
+    ;;
+  psos*)
+    # FIXME: insert proper C++ library support
+    _LT_AC_TAGVAR(ld_shlibs, $1)=no
+    ;;
+  sunos4*)
+    case $cc_basename in
+      CC*)
+       # Sun C++ 4.x
+       # FIXME: insert proper C++ library support
+       _LT_AC_TAGVAR(ld_shlibs, $1)=no
+       ;;
+      lcc*)
+       # Lucid
+       # FIXME: insert proper C++ library support
+       _LT_AC_TAGVAR(ld_shlibs, $1)=no
+       ;;
+      *)
+       # FIXME: insert proper C++ library support
+       _LT_AC_TAGVAR(ld_shlibs, $1)=no
+       ;;
+    esac
+    ;;
+  solaris*)
+    case $cc_basename in
+      CC*)
+       # Sun C++ 4.2, 5.x and Centerline C++
+        _LT_AC_TAGVAR(archive_cmds_need_lc,$1)=yes
+       _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+       _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag}  -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+       _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+       $CC -G${allow_undefined_flag}  ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
+
+       _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+       _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+       case $host_os in
+         solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+         *)
+           # The compiler driver will combine and reorder linker options,
+           # but understands `-z linker_flag'.
+           # Supported since Solaris 2.6 (maybe 2.5.1?)
+           _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
+           ;;
+       esac
+       _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+
+       output_verbose_link_cmd='echo'
+
+       # Archives containing C++ object files must be created using
+       # "CC -xar", where "CC" is the Sun C++ compiler.  This is
+       # necessary to make sure instantiated templates are included
+       # in the archive.
+       _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
+       ;;
+      gcx*)
+       # Green Hills C++ Compiler
+       _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+
+       # The C++ compiler must be used to create the archive.
+       _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
+       ;;
+      *)
+       # GNU C++ compiler with Solaris linker
+       if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+         _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
+         if $CC --version | grep -v '^2\.7' > /dev/null; then
+           _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+           _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+               $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
+
+           # Commands to make compiler produce verbose output that lists
+           # what "hidden" libraries, object files and flags are used when
+           # linking a shared library.
+           output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
+         else
+           # g++ 2.7 appears to require `-G' NOT `-shared' on this
+           # platform.
+           _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+           _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+               $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
+
+           # Commands to make compiler produce verbose output that lists
+           # what "hidden" libraries, object files and flags are used when
+           # linking a shared library.
+           output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
+         fi
+
+         _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
+         case $host_os in
+         solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+         *)
+           _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+           ;;
+         esac
+       fi
+       ;;
+    esac
+    ;;
+  sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
+    _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+    _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+    _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+    runpath_var='LD_RUN_PATH'
+
+    case $cc_basename in
+      CC*)
+       _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+       _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+       ;;
+      *)
+       _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+       _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+       ;;
+    esac
+    ;;
+  sysv5* | sco3.2v5* | sco5v6*)
+    # Note: We can NOT use -z defs as we might desire, because we do not
+    # link with -lc, and that would cause any symbols used from libc to
+    # always be unresolved, which means just about no library would
+    # ever link correctly.  If we're not using GNU ld we use -z text
+    # though, which does catch some bad symbols but isn't as heavy-handed
+    # as -z defs.
+    # For security reasons, it is highly recommended that you always
+    # use absolute paths for naming shared libraries, and exclude the
+    # DT_RUNPATH tag from executables and libraries.  But doing so
+    # requires that you compile everything twice, which is a pain.
+    # So that behaviour is only enabled if SCOABSPATH is set to a
+    # non-empty value in the environment.  Most likely only useful for
+    # creating official distributions of packages.
+    # This is a hack until libtool officially supports absolute path
+    # names for shared libraries.
+    _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+    _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+    _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+    _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
+    _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
+    _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+    runpath_var='LD_RUN_PATH'
+
+    case $cc_basename in
+      CC*)
+       _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+       _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+       ;;
+      *)
+       _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+       _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+       ;;
+    esac
+    ;;
+  tandem*)
+    case $cc_basename in
+      NCC*)
+       # NonStop-UX NCC 3.20
+       # FIXME: insert proper C++ library support
+       _LT_AC_TAGVAR(ld_shlibs, $1)=no
+       ;;
+      *)
+       # FIXME: insert proper C++ library support
+       _LT_AC_TAGVAR(ld_shlibs, $1)=no
+       ;;
+    esac
+    ;;
+  vxworks*)
+    # FIXME: insert proper C++ library support
+    _LT_AC_TAGVAR(ld_shlibs, $1)=no
+    ;;
+  *)
+    # FIXME: insert proper C++ library support
+    _LT_AC_TAGVAR(ld_shlibs, $1)=no
+    ;;
+esac
+AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
+test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+
+_LT_AC_TAGVAR(GCC, $1)="$GXX"
+_LT_AC_TAGVAR(LD, $1)="$LD"
+
+AC_LIBTOOL_POSTDEP_PREDEP($1)
+AC_LIBTOOL_PROG_COMPILER_PIC($1)
+AC_LIBTOOL_PROG_CC_C_O($1)
+AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
+AC_LIBTOOL_PROG_LD_SHLIBS($1)
+AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
+AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
+
+AC_LIBTOOL_CONFIG($1)
+
+AC_LANG_POP
+CC=$lt_save_CC
+LDCXX=$LD
+LD=$lt_save_LD
+GCC=$lt_save_GCC
+with_gnu_ldcxx=$with_gnu_ld
+with_gnu_ld=$lt_save_with_gnu_ld
+lt_cv_path_LDCXX=$lt_cv_path_LD
+lt_cv_path_LD=$lt_save_path_LD
+lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
+lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
+])# AC_LIBTOOL_LANG_CXX_CONFIG
+
+# AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME])
+# ------------------------------------
+# Figure out "hidden" library dependencies from verbose
+# compiler output when linking a shared library.
+# Parse the compiler output and extract the necessary
+# objects, libraries and library flags.
+AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP],
+[AC_REQUIRE([LT_AC_PROG_SED])dnl
+dnl we can't use the lt_simple_compile_test_code here,
+dnl because it contains code intended for an executable,
+dnl not a library.  It's possible we should let each
+dnl tag define a new lt_????_link_test_code variable,
+dnl but it's only used here...
+ifelse([$1],[],[cat > conftest.$ac_ext <<EOF
+int a;
+void foo (void) { a = 0; }
+EOF
+],[$1],[CXX],[cat > conftest.$ac_ext <<EOF
+class Foo
+{
+public:
+  Foo (void) { a = 0; }
+private:
+  int a;
+};
+EOF
+],[$1],[F77],[cat > conftest.$ac_ext <<EOF
+      subroutine foo
+      implicit none
+      integer*4 a
+      a=0
+      return
+      end
+EOF
+],[$1],[GCJ],[cat > conftest.$ac_ext <<EOF
+public class foo {
+  private int a;
+  public void bar (void) {
+    a = 0;
+  }
+};
+EOF
+])
+dnl Parse the compiler output and extract the necessary
+dnl objects, libraries and library flags.
+if AC_TRY_EVAL(ac_compile); then
+  # Parse the compiler output and extract the necessary
+  # objects, libraries and library flags.
+
+  # Sentinel used to keep track of whether or not we are before
+  # the conftest object file.
+  pre_test_object_deps_done=no
+
+  # The `*' in the case matches for architectures that use `case' in
+  # $output_verbose_cmd can trigger glob expansion during the loop
+  # eval without this substitution.
+  output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"`
+
+  for p in `eval $output_verbose_link_cmd`; do
+    case $p in
+
+    -L* | -R* | -l*)
+       # Some compilers place space between "-{L,R}" and the path.
+       # Remove the space.
+       if test $p = "-L" \
+         || test $p = "-R"; then
+        prev=$p
+        continue
+       else
+        prev=
+       fi
+
+       if test "$pre_test_object_deps_done" = no; then
+        case $p in
+        -L* | -R*)
+          # Internal compiler library paths should come after those
+          # provided the user.  The postdeps already come after the
+          # user supplied libs so there is no need to process them.
+          if test -z "$_LT_AC_TAGVAR(compiler_lib_search_path, $1)"; then
+            _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
+          else
+            _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${_LT_AC_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
+          fi
+          ;;
+        # The "-l" case would never come before the object being
+        # linked, so don't bother handling this case.
+        esac
+       else
+        if test -z "$_LT_AC_TAGVAR(postdeps, $1)"; then
+          _LT_AC_TAGVAR(postdeps, $1)="${prev}${p}"
+        else
+          _LT_AC_TAGVAR(postdeps, $1)="${_LT_AC_TAGVAR(postdeps, $1)} ${prev}${p}"
+        fi
+       fi
+       ;;
+
+    *.$objext)
+       # This assumes that the test object file only shows up
+       # once in the compiler output.
+       if test "$p" = "conftest.$objext"; then
+        pre_test_object_deps_done=yes
+        continue
+       fi
+
+       if test "$pre_test_object_deps_done" = no; then
+        if test -z "$_LT_AC_TAGVAR(predep_objects, $1)"; then
+          _LT_AC_TAGVAR(predep_objects, $1)="$p"
+        else
+          _LT_AC_TAGVAR(predep_objects, $1)="$_LT_AC_TAGVAR(predep_objects, $1) $p"
+        fi
+       else
+        if test -z "$_LT_AC_TAGVAR(postdep_objects, $1)"; then
+          _LT_AC_TAGVAR(postdep_objects, $1)="$p"
+        else
+          _LT_AC_TAGVAR(postdep_objects, $1)="$_LT_AC_TAGVAR(postdep_objects, $1) $p"
+        fi
+       fi
+       ;;
+
+    *) ;; # Ignore the rest.
+
+    esac
+  done
+
+  # Clean up.
+  rm -f a.out a.exe
+else
+  echo "libtool.m4: error: problem compiling $1 test program"
+fi
+
+$rm -f confest.$objext
+
+_LT_AC_TAGVAR(compiler_lib_search_dirs, $1)=
+if test -n "$_LT_AC_TAGVAR(compiler_lib_search_path, $1)"; then
+  _LT_AC_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_AC_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
+fi
+
+# PORTME: override above test on systems where it is broken
+ifelse([$1],[CXX],
+[case $host_os in
+interix[[3-9]]*)
+  # Interix 3.5 installs completely hosed .la files for C++, so rather than
+  # hack all around it, let's just trust "g++" to DTRT.
+  _LT_AC_TAGVAR(predep_objects,$1)=
+  _LT_AC_TAGVAR(postdep_objects,$1)=
+  _LT_AC_TAGVAR(postdeps,$1)=
+  ;;
+
+linux*)
+  case `$CC -V 2>&1 | sed 5q` in
+  *Sun\ C*)
+    # Sun C++ 5.9
+    #
+    # The more standards-conforming stlport4 library is
+    # incompatible with the Cstd library. Avoid specifying
+    # it if it's in CXXFLAGS. Ignore libCrun as
+    # -library=stlport4 depends on it.
+    case " $CXX $CXXFLAGS " in
+    *" -library=stlport4 "*)
+      solaris_use_stlport4=yes
+      ;;
+    esac
+    if test "$solaris_use_stlport4" != yes; then
+      _LT_AC_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
+    fi
+    ;;
+  esac
+  ;;
+
+solaris*)
+  case $cc_basename in
+  CC*)
+    # The more standards-conforming stlport4 library is
+    # incompatible with the Cstd library. Avoid specifying
+    # it if it's in CXXFLAGS. Ignore libCrun as
+    # -library=stlport4 depends on it.
+    case " $CXX $CXXFLAGS " in
+    *" -library=stlport4 "*)
+      solaris_use_stlport4=yes
+      ;;
+    esac
+
+    # Adding this requires a known-good setup of shared libraries for
+    # Sun compiler versions before 5.6, else PIC objects from an old
+    # archive will be linked into the output, leading to subtle bugs.
+    if test "$solaris_use_stlport4" != yes; then
+      _LT_AC_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
+    fi
+    ;;
+  esac
+  ;;
+esac
+])
+case " $_LT_AC_TAGVAR(postdeps, $1) " in
+*" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;;
+esac
+])# AC_LIBTOOL_POSTDEP_PREDEP
+
+# AC_LIBTOOL_LANG_F77_CONFIG
+# --------------------------
+# Ensure that the configuration vars for the C compiler are
+# suitably defined.  Those variables are subsequently used by
+# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
+AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG], [_LT_AC_LANG_F77_CONFIG(F77)])
+AC_DEFUN([_LT_AC_LANG_F77_CONFIG],
+[AC_REQUIRE([AC_PROG_F77])
+AC_LANG_PUSH(Fortran 77)
+
+_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_AC_TAGVAR(allow_undefined_flag, $1)=
+_LT_AC_TAGVAR(always_export_symbols, $1)=no
+_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
+_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_AC_TAGVAR(hardcode_direct, $1)=no
+_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
+_LT_AC_TAGVAR(hardcode_automatic, $1)=no
+_LT_AC_TAGVAR(module_cmds, $1)=
+_LT_AC_TAGVAR(module_expsym_cmds, $1)=
+_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_AC_TAGVAR(no_undefined_flag, $1)=
+_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for f77 test sources.
+ac_ext=f
+
+# Object file extension for compiled f77 test sources.
+objext=o
+_LT_AC_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="\
+      subroutine t
+      return
+      end
+"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code="\
+      program t
+      end
+"
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_AC_SYS_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+CC=${F77-"f77"}
+compiler=$CC
+_LT_AC_TAGVAR(compiler, $1)=$CC
+_LT_CC_BASENAME([$compiler])
+
+AC_MSG_CHECKING([if libtool supports shared libraries])
+AC_MSG_RESULT([$can_build_shared])
+
+AC_MSG_CHECKING([whether to build shared libraries])
+test "$can_build_shared" = "no" && enable_shared=no
+
+# On AIX, shared libraries and static libraries use the same namespace, and
+# are all built from PIC.
+case $host_os in
+aix3*)
+  test "$enable_shared" = yes && enable_static=no
+  if test -n "$RANLIB"; then
+    archive_cmds="$archive_cmds~\$RANLIB \$lib"
+    postinstall_cmds='$RANLIB $lib'
+  fi
+  ;;
+aix[[4-9]]*)
+  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+    test "$enable_shared" = yes && enable_static=no
+  fi
+  ;;
+esac
+AC_MSG_RESULT([$enable_shared])
+
+AC_MSG_CHECKING([whether to build static libraries])
+# Make sure either enable_shared or enable_static is yes.
+test "$enable_shared" = yes || enable_static=yes
+AC_MSG_RESULT([$enable_static])
+
+_LT_AC_TAGVAR(GCC, $1)="$G77"
+_LT_AC_TAGVAR(LD, $1)="$LD"
+
+AC_LIBTOOL_PROG_COMPILER_PIC($1)
+AC_LIBTOOL_PROG_CC_C_O($1)
+AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
+AC_LIBTOOL_PROG_LD_SHLIBS($1)
+AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
+AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
+
+AC_LIBTOOL_CONFIG($1)
+
+AC_LANG_POP
+CC="$lt_save_CC"
+])# AC_LIBTOOL_LANG_F77_CONFIG
+
+
+# AC_LIBTOOL_LANG_GCJ_CONFIG
+# --------------------------
+# Ensure that the configuration vars for the C compiler are
+# suitably defined.  Those variables are subsequently used by
+# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
+AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG], [_LT_AC_LANG_GCJ_CONFIG(GCJ)])
+AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG],
+[AC_LANG_SAVE
+
+# Source file extension for Java test sources.
+ac_ext=java
+
+# Object file extension for compiled Java test sources.
+objext=o
+_LT_AC_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="class foo {}"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }'
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_AC_SYS_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+CC=${GCJ-"gcj"}
+compiler=$CC
+_LT_AC_TAGVAR(compiler, $1)=$CC
+_LT_CC_BASENAME([$compiler])
+
+# GCJ did not exist at the time GCC didn't implicitly link libc in.
+_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+
+_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+
+AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
+AC_LIBTOOL_PROG_COMPILER_PIC($1)
+AC_LIBTOOL_PROG_CC_C_O($1)
+AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
+AC_LIBTOOL_PROG_LD_SHLIBS($1)
+AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
+AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
+
+AC_LIBTOOL_CONFIG($1)
+
+AC_LANG_RESTORE
+CC="$lt_save_CC"
+])# AC_LIBTOOL_LANG_GCJ_CONFIG
+
+
+# AC_LIBTOOL_LANG_RC_CONFIG
+# -------------------------
+# Ensure that the configuration vars for the Windows resource compiler are
+# suitably defined.  Those variables are subsequently used by
+# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
+AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG], [_LT_AC_LANG_RC_CONFIG(RC)])
+AC_DEFUN([_LT_AC_LANG_RC_CONFIG],
+[AC_LANG_SAVE
+
+# Source file extension for RC test sources.
+ac_ext=rc
+
+# Object file extension for compiled RC test sources.
+objext=o
+_LT_AC_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
+
+# Code to be used in simple link tests
+lt_simple_link_test_code="$lt_simple_compile_test_code"
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_AC_SYS_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+CC=${RC-"windres"}
+compiler=$CC
+_LT_AC_TAGVAR(compiler, $1)=$CC
+_LT_CC_BASENAME([$compiler])
+_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+
+AC_LIBTOOL_CONFIG($1)
+
+AC_LANG_RESTORE
+CC="$lt_save_CC"
+])# AC_LIBTOOL_LANG_RC_CONFIG
+
+
+# AC_LIBTOOL_CONFIG([TAGNAME])
+# ----------------------------
+# If TAGNAME is not passed, then create an initial libtool script
+# with a default configuration from the untagged config vars.  Otherwise
+# add code to config.status for appending the configuration named by
+# TAGNAME from the matching tagged config vars.
+AC_DEFUN([AC_LIBTOOL_CONFIG],
+[# The else clause should only fire when bootstrapping the
+# libtool distribution, otherwise you forgot to ship ltmain.sh
+# with your package, and you will get complaints that there are
+# no rules to generate ltmain.sh.
+if test -f "$ltmain"; then
+  # See if we are running on zsh, and set the options which allow our commands through
+  # without removal of \ escapes.
+  if test -n "${ZSH_VERSION+set}" ; then
+    setopt NO_GLOB_SUBST
+  fi
+  # Now quote all the things that may contain metacharacters while being
+  # careful not to overquote the AC_SUBSTed values.  We take copies of the
+  # variables and quote the copies for generation of the libtool script.
+  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
+    SED SHELL STRIP \
+    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
+    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
+    deplibs_check_method reload_flag reload_cmds need_locks \
+    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
+    lt_cv_sys_global_symbol_to_c_name_address \
+    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
+    old_postinstall_cmds old_postuninstall_cmds \
+    _LT_AC_TAGVAR(compiler, $1) \
+    _LT_AC_TAGVAR(CC, $1) \
+    _LT_AC_TAGVAR(LD, $1) \
+    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1) \
+    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1) \
+    _LT_AC_TAGVAR(lt_prog_compiler_static, $1) \
+    _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) \
+    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1) \
+    _LT_AC_TAGVAR(thread_safe_flag_spec, $1) \
+    _LT_AC_TAGVAR(whole_archive_flag_spec, $1) \
+    _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) \
+    _LT_AC_TAGVAR(old_archive_cmds, $1) \
+    _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) \
+    _LT_AC_TAGVAR(predep_objects, $1) \
+    _LT_AC_TAGVAR(postdep_objects, $1) \
+    _LT_AC_TAGVAR(predeps, $1) \
+    _LT_AC_TAGVAR(postdeps, $1) \
+    _LT_AC_TAGVAR(compiler_lib_search_path, $1) \
+    _LT_AC_TAGVAR(compiler_lib_search_dirs, $1) \
+    _LT_AC_TAGVAR(archive_cmds, $1) \
+    _LT_AC_TAGVAR(archive_expsym_cmds, $1) \
+    _LT_AC_TAGVAR(postinstall_cmds, $1) \
+    _LT_AC_TAGVAR(postuninstall_cmds, $1) \
+    _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) \
+    _LT_AC_TAGVAR(allow_undefined_flag, $1) \
+    _LT_AC_TAGVAR(no_undefined_flag, $1) \
+    _LT_AC_TAGVAR(export_symbols_cmds, $1) \
+    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) \
+    _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) \
+    _LT_AC_TAGVAR(hardcode_libdir_separator, $1) \
+    _LT_AC_TAGVAR(hardcode_automatic, $1) \
+    _LT_AC_TAGVAR(module_cmds, $1) \
+    _LT_AC_TAGVAR(module_expsym_cmds, $1) \
+    _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) \
+    _LT_AC_TAGVAR(fix_srcfile_path, $1) \
+    _LT_AC_TAGVAR(exclude_expsyms, $1) \
+    _LT_AC_TAGVAR(include_expsyms, $1); do
+
+    case $var in
+    _LT_AC_TAGVAR(old_archive_cmds, $1) | \
+    _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) | \
+    _LT_AC_TAGVAR(archive_cmds, $1) | \
+    _LT_AC_TAGVAR(archive_expsym_cmds, $1) | \
+    _LT_AC_TAGVAR(module_cmds, $1) | \
+    _LT_AC_TAGVAR(module_expsym_cmds, $1) | \
+    _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) | \
+    _LT_AC_TAGVAR(export_symbols_cmds, $1) | \
+    extract_expsyms_cmds | reload_cmds | finish_cmds | \
+    postinstall_cmds | postuninstall_cmds | \
+    old_postinstall_cmds | old_postuninstall_cmds | \
+    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
+      # Double-quote double-evaled strings.
+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
+      ;;
+    *)
+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
+      ;;
+    esac
+  done
+
+  case $lt_echo in
+  *'\[$]0 --fallback-echo"')
+    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\[$]0 --fallback-echo"[$]/[$]0 --fallback-echo"/'`
+    ;;
+  esac
+
+ifelse([$1], [],
+  [cfgfile="${ofile}T"
+  trap "$rm \"$cfgfile\"; exit 1" 1 2 15
+  $rm -f "$cfgfile"
+  AC_MSG_NOTICE([creating $ofile])],
+  [cfgfile="$ofile"])
+
+  cat <<__EOF__ >> "$cfgfile"
+ifelse([$1], [],
+[#! $SHELL
+
+# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+#
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
+# Free Software Foundation, Inc.
+#
+# This file is part of GNU Libtool:
+# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# A sed program that does not truncate output.
+SED=$lt_SED
+
+# Sed that helps us avoid accidentally triggering echo(1) options like -n.
+Xsed="$SED -e 1s/^X//"
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+# The names of the tagged configurations supported by this script.
+available_tags=
+
+# ### BEGIN LIBTOOL CONFIG],
+[# ### BEGIN LIBTOOL TAG CONFIG: $tagname])
+
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
+
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
+
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)
+
+# Whether or not to disallow shared libs when runtime libs are static
+allow_libtool_libs_with_static_runtimes=$_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)
+
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
+
+# The host system.
+host_alias=$host_alias
+host=$host
+host_os=$host_os
+
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
+
+# An echo program that does not interpret backslashes.
+echo=$lt_echo
+
+# The archiver.
+AR=$lt_AR
+AR_FLAGS=$lt_AR_FLAGS
+
+# A C compiler.
+LTCC=$lt_LTCC
+
+# LTCC compiler flags.
+LTCFLAGS=$lt_LTCFLAGS
+
+# A language-specific compiler.
+CC=$lt_[]_LT_AC_TAGVAR(compiler, $1)
+
+# Is the compiler the GNU C compiler?
+with_gcc=$_LT_AC_TAGVAR(GCC, $1)
+
+# An ERE matcher.
+EGREP=$lt_EGREP
+
+# The linker used to build libraries.
+LD=$lt_[]_LT_AC_TAGVAR(LD, $1)
+
+# Whether we need hard or soft links.
+LN_S=$lt_LN_S
+
+# A BSD-compatible nm program.
+NM=$lt_NM
+
+# A symbol stripping program
+STRIP=$lt_STRIP
+
+# Used to examine libraries when file_magic_cmd begins "file"
+MAGIC_CMD=$MAGIC_CMD
+
+# Used on cygwin: DLL creation program.
+DLLTOOL="$DLLTOOL"
+
+# Used on cygwin: object dumper.
+OBJDUMP="$OBJDUMP"
+
+# Used on cygwin: assembler.
+AS="$AS"
+
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
+
+# How to pass a linker flag through the compiler.
+wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
+
+# Object file suffix (normally "o").
+objext="$ac_objext"
+
+# Old archive suffix (normally "a").
+libext="$libext"
+
+# Shared library suffix (normally ".so").
+shrext_cmds='$shrext_cmds'
+
+# Executable file suffix (normally "").
+exeext="$exeext"
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
+pic_mode=$pic_mode
+
+# What is the maximum length of a command?
+max_cmd_len=$lt_cv_sys_max_cmd_len
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)
+
+# Must we lock files when doing compilation?
+need_locks=$lt_need_locks
+
+# Do we need the lib prefix for modules?
+need_lib_prefix=$need_lib_prefix
+
+# Do we need a version for libraries?
+need_version=$need_version
+
+# Whether dlopen is supported.
+dlopen_support=$enable_dlopen
+
+# Whether dlopen of programs is supported.
+dlopen_self=$enable_dlopen_self
+
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=$enable_dlopen_self_static
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1)
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1)
+
+# Compiler flag to generate thread-safe objects.
+thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1)
+
+# Library versioning type.
+version_type=$version_type
+
+# Format of library name prefix.
+libname_spec=$lt_libname_spec
+
+# List of archive names.  First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME.
+library_names_spec=$lt_library_names_spec
+
+# The coded name of the library, if different from the real name.
+soname_spec=$lt_soname_spec
+
+# Commands used to build and install an old-style archive.
+RANLIB=$lt_RANLIB
+old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1)
+old_postinstall_cmds=$lt_old_postinstall_cmds
+old_postuninstall_cmds=$lt_old_postuninstall_cmds
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1)
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)
+
+# Commands used to build and install a shared archive.
+archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1)
+archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1)
+postinstall_cmds=$lt_postinstall_cmds
+postuninstall_cmds=$lt_postuninstall_cmds
+
+# Commands used to build a loadable module (assumed same as above if empty)
+module_cmds=$lt_[]_LT_AC_TAGVAR(module_cmds, $1)
+module_expsym_cmds=$lt_[]_LT_AC_TAGVAR(module_expsym_cmds, $1)
+
+# Commands to strip libraries.
+old_striplib=$lt_old_striplib
+striplib=$lt_striplib
+
+# Dependencies to place before the objects being linked to create a
+# shared library.
+predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1)
+
+# Dependencies to place after the objects being linked to create a
+# shared library.
+postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1)
+
+# Dependencies to place before the objects being linked to create a
+# shared library.
+predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1)
+
+# Dependencies to place after the objects being linked to create a
+# shared library.
+postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1)
+
+# The directories searched by this compiler when creating a shared
+# library
+compiler_lib_search_dirs=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_dirs, $1)
+
+# The library search path used internally by the compiler when linking
+# a shared library.
+compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1)
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$lt_deplibs_check_method
+
+# Command to use when deplibs_check_method == file_magic.
+file_magic_cmd=$lt_file_magic_cmd
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1)
+
+# Flag that forces no undefined symbols.
+no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1)
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=$lt_finish_cmds
+
+# Same as above, but a single script fragment to be evaled but not shown.
+finish_eval=$lt_finish_eval
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
+
+# Transform the output of nm in a proper C declaration
+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
+
+# Transform the output of nm in a C name address pair
+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
+
+# This is the shared library runtime path variable.
+runpath_var=$runpath_var
+
+# This is the shared library path variable.
+shlibpath_var=$shlibpath_var
+
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1)
+
+# Whether we should hardcode library paths into libraries.
+hardcode_into_libs=$hardcode_into_libs
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)
+
+# If ld is used when linking, flag to hardcode \$libdir into
+# a binary during linking. This must work even if \$libdir does
+# not exist.
+hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)
+
+# Whether we need a single -rpath flag with a separated argument.
+hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1)
+
+# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
+# resulting binary.
+hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1)
+
+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
+# resulting binary.
+hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1)
+
+# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
+# the resulting binary.
+hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)
+
+# Set to yes if building a shared library automatically hardcodes DIR into the library
+# and all subsequent libraries and executables linked against it.
+hardcode_automatic=$_LT_AC_TAGVAR(hardcode_automatic, $1)
+
+# Variables whose values should be saved in libtool wrapper scripts and
+# restored at relink time.
+variables_saved_for_relink="$variables_saved_for_relink"
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1)
+
+# Compile-time system search path for libraries
+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
+
+# Run-time system search path for libraries
+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+
+# Fix the shell variable \$srcfile for the compiler.
+fix_srcfile_path=$lt_fix_srcfile_path
+
+# Set to yes if exported symbols are required.
+always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1)
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1)
+
+# The commands to extract the exported symbol list from a shared archive.
+extract_expsyms_cmds=$lt_extract_expsyms_cmds
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1)
+
+# Symbols that must always be exported.
+include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1)
+
+ifelse([$1],[],
+[# ### END LIBTOOL CONFIG],
+[# ### END LIBTOOL TAG CONFIG: $tagname])
+
+__EOF__
+
+ifelse([$1],[], [
+  case $host_os in
+  aix3*)
+    cat <<\EOF >> "$cfgfile"
+
+# AIX sometimes has problems with the GCC collect2 program.  For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+  COLLECT_NAMES=
+  export COLLECT_NAMES
+fi
+EOF
+    ;;
+  esac
+
+  # We use sed instead of cat because bash on DJGPP gets confused if
+  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
+  # text mode, it properly converts lines to CR/LF.  This bash problem
+  # is reportedly fixed, but why not run on old versions too?
+  sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1)
+
+  mv -f "$cfgfile" "$ofile" || \
+    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+  chmod +x "$ofile"
+])
+else
+  # If there is no Makefile yet, we rely on a make rule to execute
+  # `config.status --recheck' to rerun these tests and create the
+  # libtool script then.
+  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
+  if test -f "$ltmain_in"; then
+    test -f Makefile && make "$ltmain"
+  fi
+fi
+])# AC_LIBTOOL_CONFIG
+
+
+# AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME])
+# -------------------------------------------
+AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI],
+[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
+
+_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
+
+if test "$GCC" = yes; then
+  _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
+
+  AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
+    lt_cv_prog_compiler_rtti_exceptions,
+    [-fno-rtti -fno-exceptions], [],
+    [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
+fi
+])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI
+
+
+# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
+# ---------------------------------
+AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE],
+[AC_REQUIRE([AC_CANONICAL_HOST])
+AC_REQUIRE([LT_AC_PROG_SED])
+AC_REQUIRE([AC_PROG_NM])
+AC_REQUIRE([AC_OBJEXT])
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+AC_MSG_CHECKING([command to parse $NM output from $compiler object])
+AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
+[
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[[BCDEGRST]]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
+
+# Transform an extracted symbol line into a proper C declaration
+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
+
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
+
+# Define system-specific variables.
+case $host_os in
+aix*)
+  symcode='[[BCDT]]'
+  ;;
+cygwin* | mingw* | pw32*)
+  symcode='[[ABCDGISTW]]'
+  ;;
+hpux*) # Its linker distinguishes data from code symbols
+  if test "$host_cpu" = ia64; then
+    symcode='[[ABCDEGRST]]'
+  fi
+  lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+  lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
+  ;;
+linux* | k*bsd*-gnu)
+  if test "$host_cpu" = ia64; then
+    symcode='[[ABCDGIRSTW]]'
+    lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+    lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
+  fi
+  ;;
+irix* | nonstopux*)
+  symcode='[[BCDEGRST]]'
+  ;;
+osf*)
+  symcode='[[BCDEGQRST]]'
+  ;;
+solaris*)
+  symcode='[[BDRT]]'
+  ;;
+sco3.2v5*)
+  symcode='[[DT]]'
+  ;;
+sysv4.2uw2*)
+  symcode='[[DT]]'
+  ;;
+sysv5* | sco5v6* | unixware* | OpenUNIX*)
+  symcode='[[ABDT]]'
+  ;;
+sysv4)
+  symcode='[[DFNSTU]]'
+  ;;
+esac
+
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $build_os in
+mingw*)
+  opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+  ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+  symcode='[[ABCDGIRSTW]]' ;;
+esac
+
+# Try without a prefix undercore, then with it.
+for ac_symprfx in "" "_"; do
+
+  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+  symxfrm="\\1 $ac_symprfx\\2 \\2"
+
+  # Write the raw and C identifiers.
+  lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[     ]]\($symcode$symcode*\)[[       ]][[    ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+
+  # Check to see that the pipe works correctly.
+  pipe_works=no
+
+  rm -f conftest*
+  cat > conftest.$ac_ext <<EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+EOF
+
+  if AC_TRY_EVAL(ac_compile); then
+    # Now try to grab the symbols.
+    nlist=conftest.nm
+    if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
+      # Try sorting and uniquifying the output.
+      if sort "$nlist" | uniq > "$nlist"T; then
+       mv -f "$nlist"T "$nlist"
+      else
+       rm -f "$nlist"T
+      fi
+
+      # Make sure that we snagged all the symbols we need.
+      if grep ' nm_test_var$' "$nlist" >/dev/null; then
+       if grep ' nm_test_func$' "$nlist" >/dev/null; then
+         cat <<EOF > conftest.$ac_ext
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+EOF
+         # Now generate the symbol file.
+         eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext'
+
+         cat <<EOF >> conftest.$ac_ext
+#if defined (__STDC__) && __STDC__
+# define lt_ptr_t void *
+#else
+# define lt_ptr_t char *
+# define const
+#endif
+
+/* The mapping between symbol names and symbols. */
+const struct {
+  const char *name;
+  lt_ptr_t address;
+}
+lt_preloaded_symbols[[]] =
+{
+EOF
+         $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext
+         cat <<\EOF >> conftest.$ac_ext
+  {0, (lt_ptr_t) 0}
+};
+
+#ifdef __cplusplus
+}
+#endif
+EOF
+         # Now try linking the two files.
+         mv conftest.$ac_objext conftstm.$ac_objext
+         lt_save_LIBS="$LIBS"
+         lt_save_CFLAGS="$CFLAGS"
+         LIBS="conftstm.$ac_objext"
+         CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
+         if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
+           pipe_works=yes
+         fi
+         LIBS="$lt_save_LIBS"
+         CFLAGS="$lt_save_CFLAGS"
+       else
+         echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
+       fi
+      else
+       echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
+      fi
+    else
+      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
+    fi
+  else
+    echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
+    cat conftest.$ac_ext >&5
+  fi
+  rm -rf conftest* conftst*
+
+  # Do not use the global_symbol_pipe unless it works.
+  if test "$pipe_works" = yes; then
+    break
+  else
+    lt_cv_sys_global_symbol_pipe=
+  fi
+done
+])
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+  lt_cv_sys_global_symbol_to_cdecl=
+fi
+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+  AC_MSG_RESULT(failed)
+else
+  AC_MSG_RESULT(ok)
+fi
+]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
+
+
+# AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME])
+# ---------------------------------------
+AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC],
+[_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)=
+_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
+_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=
+
+AC_MSG_CHECKING([for $compiler option to produce PIC])
+ ifelse([$1],[CXX],[
+  # C++ specific cases for pic, static, wl, etc.
+  if test "$GXX" = yes; then
+    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
+
+    case $host_os in
+    aix*)
+      # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+       # AIX 5 now supports IA64 processor
+       _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      fi
+      ;;
+    amigaos*)
+      # FIXME: we need at least 68020 code to build shared libraries, but
+      # adding the `-m68020' flag to GCC prevents building anything better,
+      # like `-m68040'.
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+      ;;
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+    mingw* | cygwin* | os2* | pw32*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
+      # (--disable-auto-import) libraries
+      m4_if([$1], [GCJ], [],
+       [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+      ;;
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+      ;;
+    *djgpp*)
+      # DJGPP does not support shared libraries at all
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
+      ;;
+    interix[[3-9]]*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+    sysv4*MP*)
+      if test -d /usr/nec; then
+       _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
+      fi
+      ;;
+    hpux*)
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case $host_cpu in
+      hppa*64*|ia64*)
+       ;;
+      *)
+       _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+       ;;
+      esac
+      ;;
+    *)
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+      ;;
+    esac
+  else
+    case $host_os in
+      aix[[4-9]]*)
+       # All AIX code is PIC.
+       if test "$host_cpu" = ia64; then
+         # AIX 5 now supports IA64 processor
+         _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+       else
+         _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
+       fi
+       ;;
+      chorus*)
+       case $cc_basename in
+       cxch68*)
+         # Green Hills C++ Compiler
+         # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
+         ;;
+       esac
+       ;;
+       darwin*)
+         # PIC is the default on this platform
+         # Common symbols not allowed in MH_DYLIB files
+         case $cc_basename in
+           xlc*)
+           _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon'
+           _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+           ;;
+         esac
+       ;;
+      dgux*)
+       case $cc_basename in
+         ec++*)
+           _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+           ;;
+         ghcx*)
+           # Green Hills C++ Compiler
+           _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+           ;;
+         *)
+           ;;
+       esac
+       ;;
+      freebsd* | dragonfly*)
+       # FreeBSD uses GNU C++
+       ;;
+      hpux9* | hpux10* | hpux11*)
+       case $cc_basename in
+         CC*)
+           _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+           _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+           if test "$host_cpu" != ia64; then
+             _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+           fi
+           ;;
+         aCC*)
+           _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+           _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+           case $host_cpu in
+           hppa*64*|ia64*)
+             # +Z the default
+             ;;
+           *)
+             _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+             ;;
+           esac
+           ;;
+         *)
+           ;;
+       esac
+       ;;
+      interix*)
+       # This is c89, which is MS Visual C++ (no shared libs)
+       # Anyone wants to do a port?
+       ;;
+      irix5* | irix6* | nonstopux*)
+       case $cc_basename in
+         CC*)
+           _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+           _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+           # CC pic flag -KPIC is the default.
+           ;;
+         *)
+           ;;
+       esac
+       ;;
+      linux* | k*bsd*-gnu)
+       case $cc_basename in
+         KCC*)
+           # KAI C++ Compiler
+           _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
+           _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+           ;;
+         icpc* | ecpc*)
+           # Intel C++
+           _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+           _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+           _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
+           ;;
+         pgCC* | pgcpp*)
+           # Portland Group C++ compiler.
+           _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+           _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+           _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+           ;;
+         cxx*)
+           # Compaq C++
+           # Make sure the PIC flag is empty.  It appears that all Alpha
+           # Linux and Compaq Tru64 Unix objects are PIC.
+           _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
+           _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+           ;;
+         *)
+           case `$CC -V 2>&1 | sed 5q` in
+           *Sun\ C*)
+             # Sun C++ 5.9
+             _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+             _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+             _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+             ;;
+           esac
+           ;;
+       esac
+       ;;
+      lynxos*)
+       ;;
+      m88k*)
+       ;;
+      mvs*)
+       case $cc_basename in
+         cxx*)
+           _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
+           ;;
+         *)
+           ;;
+       esac
+       ;;
+      netbsd*)
+       ;;
+      osf3* | osf4* | osf5*)
+       case $cc_basename in
+         KCC*)
+           _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
+           ;;
+         RCC*)
+           # Rational C++ 2.4.1
+           _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+           ;;
+         cxx*)
+           # Digital/Compaq C++
+           _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+           # Make sure the PIC flag is empty.  It appears that all Alpha
+           # Linux and Compaq Tru64 Unix objects are PIC.
+           _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
+           _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+           ;;
+         *)
+           ;;
+       esac
+       ;;
+      psos*)
+       ;;
+      solaris*)
+       case $cc_basename in
+         CC*)
+           # Sun C++ 4.2, 5.x and Centerline C++
+           _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+           _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+           _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+           ;;
+         gcx*)
+           # Green Hills C++ Compiler
+           _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+           ;;
+         *)
+           ;;
+       esac
+       ;;
+      sunos4*)
+       case $cc_basename in
+         CC*)
+           # Sun C++ 4.x
+           _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+           _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+           ;;
+         lcc*)
+           # Lucid
+           _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+           ;;
+         *)
+           ;;
+       esac
+       ;;
+      tandem*)
+       case $cc_basename in
+         NCC*)
+           # NonStop-UX NCC 3.20
+           _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+           ;;
+         *)
+           ;;
+       esac
+       ;;
+      sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+       case $cc_basename in
+         CC*)
+           _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+           _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+           _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+           ;;
+       esac
+       ;;
+      vxworks*)
+       ;;
+      *)
+       _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+       ;;
+    esac
+  fi
+],
+[
+  if test "$GCC" = yes; then
+    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
+
+    case $host_os in
+      aix*)
+      # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+       # AIX 5 now supports IA64 processor
+       _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      fi
+      ;;
+
+    amigaos*)
+      # FIXME: we need at least 68020 code to build shared libraries, but
+      # adding the `-m68020' flag to GCC prevents building anything better,
+      # like `-m68040'.
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+      ;;
+
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+
+    mingw* | cygwin* | pw32* | os2*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
+      # (--disable-auto-import) libraries
+      m4_if([$1], [GCJ], [],
+       [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+      ;;
+
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+      ;;
+
+    interix[[3-9]]*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+
+    msdosdjgpp*)
+      # Just because we use GCC doesn't mean we suddenly get shared libraries
+      # on systems that don't support them.
+      _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+      enable_shared=no
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+       _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
+      fi
+      ;;
+
+    hpux*)
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case $host_cpu in
+      hppa*64*|ia64*)
+       # +Z the default
+       ;;
+      *)
+       _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+       ;;
+      esac
+      ;;
+
+    *)
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+      ;;
+    esac
+  else
+    # PORTME Check for flag to pass linker flags through the system compiler.
+    case $host_os in
+    aix*)
+      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      if test "$host_cpu" = ia64; then
+       # AIX 5 now supports IA64 processor
+       _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      else
+       _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
+      fi
+      ;;
+      darwin*)
+        # PIC is the default on this platform
+        # Common symbols not allowed in MH_DYLIB files
+       case $cc_basename in
+         xlc*)
+         _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon'
+         _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+         ;;
+       esac
+       ;;
+
+    mingw* | cygwin* | pw32* | os2*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      m4_if([$1], [GCJ], [],
+       [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+      ;;
+
+    hpux9* | hpux10* | hpux11*)
+      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case $host_cpu in
+      hppa*64*|ia64*)
+       # +Z the default
+       ;;
+      *)
+       _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+       ;;
+      esac
+      # Is there a better lt_prog_compiler_static that works with the bundled CC?
+      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      # PIC (with -KPIC) is the default.
+      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+      ;;
+
+    newsos6)
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
+
+    linux* | k*bsd*-gnu)
+      case $cc_basename in
+      icc* | ecc*)
+       _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+       _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+       _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
+        ;;
+      pgcc* | pgf77* | pgf90* | pgf95*)
+        # Portland Group compilers (*not* the Pentium gcc compiler,
+       # which looks to be a dead project)
+       _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+       _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+       _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+        ;;
+      ccc*)
+        _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+        # All Alpha code is PIC.
+        _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+        ;;
+      *)
+        case `$CC -V 2>&1 | sed 5q` in
+       *Sun\ C*)
+         # Sun C 5.9
+         _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+         _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+         _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+         ;;
+       *Sun\ F*)
+         # Sun Fortran 8.3 passes all unrecognized flags to the linker
+         _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+         _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+         _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)=''
+         ;;
+       esac
+       ;;
+      esac
+      ;;
+
+    osf3* | osf4* | osf5*)
+      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      # All OSF/1 code is PIC.
+      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+      ;;
+
+    rdos*)
+      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+      ;;
+
+    solaris*)
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      case $cc_basename in
+      f77* | f90* | f95*)
+       _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
+      *)
+       _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
+      esac
+      ;;
+
+    sunos4*)
+      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
+
+    sysv4 | sysv4.2uw2* | sysv4.3*)
+      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec ;then
+       _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
+       _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      fi
+      ;;
+
+    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
+
+    unicos*)
+      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+      ;;
+
+    uts4*)
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
+
+    *)
+      _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+      ;;
+    esac
+  fi
+])
+AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)])
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then
+  AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works],
+    _LT_AC_TAGVAR(lt_cv_prog_compiler_pic_works, $1),
+    [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [],
+    [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in
+     "" | " "*) ;;
+     *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;;
+     esac],
+    [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
+     _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
+fi
+case $host_os in
+  # For platforms which do not support PIC, -DPIC is meaningless:
+  *djgpp*)
+    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
+    ;;
+  *)
+    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])"
+    ;;
+esac
+
+#
+# Check to make sure the static flag actually works.
+#
+wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_AC_TAGVAR(lt_prog_compiler_static, $1)\"
+AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
+  _LT_AC_TAGVAR(lt_cv_prog_compiler_static_works, $1),
+  $lt_tmp_static_flag,
+  [],
+  [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=])
+])
+
+
+# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME])
+# ------------------------------------
+# See if the linker supports building shared libraries.
+AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS],
+[AC_REQUIRE([LT_AC_PROG_SED])dnl
+AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+ifelse([$1],[CXX],[
+  _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  case $host_os in
+  aix[[4-9]]*)
+    # If we're using GNU nm, then we don't want the "-C" option.
+    # -C means demangle to AIX nm, but means don't demangle with GNU nm
+    if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
+      _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
+    else
+      _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
+    fi
+    ;;
+  pw32*)
+    _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
+  ;;
+  cygwin* | mingw*)
+    _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
+  ;;
+  *)
+    _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  ;;
+  esac
+  _LT_AC_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
+],[
+  runpath_var=
+  _LT_AC_TAGVAR(allow_undefined_flag, $1)=
+  _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+  _LT_AC_TAGVAR(archive_cmds, $1)=
+  _LT_AC_TAGVAR(archive_expsym_cmds, $1)=
+  _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)=
+  _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)=
+  _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
+  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
+  _LT_AC_TAGVAR(thread_safe_flag_spec, $1)=
+  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
+  _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
+  _LT_AC_TAGVAR(hardcode_direct, $1)=no
+  _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
+  _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+  _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
+  _LT_AC_TAGVAR(hardcode_automatic, $1)=no
+  _LT_AC_TAGVAR(module_cmds, $1)=
+  _LT_AC_TAGVAR(module_expsym_cmds, $1)=
+  _LT_AC_TAGVAR(always_export_symbols, $1)=no
+  _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  # include_expsyms should be a list of space-separated symbols to be *always*
+  # included in the symbol list
+  _LT_AC_TAGVAR(include_expsyms, $1)=
+  # exclude_expsyms can be an extended regexp of symbols to exclude
+  # it will be wrapped by ` (' and `)$', so one must not match beginning or
+  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+  # as well as any symbol that contains `d'.
+  _LT_AC_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
+  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+  # platforms (ab)use it in PIC code, but their linkers get confused if
+  # the symbol is explicitly referenced.  Since portable code cannot
+  # rely on this symbol name, it's probably fine to never include it in
+  # preloaded symbol tables.
+  # Exclude shared library initialization/finalization symbols.
+dnl Note also adjust exclude_expsyms for C++ above.
+  extract_expsyms_cmds=
+  # Just being paranoid about ensuring that cc_basename is set.
+  _LT_CC_BASENAME([$compiler])
+  case $host_os in
+  cygwin* | mingw* | pw32*)
+    # FIXME: the MSVC++ port hasn't been tested in a loooong time
+    # When not using gcc, we currently assume that we are using
+    # Microsoft Visual C++.
+    if test "$GCC" != yes; then
+      with_gnu_ld=no
+    fi
+    ;;
+  interix*)
+    # we just hope/assume this is gcc and not c89 (= MSVC++)
+    with_gnu_ld=yes
+    ;;
+  openbsd*)
+    with_gnu_ld=no
+    ;;
+  esac
+
+  _LT_AC_TAGVAR(ld_shlibs, $1)=yes
+  if test "$with_gnu_ld" = yes; then
+    # If archive_cmds runs LD, not CC, wlarc should be empty
+    wlarc='${wl}'
+
+    # Set some defaults for GNU ld with shared library support. These
+    # are reset later if shared libraries are not supported. Putting them
+    # here allows them to be overridden if necessary.
+    runpath_var=LD_RUN_PATH
+    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
+    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+    # ancient GNU ld didn't support --whole-archive et. al.
+    if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
+       _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+      else
+       _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
+    fi
+    supports_anon_versioning=no
+    case `$LD -v 2>/dev/null` in
+      *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
+      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+      *\ 2.11.*) ;; # other 2.11 versions
+      *) supports_anon_versioning=yes ;;
+    esac
+
+    # See if GNU ld supports shared libraries.
+    case $host_os in
+    aix[[3-9]]*)
+      # On AIX/PPC, the GNU linker is very broken
+      if test "$host_cpu" != ia64; then
+       _LT_AC_TAGVAR(ld_shlibs, $1)=no
+       cat <<EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support.  If you
+*** really care for shared libraries, you may want to modify your PATH
+*** so that a non-GNU linker is found, and then restart.
+
+EOF
+      fi
+      ;;
+
+    amigaos*)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+
+      # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
+      # that the semantics of dynamic libraries on AmigaOS, at least up
+      # to version 4, is to share data among multiple programs linked
+      # with the same dynamic library.  Since this doesn't match the
+      # behavior of shared libraries on other platforms, we can't use
+      # them.
+      _LT_AC_TAGVAR(ld_shlibs, $1)=no
+      ;;
+
+    beos*)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+       _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+       # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+       # support --undefined.  This deserves some investigation.  FIXME
+       _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      else
+       _LT_AC_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+
+    cygwin* | mingw* | pw32*)
+      # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+      # as there is no search path for DLLs.
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+      _LT_AC_TAGVAR(always_export_symbols, $1)=no
+      _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+      _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
+
+      if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
+        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+       # If the export-symbols file already is a .def file (1st line
+       # is EXPORTS), use it as is; otherwise, prepend...
+       _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+         cp $export_symbols $output_objdir/$soname.def;
+       else
+         echo EXPORTS > $output_objdir/$soname.def;
+         cat $export_symbols >> $output_objdir/$soname.def;
+       fi~
+       $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+      else
+       _LT_AC_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+
+    interix[[3-9]]*)
+      _LT_AC_TAGVAR(hardcode_direct, $1)=no
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+      # Instead, shared libraries are loaded at an image base (0x10000000 by
+      # default) and relocated if they conflict, which is a slow very memory
+      # consuming and fragmenting process.  To avoid this, we pick a random,
+      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      ;;
+
+    gnu* | linux* | k*bsd*-gnu)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+       tmp_addflag=
+       case $cc_basename,$host_cpu in
+       pgcc*)                          # Portland Group C compiler
+         _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+         tmp_addflag=' $pic_flag'
+         ;;
+       pgf77* | pgf90* | pgf95*)       # Portland Group f77 and f90 compilers
+         _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+         tmp_addflag=' $pic_flag -Mnomain' ;;
+       ecc*,ia64* | icc*,ia64*)                # Intel C compiler on ia64
+         tmp_addflag=' -i_dynamic' ;;
+       efc*,ia64* | ifort*,ia64*)      # Intel Fortran compiler on ia64
+         tmp_addflag=' -i_dynamic -nofor_main' ;;
+       ifc* | ifort*)                  # Intel Fortran compiler
+         tmp_addflag=' -nofor_main' ;;
+       esac
+       case `$CC -V 2>&1 | sed 5q` in
+       *Sun\ C*)                       # Sun C 5.9
+         _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+         tmp_sharedflag='-G' ;;
+       *Sun\ F*)                       # Sun Fortran 8.3
+         tmp_sharedflag='-G' ;;
+       *)
+         tmp_sharedflag='-shared' ;;
+       esac
+       _LT_AC_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+       if test $supports_anon_versioning = yes; then
+         _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $output_objdir/$libname.ver~
+  cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+  $echo "local: *; };" >> $output_objdir/$libname.ver~
+         $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+       fi
+      else
+       _LT_AC_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+
+    netbsd*)
+      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+       _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+       wlarc=
+      else
+       _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+       _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      fi
+      ;;
+
+    solaris*)
+      if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
+       _LT_AC_TAGVAR(ld_shlibs, $1)=no
+       cat <<EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+EOF
+      elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+       _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+       _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+       _LT_AC_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+      case `$LD -v 2>&1` in
+        *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*)
+       _LT_AC_TAGVAR(ld_shlibs, $1)=no
+       cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+       ;;
+       *)
+         if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+           _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
+           _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
+           _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
+         else
+           _LT_AC_TAGVAR(ld_shlibs, $1)=no
+         fi
+       ;;
+      esac
+      ;;
+
+    sunos4*)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      wlarc=
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    *)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+       _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+       _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+       _LT_AC_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+    esac
+
+    if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no; then
+      runpath_var=
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
+      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
+      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
+    fi
+  else
+    # PORTME fill in a description of your system's linker (not GNU ld)
+    case $host_os in
+    aix3*)
+      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+      _LT_AC_TAGVAR(always_export_symbols, $1)=yes
+      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+      # Note: this linker hardcodes the directories in LIBPATH if there
+      # are no directories specified by -L.
+      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+       # Neither direct hardcoding nor static linking is supported with a
+       # broken collect2.
+       _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
+      fi
+      ;;
+
+    aix[[4-9]]*)
+      if test "$host_cpu" = ia64; then
+       # On IA64, the linker does run time linking by default, so we don't
+       # have to do anything special.
+       aix_use_runtimelinking=no
+       exp_sym_flag='-Bexport'
+       no_entry_flag=""
+      else
+       # If we're using GNU nm, then we don't want the "-C" option.
+       # -C means demangle to AIX nm, but means don't demangle with GNU nm
+       if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
+         _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
+       else
+         _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
+       fi
+       aix_use_runtimelinking=no
+
+       # Test if we are trying to use run time linking or normal
+       # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+       # need to do runtime linking.
+       case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
+         for ld_flag in $LDFLAGS; do
+         if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+           aix_use_runtimelinking=yes
+           break
+         fi
+         done
+         ;;
+       esac
+
+       exp_sym_flag='-bexport'
+       no_entry_flag='-bnoentry'
+      fi
+
+      # When large executables or shared objects are built, AIX ld can
+      # have problems creating the table of contents.  If linking a library
+      # or program results in "error TOC overflow" add -mminimal-toc to
+      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+      _LT_AC_TAGVAR(archive_cmds, $1)=''
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
+      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+
+      if test "$GCC" = yes; then
+       case $host_os in aix4.[[012]]|aix4.[[012]].*)
+       # We only want to do this on AIX 4.2 and lower, the check
+       # below for broken collect2 doesn't work under 4.3+
+         collect2name=`${CC} -print-prog-name=collect2`
+         if test -f "$collect2name" && \
+          strings "$collect2name" | grep resolve_lib_name >/dev/null
+         then
+         # We have reworked collect2
+         :
+         else
+         # We have old collect2
+         _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
+         # It fails to find uninstalled libraries when the uninstalled
+         # path is not listed in the libpath.  Setting hardcode_minus_L
+         # to unsupported forces relinking
+         _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+         _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+         _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
+         fi
+         ;;
+       esac
+       shared_flag='-shared'
+       if test "$aix_use_runtimelinking" = yes; then
+         shared_flag="$shared_flag "'${wl}-G'
+       fi
+      else
+       # not using gcc
+       if test "$host_cpu" = ia64; then
+       # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+       # chokes on -Wl,-G. The following line is correct:
+         shared_flag='-G'
+       else
+         if test "$aix_use_runtimelinking" = yes; then
+           shared_flag='${wl}-G'
+         else
+           shared_flag='${wl}-bM:SRE'
+         fi
+       fi
+      fi
+
+      # It seems that -bexpall does not export symbols beginning with
+      # underscore (_), so it is better to generate a list of symbols to export.
+      _LT_AC_TAGVAR(always_export_symbols, $1)=yes
+      if test "$aix_use_runtimelinking" = yes; then
+       # Warning - without using the other runtime loading flags (-brtl),
+       # -berok will link without error, but may produce a broken library.
+       _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
+       # Determine the default libpath from the value encoded in an empty executable.
+       _LT_AC_SYS_LIBPATH_AIX
+       _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+       _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+       else
+       if test "$host_cpu" = ia64; then
+         _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+         _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+         _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+       else
+        # Determine the default libpath from the value encoded in an empty executable.
+        _LT_AC_SYS_LIBPATH_AIX
+        _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+         # Warning - without using the other run time loading flags,
+         # -berok will link without error, but may produce a broken library.
+         _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+         _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+         # Exported symbols can be pulled into shared objects from archives
+         _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+         _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
+         # This is similar to how AIX traditionally builds its shared libraries.
+         _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+       fi
+      fi
+      ;;
+
+    amigaos*)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+      # see comment about different semantics on the GNU ld section
+      _LT_AC_TAGVAR(ld_shlibs, $1)=no
+      ;;
+
+    bsdi[[45]]*)
+      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
+      ;;
+
+    cygwin* | mingw* | pw32*)
+      # When not using gcc, we currently assume that we are using
+      # Microsoft Visual C++.
+      # hardcode_libdir_flag_spec is actually meaningless, as there is
+      # no search path for DLLs.
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+      # Tell ltmain to make .lib files, not .a files.
+      libext=lib
+      # Tell ltmain to make .dll files, not .so files.
+      shrext_cmds=".dll"
+      # FIXME: Setting linknames here is a bad hack.
+      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
+      # The linker will automatically build a .lib file if we build a DLL.
+      _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true'
+      # FIXME: Should let the user specify the lib program.
+      _LT_AC_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
+      _LT_AC_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`'
+      _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+      ;;
+
+    darwin* | rhapsody*)
+      _LT_AC_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
+      _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+      _LT_AC_TAGVAR(hardcode_direct, $1)=no
+      _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=''
+      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+    if test "$GCC" = yes ; then
+       output_verbose_link_cmd='echo'
+        _LT_AC_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+        _LT_AC_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+        _LT_AC_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+        _LT_AC_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+    else
+      case $cc_basename in
+        xlc*)
+         output_verbose_link_cmd='echo'
+         _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
+         _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
+         _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          ;;
+       *)
+         _LT_AC_TAGVAR(ld_shlibs, $1)=no
+          ;;
+      esac
+    fi
+      ;;
+
+    dgux*)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    freebsd1*)
+      _LT_AC_TAGVAR(ld_shlibs, $1)=no
+      ;;
+
+    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+    # support.  Future versions do this automatically, but an explicit c++rt0.o
+    # does not break anything, and helps significantly (at the cost of a little
+    # extra space).
+    freebsd2.2*)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+    freebsd2*)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+    freebsd* | dragonfly*)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    hpux9*)
+      if test "$GCC" = yes; then
+       _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      else
+       _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      fi
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+
+      # hardcode_minus_L: Not really in the search PATH,
+      # but as the default location of the library.
+      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+      ;;
+
+    hpux10*)
+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+       _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+      else
+       _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      if test "$with_gnu_ld" = no; then
+       _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+       _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
+       _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+       _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+
+       # hardcode_minus_L: Not really in the search PATH,
+       # but as the default location of the library.
+       _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+      fi
+      ;;
+
+    hpux11*)
+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+       case $host_cpu in
+       hppa*64*)
+         _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+         ;;
+       ia64*)
+         _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+         ;;
+       *)
+         _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+         ;;
+       esac
+      else
+       case $host_cpu in
+       hppa*64*)
+         _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+         ;;
+       ia64*)
+         _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+         ;;
+       *)
+         _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+         ;;
+       esac
+      fi
+      if test "$with_gnu_ld" = no; then
+       _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+       _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
+       case $host_cpu in
+       hppa*64*|ia64*)
+         _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
+         _LT_AC_TAGVAR(hardcode_direct, $1)=no
+         _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+         ;;
+       *)
+         _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+         _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+
+         # hardcode_minus_L: Not really in the search PATH,
+         # but as the default location of the library.
+         _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+         ;;
+       esac
+      fi
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      if test "$GCC" = yes; then
+       _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      else
+       _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+       _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
+      fi
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+      ;;
+
+    netbsd*)
+      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+       _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
+      else
+       _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
+      fi
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    newsos6)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    openbsd*)
+      if test -f /usr/libexec/ld.so; then
+       _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+       _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+       if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+         _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+         _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+         _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+         _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+       else
+         case $host_os in
+          openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
+            _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+            _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+            ;;
+          *)
+            _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+            _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+            ;;
+         esac
+        fi
+      else
+       _LT_AC_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+
+    os2*)
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+      _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+      _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+      ;;
+
+    osf3*)
+      if test "$GCC" = yes; then
+       _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+       _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      else
+       _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+       _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+      fi
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+      ;;
+
+    osf4* | osf5*)     # as osf3* with the addition of -msym flag
+      if test "$GCC" = yes; then
+       _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+       _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+       _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+      else
+       _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+       _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+       _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
+       $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
+
+       # Both c and cxx compiler support -rpath directly
+       _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+      fi
+      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+      ;;
+
+    solaris*)
+      _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
+      if test "$GCC" = yes; then
+       wlarc='${wl}'
+       _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+       _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+         $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
+      else
+       wlarc=''
+       _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+       _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+       $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
+      fi
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      case $host_os in
+      solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+      *)
+       # The compiler driver will combine and reorder linker options,
+       # but understands `-z linker_flag'.  GCC discards it without `$wl',
+       # but is careful enough not to reorder.
+       # Supported since Solaris 2.6 (maybe 2.5.1?)
+       if test "$GCC" = yes; then
+         _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+       else
+         _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
+       fi
+       ;;
+      esac
+      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+      ;;
+
+    sunos4*)
+      if test "x$host_vendor" = xsequent; then
+       # Use $CC to link under sequent, because it throws in some extra .o
+       # files that make .init and .fini sections work.
+       _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+       _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    sysv4)
+      case $host_vendor in
+       sni)
+         _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+         _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true???
+       ;;
+       siemens)
+         ## LD is ld it makes a PLAMLIB
+         ## CC just makes a GrossModule.
+         _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+         _LT_AC_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
+         _LT_AC_TAGVAR(hardcode_direct, $1)=no
+        ;;
+       motorola)
+         _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+         _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
+       ;;
+      esac
+      runpath_var='LD_RUN_PATH'
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    sysv4.3*)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+       _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+       _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+       runpath_var=LD_RUN_PATH
+       hardcode_runpath_var=yes
+       _LT_AC_TAGVAR(ld_shlibs, $1)=yes
+      fi
+      ;;
+
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
+      _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+      _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+       _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+       _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+       _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+       _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6*)
+      # Note: We can NOT use -z defs as we might desire, because we do not
+      # link with -lc, and that would cause any symbols used from libc to
+      # always be unresolved, which means just about no library would
+      # ever link correctly.  If we're not using GNU ld we use -z text
+      # though, which does catch some bad symbols but isn't as heavy-handed
+      # as -z defs.
+      _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+      _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+      _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
+      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
+      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+       _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+       _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+       _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+       _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    uts4*)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    *)
+      _LT_AC_TAGVAR(ld_shlibs, $1)=no
+      ;;
+    esac
+  fi
+])
+AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
+test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)" in
+x|xyes)
+  # Assume -lc should be added
+  _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
+
+  if test "$enable_shared" = yes && test "$GCC" = yes; then
+    case $_LT_AC_TAGVAR(archive_cmds, $1) in
+    *'~'*)
+      # FIXME: we may have to deal with multi-command sequences.
+      ;;
+    '$CC '*)
+      # Test whether the compiler implicitly links with -lc since on some
+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
+      # to ld, don't add -lc before -lgcc.
+      AC_MSG_CHECKING([whether -lc should be explicitly linked in])
+      $rm conftest*
+      echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+      if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
+        soname=conftest
+        lib=conftest
+        libobjs=conftest.$ac_objext
+        deplibs=
+        wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
+       pic_flag=$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
+        compiler_flags=-v
+        linker_flags=-v
+        verstring=
+        output_objdir=.
+        libname=conftest
+        lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1)
+        _LT_AC_TAGVAR(allow_undefined_flag, $1)=
+        if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1)
+        then
+         _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+        else
+         _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
+        fi
+        _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
+      else
+        cat conftest.err 1>&5
+      fi
+      $rm conftest*
+      AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)])
+      ;;
+    esac
+  fi
+  ;;
+esac
+])# AC_LIBTOOL_PROG_LD_SHLIBS
+
+
+# _LT_AC_FILE_LTDLL_C
+# -------------------
+# Be careful that the start marker always follows a newline.
+AC_DEFUN([_LT_AC_FILE_LTDLL_C], [
+# /* ltdll.c starts here */
+# #define WIN32_LEAN_AND_MEAN
+# #include <windows.h>
+# #undef WIN32_LEAN_AND_MEAN
+# #include <stdio.h>
+#
+# #ifndef __CYGWIN__
+# #  ifdef __CYGWIN32__
+# #    define __CYGWIN__ __CYGWIN32__
+# #  endif
+# #endif
+#
+# #ifdef __cplusplus
+# extern "C" {
+# #endif
+# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
+# #ifdef __cplusplus
+# }
+# #endif
+#
+# #ifdef __CYGWIN__
+# #include <cygwin/cygwin_dll.h>
+# DECLARE_CYGWIN_DLL( DllMain );
+# #endif
+# HINSTANCE __hDllInstance_base;
+#
+# BOOL APIENTRY
+# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
+# {
+#   __hDllInstance_base = hInst;
+#   return TRUE;
+# }
+# /* ltdll.c ends here */
+])# _LT_AC_FILE_LTDLL_C
+
+
+# _LT_AC_TAGVAR(VARNAME, [TAGNAME])
+# ---------------------------------
+AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])])
+
+
+# old names
+AC_DEFUN([AM_PROG_LIBTOOL],   [AC_PROG_LIBTOOL])
+AC_DEFUN([AM_ENABLE_SHARED],  [AC_ENABLE_SHARED($@)])
+AC_DEFUN([AM_ENABLE_STATIC],  [AC_ENABLE_STATIC($@)])
+AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
+AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
+AC_DEFUN([AM_PROG_LD],        [AC_PROG_LD])
+AC_DEFUN([AM_PROG_NM],        [AC_PROG_NM])
+
+# This is just to silence aclocal about the macro not being used
+ifelse([AC_DISABLE_FAST_INSTALL])
+
+AC_DEFUN([LT_AC_PROG_GCJ],
+[AC_CHECK_TOOL(GCJ, gcj, no)
+  test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
+  AC_SUBST(GCJFLAGS)
+])
+
+AC_DEFUN([LT_AC_PROG_RC],
+[AC_CHECK_TOOL(RC, windres, no)
+])
+
+
+# Cheap backport of AS_EXECUTABLE_P and required macros
+# from Autoconf 2.59; we should not use $as_executable_p directly.
+
+# _AS_TEST_PREPARE
+# ----------------
+m4_ifndef([_AS_TEST_PREPARE],
+[m4_defun([_AS_TEST_PREPARE],
+[if test -x / >/dev/null 2>&1; then
+  as_executable_p='test -x'
+else
+  as_executable_p='test -f'
+fi
+])])# _AS_TEST_PREPARE
+
+# AS_EXECUTABLE_P
+# ---------------
+# Check whether a file is executable.
+m4_ifndef([AS_EXECUTABLE_P],
+[m4_defun([AS_EXECUTABLE_P],
+[AS_REQUIRE([_AS_TEST_PREPARE])dnl
+$as_executable_p $1[]dnl
+])])# AS_EXECUTABLE_P
+
+# NOTE: This macro has been submitted for inclusion into   #
+#  GNU Autoconf as AC_PROG_SED.  When it is available in   #
+#  a released version of Autoconf we should remove this    #
+#  macro and use it instead.                               #
+# LT_AC_PROG_SED
+# --------------
+# Check for a fully-functional sed program, that truncates
+# as few characters as possible.  Prefer GNU sed if found.
+AC_DEFUN([LT_AC_PROG_SED],
+[AC_MSG_CHECKING([for a sed that does not truncate output])
+AC_CACHE_VAL(lt_cv_path_SED,
+[# Loop through the user's path and test for sed and gsed.
+# Then use that list of sed's as ones to test for truncation.
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for lt_ac_prog in sed gsed; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      if AS_EXECUTABLE_P(["$as_dir/$lt_ac_prog$ac_exec_ext"]); then
+        lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
+      fi
+    done
+  done
+done
+IFS=$as_save_IFS
+lt_ac_max=0
+lt_ac_count=0
+# Add /usr/xpg4/bin/sed as it is typically found on Solaris
+# along with /bin/sed that truncates output.
+for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
+  test ! -f $lt_ac_sed && continue
+  cat /dev/null > conftest.in
+  lt_ac_count=0
+  echo $ECHO_N "0123456789$ECHO_C" >conftest.in
+  # Check for GNU sed and select it if it is found.
+  if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
+    lt_cv_path_SED=$lt_ac_sed
+    break
+  fi
+  while true; do
+    cat conftest.in conftest.in >conftest.tmp
+    mv conftest.tmp conftest.in
+    cp conftest.in conftest.nl
+    echo >>conftest.nl
+    $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
+    cmp -s conftest.out conftest.nl || break
+    # 10000 chars as input seems more than enough
+    test $lt_ac_count -gt 10 && break
+    lt_ac_count=`expr $lt_ac_count + 1`
+    if test $lt_ac_count -gt $lt_ac_max; then
+      lt_ac_max=$lt_ac_count
+      lt_cv_path_SED=$lt_ac_sed
+    fi
+  done
+done
+])
+SED=$lt_cv_path_SED
+AC_SUBST([SED])
+AC_MSG_RESULT([$SED])
+])
+
 # nls.m4 serial 3 (gettext-0.15)
 dnl Copyright (C) 1995-2003, 2005-2006 Free Software Foundation, Inc.
 dnl This file is free software; the Free Software Foundation
index 4ad2ae5988ec907f648fa5fd96e29328892f1cc6..f374c7cec43a57f4854290743a1ae1c1923c0a28 100644 (file)
@@ -12,6 +12,9 @@
 /* Define to 1 if you have the `dcgettext' function. */
 #undef HAVE_DCGETTEXT
 
+/* Define to 1 if you have the <dlfcn.h> header file. */
+#undef HAVE_DLFCN_H
+
 /* Define if the GNU gettext() function is already present or preinstalled. */
 #undef HAVE_GETTEXT
 
index d1b91f43bf247aaac3efc5c9cb60f62a1ad6e117..ae52b2766e4800e0eaf78447112ddecda0701af3 100755 (executable)
@@ -11,6 +11,7 @@ AC_ISC_POSIX
 AC_PROG_CC
 AM_PROG_CC_STDC
 AC_HEADER_STDC
+AC_PROG_LIBTOOL
 
 dnl ***************************************************************************
 dnl Internatinalization
@@ -21,11 +22,12 @@ AC_DEFINE_UNQUOTED(GETTEXT_PACKAGE,"$GETTEXT_PACKAGE", [GETTEXT package name])
 AM_GLIB_GNU_GETTEXT
 IT_PROG_INTLTOOL([0.35.0])
 
-dnl AM_PROG_LIBTOOL
-
-PKG_CHECK_MODULES([CHIMARA], [gtk+-2.0 >= 2.8 gthread-2.0])
+PKG_CHECK_MODULES([CHIMARA], [gtk+-2.0 >= 2.8 gthread-2.0 gmodule-2.0])
 AC_SUBST(CHIMARA_CFLAGS)
 AC_SUBST(CHIMARA_LIBS)
+PKG_CHECK_MODULES([TEST], [gtk+-2.0 >= 2.8])
+AC_SUBST(TEST_CFLAGS)
+AC_SUBST(TEST_LIBS)
 
 ##################################################
 # Check for gtk-doc.
diff --git a/ltmain.sh b/ltmain.sh
new file mode 100755 (executable)
index 0000000..8e5a930
--- /dev/null
+++ b/ltmain.sh
@@ -0,0 +1,6930 @@
+# ltmain.sh - Provide generalized library-building support services.
+# NOTE: Changing this file will not affect anything until you rerun configure.
+#
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
+# 2007  Free Software Foundation, Inc.
+# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+basename="s,^.*/,,g"
+
+# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
+# is ksh but when the shell is invoked as "sh" and the current value of
+# the _XPG environment variable is not equal to 1 (one), the special
+# positional parameter $0, within a function call, is the name of the
+# function.
+progpath="$0"
+
+# The name of this program:
+progname=`echo "$progpath" | $SED $basename`
+modename="$progname"
+
+# Global variables:
+EXIT_SUCCESS=0
+EXIT_FAILURE=1
+
+PROGRAM=ltmain.sh
+PACKAGE=libtool
+VERSION=1.5.24
+TIMESTAMP=" (1.1220.2.456 2007/06/24 02:25:32)"
+
+# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE).
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
+fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# Check that we have a working $echo.
+if test "X$1" = X--no-reexec; then
+  # Discard the --no-reexec flag, and continue.
+  shift
+elif test "X$1" = X--fallback-echo; then
+  # Avoid inline document here, it may be left over
+  :
+elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
+  # Yippee, $echo works!
+  :
+else
+  # Restart under the correct shell, and then maybe $echo will work.
+  exec $SHELL "$progpath" --no-reexec ${1+"$@"}
+fi
+
+if test "X$1" = X--fallback-echo; then
+  # used as fallback echo
+  shift
+  cat <<EOF
+$*
+EOF
+  exit $EXIT_SUCCESS
+fi
+
+default_mode=
+help="Try \`$progname --help' for more information."
+magic="%%%MAGIC variable%%%"
+mkdir="mkdir"
+mv="mv -f"
+rm="rm -f"
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed="${SED}"' -e 1s/^X//'
+sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
+# test EBCDIC or ASCII
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+    # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+  SP2NL='tr \040 \012'
+  NL2SP='tr \015\012 \040\040'
+  ;;
+ *) # EBCDIC based system
+  SP2NL='tr \100 \n'
+  NL2SP='tr \r\n \100\100'
+  ;;
+esac
+
+# NLS nuisances.
+# Only set LANG and LC_ALL to C if already set.
+# These must not be set unconditionally because not all systems understand
+# e.g. LANG=C (notably SCO).
+# We save the old values to restore during execute mode.
+for lt_var in LANG LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+do
+  eval "if test \"\${$lt_var+set}\" = set; then
+         save_$lt_var=\$$lt_var
+         $lt_var=C
+         export $lt_var
+       fi"
+done
+
+# Make sure IFS has a sensible default
+lt_nl='
+'
+IFS="  $lt_nl"
+
+if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
+  $echo "$modename: not configured to build any kind of library" 1>&2
+  $echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
+  exit $EXIT_FAILURE
+fi
+
+# Global variables.
+mode=$default_mode
+nonopt=
+prev=
+prevopt=
+run=
+show="$echo"
+show_help=
+execute_dlfiles=
+duplicate_deps=no
+preserve_args=
+lo2o="s/\\.lo\$/.${objext}/"
+o2lo="s/\\.${objext}\$/.lo/"
+extracted_archives=
+extracted_serial=0
+
+#####################################
+# Shell function definitions:
+# This seems to be the best place for them
+
+# func_mktempdir [string]
+# Make a temporary directory that won't clash with other running
+# libtool processes, and avoids race conditions if possible.  If
+# given, STRING is the basename for that directory.
+func_mktempdir ()
+{
+    my_template="${TMPDIR-/tmp}/${1-$progname}"
+
+    if test "$run" = ":"; then
+      # Return a directory name, but don't create it in dry-run mode
+      my_tmpdir="${my_template}-$$"
+    else
+
+      # If mktemp works, use that first and foremost
+      my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
+
+      if test ! -d "$my_tmpdir"; then
+       # Failing that, at least try and use $RANDOM to avoid a race
+       my_tmpdir="${my_template}-${RANDOM-0}$$"
+
+       save_mktempdir_umask=`umask`
+       umask 0077
+       $mkdir "$my_tmpdir"
+       umask $save_mktempdir_umask
+      fi
+
+      # If we're not in dry-run mode, bomb out on failure
+      test -d "$my_tmpdir" || {
+        $echo "cannot create temporary directory \`$my_tmpdir'" 1>&2
+       exit $EXIT_FAILURE
+      }
+    fi
+
+    $echo "X$my_tmpdir" | $Xsed
+}
+
+
+# func_win32_libid arg
+# return the library type of file 'arg'
+#
+# Need a lot of goo to handle *both* DLLs and import libs
+# Has to be a shell function in order to 'eat' the argument
+# that is supplied when $file_magic_command is called.
+func_win32_libid ()
+{
+  win32_libid_type="unknown"
+  win32_fileres=`file -L $1 2>/dev/null`
+  case $win32_fileres in
+  *ar\ archive\ import\ library*) # definitely import
+    win32_libid_type="x86 archive import"
+    ;;
+  *ar\ archive*) # could be an import, or static
+    if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \
+      $EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
+      win32_nmres=`eval $NM -f posix -A $1 | \
+       $SED -n -e '1,100{
+               / I /{
+                       s,.*,import,
+                       p
+                       q
+                       }
+               }'`
+      case $win32_nmres in
+      import*)  win32_libid_type="x86 archive import";;
+      *)        win32_libid_type="x86 archive static";;
+      esac
+    fi
+    ;;
+  *DLL*)
+    win32_libid_type="x86 DLL"
+    ;;
+  *executable*) # but shell scripts are "executable" too...
+    case $win32_fileres in
+    *MS\ Windows\ PE\ Intel*)
+      win32_libid_type="x86 DLL"
+      ;;
+    esac
+    ;;
+  esac
+  $echo $win32_libid_type
+}
+
+
+# func_infer_tag arg
+# Infer tagged configuration to use if any are available and
+# if one wasn't chosen via the "--tag" command line option.
+# Only attempt this if the compiler in the base compile
+# command doesn't match the default compiler.
+# arg is usually of the form 'gcc ...'
+func_infer_tag ()
+{
+    if test -n "$available_tags" && test -z "$tagname"; then
+      CC_quoted=
+      for arg in $CC; do
+       case $arg in
+         *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+         arg="\"$arg\""
+         ;;
+       esac
+       CC_quoted="$CC_quoted $arg"
+      done
+      case $@ in
+      # Blanks in the command may have been stripped by the calling shell,
+      # but not from the CC environment variable when configure was run.
+      " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ;;
+      # Blanks at the start of $base_compile will cause this to fail
+      # if we don't check for them as well.
+      *)
+       for z in $available_tags; do
+         if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
+           # Evaluate the configuration.
+           eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
+           CC_quoted=
+           for arg in $CC; do
+           # Double-quote args containing other shell metacharacters.
+           case $arg in
+             *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \     ]*|*]*|"")
+             arg="\"$arg\""
+             ;;
+           esac
+           CC_quoted="$CC_quoted $arg"
+         done
+           case "$@ " in
+             " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*)
+             # The compiler in the base compile command matches
+             # the one in the tagged configuration.
+             # Assume this is the tagged configuration we want.
+             tagname=$z
+             break
+             ;;
+           esac
+         fi
+       done
+       # If $tagname still isn't set, then no tagged configuration
+       # was found and let the user know that the "--tag" command
+       # line option must be used.
+       if test -z "$tagname"; then
+         $echo "$modename: unable to infer tagged configuration"
+         $echo "$modename: specify a tag with \`--tag'" 1>&2
+         exit $EXIT_FAILURE
+#        else
+#          $echo "$modename: using $tagname tagged configuration"
+       fi
+       ;;
+      esac
+    fi
+}
+
+
+# func_extract_an_archive dir oldlib
+func_extract_an_archive ()
+{
+    f_ex_an_ar_dir="$1"; shift
+    f_ex_an_ar_oldlib="$1"
+
+    $show "(cd $f_ex_an_ar_dir && $AR x $f_ex_an_ar_oldlib)"
+    $run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" || exit $?
+    if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
+     :
+    else
+      $echo "$modename: ERROR: object name conflicts: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" 1>&2
+      exit $EXIT_FAILURE
+    fi
+}
+
+# func_extract_archives gentop oldlib ...
+func_extract_archives ()
+{
+    my_gentop="$1"; shift
+    my_oldlibs=${1+"$@"}
+    my_oldobjs=""
+    my_xlib=""
+    my_xabs=""
+    my_xdir=""
+    my_status=""
+
+    $show "${rm}r $my_gentop"
+    $run ${rm}r "$my_gentop"
+    $show "$mkdir $my_gentop"
+    $run $mkdir "$my_gentop"
+    my_status=$?
+    if test "$my_status" -ne 0 && test ! -d "$my_gentop"; then
+      exit $my_status
+    fi
+
+    for my_xlib in $my_oldlibs; do
+      # Extract the objects.
+      case $my_xlib in
+       [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
+       *) my_xabs=`pwd`"/$my_xlib" ;;
+      esac
+      my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'`
+      my_xlib_u=$my_xlib
+      while :; do
+        case " $extracted_archives " in
+       *" $my_xlib_u "*)
+         extracted_serial=`expr $extracted_serial + 1`
+         my_xlib_u=lt$extracted_serial-$my_xlib ;;
+       *) break ;;
+       esac
+      done
+      extracted_archives="$extracted_archives $my_xlib_u"
+      my_xdir="$my_gentop/$my_xlib_u"
+
+      $show "${rm}r $my_xdir"
+      $run ${rm}r "$my_xdir"
+      $show "$mkdir $my_xdir"
+      $run $mkdir "$my_xdir"
+      exit_status=$?
+      if test "$exit_status" -ne 0 && test ! -d "$my_xdir"; then
+       exit $exit_status
+      fi
+      case $host in
+      *-darwin*)
+       $show "Extracting $my_xabs"
+       # Do not bother doing anything if just a dry run
+       if test -z "$run"; then
+         darwin_orig_dir=`pwd`
+         cd $my_xdir || exit $?
+         darwin_archive=$my_xabs
+         darwin_curdir=`pwd`
+         darwin_base_archive=`$echo "X$darwin_archive" | $Xsed -e 's%^.*/%%'`
+         darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP Architectures 2>/dev/null`
+         if test -n "$darwin_arches"; then 
+           darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'`
+           darwin_arch=
+           $show "$darwin_base_archive has multiple architectures $darwin_arches"
+           for darwin_arch in  $darwin_arches ; do
+             mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+             lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
+             cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+             func_extract_an_archive "`pwd`" "${darwin_base_archive}"
+             cd "$darwin_curdir"
+             $rm "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
+           done # $darwin_arches
+      ## Okay now we have a bunch of thin objects, gotta fatten them up :)
+           darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print| xargs basename | sort -u | $NL2SP`
+           darwin_file=
+           darwin_files=
+           for darwin_file in $darwin_filelist; do
+             darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
+             lipo -create -output "$darwin_file" $darwin_files
+           done # $darwin_filelist
+           ${rm}r unfat-$$
+           cd "$darwin_orig_dir"
+         else
+           cd "$darwin_orig_dir"
+           func_extract_an_archive "$my_xdir" "$my_xabs"
+         fi # $darwin_arches
+       fi # $run
+       ;;
+      *)
+        func_extract_an_archive "$my_xdir" "$my_xabs"
+        ;;
+      esac
+      my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
+    done
+    func_extract_archives_result="$my_oldobjs"
+}
+# End of Shell function definitions
+#####################################
+
+# Darwin sucks
+eval std_shrext=\"$shrext_cmds\"
+
+disable_libs=no
+
+# Parse our command line options once, thoroughly.
+while test "$#" -gt 0
+do
+  arg="$1"
+  shift
+
+  case $arg in
+  -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;;
+  *) optarg= ;;
+  esac
+
+  # If the previous option needs an argument, assign it.
+  if test -n "$prev"; then
+    case $prev in
+    execute_dlfiles)
+      execute_dlfiles="$execute_dlfiles $arg"
+      ;;
+    tag)
+      tagname="$arg"
+      preserve_args="${preserve_args}=$arg"
+
+      # Check whether tagname contains only valid characters
+      case $tagname in
+      *[!-_A-Za-z0-9,/]*)
+       $echo "$progname: invalid tag name: $tagname" 1>&2
+       exit $EXIT_FAILURE
+       ;;
+      esac
+
+      case $tagname in
+      CC)
+       # Don't test for the "default" C tag, as we know, it's there, but
+       # not specially marked.
+       ;;
+      *)
+       if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$progpath" > /dev/null; then
+         taglist="$taglist $tagname"
+         # Evaluate the configuration.
+         eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`"
+       else
+         $echo "$progname: ignoring unknown tag $tagname" 1>&2
+       fi
+       ;;
+      esac
+      ;;
+    *)
+      eval "$prev=\$arg"
+      ;;
+    esac
+
+    prev=
+    prevopt=
+    continue
+  fi
+
+  # Have we seen a non-optional argument yet?
+  case $arg in
+  --help)
+    show_help=yes
+    ;;
+
+  --version)
+    echo "\
+$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP
+
+Copyright (C) 2007  Free Software Foundation, Inc.
+This is free software; see the source for copying conditions.  There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+    exit $?
+    ;;
+
+  --config)
+    ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $progpath
+    # Now print the configurations for the tags.
+    for tagname in $taglist; do
+      ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath"
+    done
+    exit $?
+    ;;
+
+  --debug)
+    $echo "$progname: enabling shell trace mode"
+    set -x
+    preserve_args="$preserve_args $arg"
+    ;;
+
+  --dry-run | -n)
+    run=:
+    ;;
+
+  --features)
+    $echo "host: $host"
+    if test "$build_libtool_libs" = yes; then
+      $echo "enable shared libraries"
+    else
+      $echo "disable shared libraries"
+    fi
+    if test "$build_old_libs" = yes; then
+      $echo "enable static libraries"
+    else
+      $echo "disable static libraries"
+    fi
+    exit $?
+    ;;
+
+  --finish) mode="finish" ;;
+
+  --mode) prevopt="--mode" prev=mode ;;
+  --mode=*) mode="$optarg" ;;
+
+  --preserve-dup-deps) duplicate_deps="yes" ;;
+
+  --quiet | --silent)
+    show=:
+    preserve_args="$preserve_args $arg"
+    ;;
+
+  --tag)
+    prevopt="--tag"
+    prev=tag
+    preserve_args="$preserve_args --tag"
+    ;;
+  --tag=*)
+    set tag "$optarg" ${1+"$@"}
+    shift
+    prev=tag
+    preserve_args="$preserve_args --tag"
+    ;;
+
+  -dlopen)
+    prevopt="-dlopen"
+    prev=execute_dlfiles
+    ;;
+
+  -*)
+    $echo "$modename: unrecognized option \`$arg'" 1>&2
+    $echo "$help" 1>&2
+    exit $EXIT_FAILURE
+    ;;
+
+  *)
+    nonopt="$arg"
+    break
+    ;;
+  esac
+done
+
+if test -n "$prevopt"; then
+  $echo "$modename: option \`$prevopt' requires an argument" 1>&2
+  $echo "$help" 1>&2
+  exit $EXIT_FAILURE
+fi
+
+case $disable_libs in
+no) 
+  ;;
+shared)
+  build_libtool_libs=no
+  build_old_libs=yes
+  ;;
+static)
+  build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
+  ;;
+esac
+
+# If this variable is set in any of the actions, the command in it
+# will be execed at the end.  This prevents here-documents from being
+# left over by shells.
+exec_cmd=
+
+if test -z "$show_help"; then
+
+  # Infer the operation mode.
+  if test -z "$mode"; then
+    $echo "*** Warning: inferring the mode of operation is deprecated." 1>&2
+    $echo "*** Future versions of Libtool will require --mode=MODE be specified." 1>&2
+    case $nonopt in
+    *cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*)
+      mode=link
+      for arg
+      do
+       case $arg in
+       -c)
+          mode=compile
+          break
+          ;;
+       esac
+      done
+      ;;
+    *db | *dbx | *strace | *truss)
+      mode=execute
+      ;;
+    *install*|cp|mv)
+      mode=install
+      ;;
+    *rm)
+      mode=uninstall
+      ;;
+    *)
+      # If we have no mode, but dlfiles were specified, then do execute mode.
+      test -n "$execute_dlfiles" && mode=execute
+
+      # Just use the default operation mode.
+      if test -z "$mode"; then
+       if test -n "$nonopt"; then
+         $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2
+       else
+         $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2
+       fi
+      fi
+      ;;
+    esac
+  fi
+
+  # Only execute mode is allowed to have -dlopen flags.
+  if test -n "$execute_dlfiles" && test "$mode" != execute; then
+    $echo "$modename: unrecognized option \`-dlopen'" 1>&2
+    $echo "$help" 1>&2
+    exit $EXIT_FAILURE
+  fi
+
+  # Change the help message to a mode-specific one.
+  generic_help="$help"
+  help="Try \`$modename --help --mode=$mode' for more information."
+
+  # These modes are in order of execution frequency so that they run quickly.
+  case $mode in
+  # libtool compile mode
+  compile)
+    modename="$modename: compile"
+    # Get the compilation command and the source file.
+    base_compile=
+    srcfile="$nonopt"  #  always keep a non-empty value in "srcfile"
+    suppress_opt=yes
+    suppress_output=
+    arg_mode=normal
+    libobj=
+    later=
+
+    for arg
+    do
+      case $arg_mode in
+      arg  )
+       # do not "continue".  Instead, add this to base_compile
+       lastarg="$arg"
+       arg_mode=normal
+       ;;
+
+      target )
+       libobj="$arg"
+       arg_mode=normal
+       continue
+       ;;
+
+      normal )
+       # Accept any command-line options.
+       case $arg in
+       -o)
+         if test -n "$libobj" ; then
+           $echo "$modename: you cannot specify \`-o' more than once" 1>&2
+           exit $EXIT_FAILURE
+         fi
+         arg_mode=target
+         continue
+         ;;
+
+       -static | -prefer-pic | -prefer-non-pic)
+         later="$later $arg"
+         continue
+         ;;
+
+       -no-suppress)
+         suppress_opt=no
+         continue
+         ;;
+
+       -Xcompiler)
+         arg_mode=arg  #  the next one goes into the "base_compile" arg list
+         continue      #  The current "srcfile" will either be retained or
+         ;;            #  replaced later.  I would guess that would be a bug.
+
+       -Wc,*)
+         args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"`
+         lastarg=
+         save_ifs="$IFS"; IFS=','
+         for arg in $args; do
+           IFS="$save_ifs"
+
+           # Double-quote args containing other shell metacharacters.
+           # Many Bourne shells cannot handle close brackets correctly
+           # in scan sets, so we specify it separately.
+           case $arg in
+             *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \     ]*|*]*|"")
+             arg="\"$arg\""
+             ;;
+           esac
+           lastarg="$lastarg $arg"
+         done
+         IFS="$save_ifs"
+         lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"`
+
+         # Add the arguments to base_compile.
+         base_compile="$base_compile $lastarg"
+         continue
+         ;;
+
+       * )
+         # Accept the current argument as the source file.
+         # The previous "srcfile" becomes the current argument.
+         #
+         lastarg="$srcfile"
+         srcfile="$arg"
+         ;;
+       esac  #  case $arg
+       ;;
+      esac    #  case $arg_mode
+
+      # Aesthetically quote the previous argument.
+      lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"`
+
+      case $lastarg in
+      # Double-quote args containing other shell metacharacters.
+      # Many Bourne shells cannot handle close brackets correctly
+      # in scan sets, and some SunOS ksh mistreat backslash-escaping
+      # in scan sets (worked around with variable expansion),
+      # and furthermore cannot handle '|' '&' '(' ')' in scan sets 
+      # at all, so we specify them separately.
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \    ]*|*]*|"")
+       lastarg="\"$lastarg\""
+       ;;
+      esac
+
+      base_compile="$base_compile $lastarg"
+    done # for arg
+
+    case $arg_mode in
+    arg)
+      $echo "$modename: you must specify an argument for -Xcompile"
+      exit $EXIT_FAILURE
+      ;;
+    target)
+      $echo "$modename: you must specify a target with \`-o'" 1>&2
+      exit $EXIT_FAILURE
+      ;;
+    *)
+      # Get the name of the library object.
+      [ -z "$libobj" ] && libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`
+      ;;
+    esac
+
+    # Recognize several different file suffixes.
+    # If the user specifies -o file.o, it is replaced with file.lo
+    xform='[cCFSifmso]'
+    case $libobj in
+    *.ada) xform=ada ;;
+    *.adb) xform=adb ;;
+    *.ads) xform=ads ;;
+    *.asm) xform=asm ;;
+    *.c++) xform=c++ ;;
+    *.cc) xform=cc ;;
+    *.ii) xform=ii ;;
+    *.class) xform=class ;;
+    *.cpp) xform=cpp ;;
+    *.cxx) xform=cxx ;;
+    *.[fF][09]?) xform=[fF][09]. ;;
+    *.for) xform=for ;;
+    *.java) xform=java ;;
+    *.obj) xform=obj ;;
+    esac
+
+    libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
+
+    case $libobj in
+    *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;;
+    *)
+      $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2
+      exit $EXIT_FAILURE
+      ;;
+    esac
+
+    func_infer_tag $base_compile
+
+    for arg in $later; do
+      case $arg in
+      -static)
+       build_old_libs=yes
+       continue
+       ;;
+
+      -prefer-pic)
+       pic_mode=yes
+       continue
+       ;;
+
+      -prefer-non-pic)
+       pic_mode=no
+       continue
+       ;;
+      esac
+    done
+
+    qlibobj=`$echo "X$libobj" | $Xsed -e "$sed_quote_subst"`
+    case $qlibobj in
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \    ]*|*]*|"")
+       qlibobj="\"$qlibobj\"" ;;
+    esac
+    test "X$libobj" != "X$qlibobj" \
+       && $echo "X$libobj" | grep '[]~#^*{};<>?"'"'"'  &()|`$[]' \
+       && $echo "$modename: libobj name \`$libobj' may not contain shell special characters."
+    objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
+    xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
+    if test "X$xdir" = "X$obj"; then
+      xdir=
+    else
+      xdir=$xdir/
+    fi
+    lobj=${xdir}$objdir/$objname
+
+    if test -z "$base_compile"; then
+      $echo "$modename: you must specify a compilation command" 1>&2
+      $echo "$help" 1>&2
+      exit $EXIT_FAILURE
+    fi
+
+    # Delete any leftover library objects.
+    if test "$build_old_libs" = yes; then
+      removelist="$obj $lobj $libobj ${libobj}T"
+    else
+      removelist="$lobj $libobj ${libobj}T"
+    fi
+
+    $run $rm $removelist
+    trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
+
+    # On Cygwin there's no "real" PIC flag so we must build both object types
+    case $host_os in
+    cygwin* | mingw* | pw32* | os2*)
+      pic_mode=default
+      ;;
+    esac
+    if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
+      # non-PIC code in shared libraries is not supported
+      pic_mode=default
+    fi
+
+    # Calculate the filename of the output object if compiler does
+    # not support -o with -c
+    if test "$compiler_c_o" = no; then
+      output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
+      lockfile="$output_obj.lock"
+      removelist="$removelist $output_obj $lockfile"
+      trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
+    else
+      output_obj=
+      need_locks=no
+      lockfile=
+    fi
+
+    # Lock this critical section if it is needed
+    # We use this script file to make the link, it avoids creating a new file
+    if test "$need_locks" = yes; then
+      until $run ln "$progpath" "$lockfile" 2>/dev/null; do
+       $show "Waiting for $lockfile to be removed"
+       sleep 2
+      done
+    elif test "$need_locks" = warn; then
+      if test -f "$lockfile"; then
+       $echo "\
+*** ERROR, $lockfile exists and contains:
+`cat $lockfile 2>/dev/null`
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+       $run $rm $removelist
+       exit $EXIT_FAILURE
+      fi
+      $echo "$srcfile" > "$lockfile"
+    fi
+
+    if test -n "$fix_srcfile_path"; then
+      eval srcfile=\"$fix_srcfile_path\"
+    fi
+    qsrcfile=`$echo "X$srcfile" | $Xsed -e "$sed_quote_subst"`
+    case $qsrcfile in
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \    ]*|*]*|"")
+      qsrcfile="\"$qsrcfile\"" ;;
+    esac
+
+    $run $rm "$libobj" "${libobj}T"
+
+    # Create a libtool object file (analogous to a ".la" file),
+    # but don't create it if we're doing a dry run.
+    test -z "$run" && cat > ${libobj}T <<EOF
+# $libobj - a libtool object file
+# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# Name of the PIC object.
+EOF
+
+    # Only build a PIC object if we are building libtool libraries.
+    if test "$build_libtool_libs" = yes; then
+      # Without this assignment, base_compile gets emptied.
+      fbsd_hideous_sh_bug=$base_compile
+
+      if test "$pic_mode" != no; then
+       command="$base_compile $qsrcfile $pic_flag"
+      else
+       # Don't build PIC code
+       command="$base_compile $qsrcfile"
+      fi
+
+      if test ! -d "${xdir}$objdir"; then
+       $show "$mkdir ${xdir}$objdir"
+       $run $mkdir ${xdir}$objdir
+       exit_status=$?
+       if test "$exit_status" -ne 0 && test ! -d "${xdir}$objdir"; then
+         exit $exit_status
+       fi
+      fi
+
+      if test -z "$output_obj"; then
+       # Place PIC objects in $objdir
+       command="$command -o $lobj"
+      fi
+
+      $run $rm "$lobj" "$output_obj"
+
+      $show "$command"
+      if $run eval "$command"; then :
+      else
+       test -n "$output_obj" && $run $rm $removelist
+       exit $EXIT_FAILURE
+      fi
+
+      if test "$need_locks" = warn &&
+        test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
+       $echo "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+       $run $rm $removelist
+       exit $EXIT_FAILURE
+      fi
+
+      # Just move the object if needed, then go on to compile the next one
+      if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
+       $show "$mv $output_obj $lobj"
+       if $run $mv $output_obj $lobj; then :
+       else
+         error=$?
+         $run $rm $removelist
+         exit $error
+       fi
+      fi
+
+      # Append the name of the PIC object to the libtool object file.
+      test -z "$run" && cat >> ${libobj}T <<EOF
+pic_object='$objdir/$objname'
+
+EOF
+
+      # Allow error messages only from the first compilation.
+      if test "$suppress_opt" = yes; then
+        suppress_output=' >/dev/null 2>&1'
+      fi
+    else
+      # No PIC object so indicate it doesn't exist in the libtool
+      # object file.
+      test -z "$run" && cat >> ${libobj}T <<EOF
+pic_object=none
+
+EOF
+    fi
+
+    # Only build a position-dependent object if we build old libraries.
+    if test "$build_old_libs" = yes; then
+      if test "$pic_mode" != yes; then
+       # Don't build PIC code
+       command="$base_compile $qsrcfile"
+      else
+       command="$base_compile $qsrcfile $pic_flag"
+      fi
+      if test "$compiler_c_o" = yes; then
+       command="$command -o $obj"
+      fi
+
+      # Suppress compiler output if we already did a PIC compilation.
+      command="$command$suppress_output"
+      $run $rm "$obj" "$output_obj"
+      $show "$command"
+      if $run eval "$command"; then :
+      else
+       $run $rm $removelist
+       exit $EXIT_FAILURE
+      fi
+
+      if test "$need_locks" = warn &&
+        test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
+       $echo "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+       $run $rm $removelist
+       exit $EXIT_FAILURE
+      fi
+
+      # Just move the object if needed
+      if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
+       $show "$mv $output_obj $obj"
+       if $run $mv $output_obj $obj; then :
+       else
+         error=$?
+         $run $rm $removelist
+         exit $error
+       fi
+      fi
+
+      # Append the name of the non-PIC object the libtool object file.
+      # Only append if the libtool object file exists.
+      test -z "$run" && cat >> ${libobj}T <<EOF
+# Name of the non-PIC object.
+non_pic_object='$objname'
+
+EOF
+    else
+      # Append the name of the non-PIC object the libtool object file.
+      # Only append if the libtool object file exists.
+      test -z "$run" && cat >> ${libobj}T <<EOF
+# Name of the non-PIC object.
+non_pic_object=none
+
+EOF
+    fi
+
+    $run $mv "${libobj}T" "${libobj}"
+
+    # Unlock the critical section if it was locked
+    if test "$need_locks" != no; then
+      $run $rm "$lockfile"
+    fi
+
+    exit $EXIT_SUCCESS
+    ;;
+
+  # libtool link mode
+  link | relink)
+    modename="$modename: link"
+    case $host in
+    *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+      # It is impossible to link a dll without this setting, and
+      # we shouldn't force the makefile maintainer to figure out
+      # which system we are compiling for in order to pass an extra
+      # flag for every libtool invocation.
+      # allow_undefined=no
+
+      # FIXME: Unfortunately, there are problems with the above when trying
+      # to make a dll which has undefined symbols, in which case not
+      # even a static library is built.  For now, we need to specify
+      # -no-undefined on the libtool link line when we can be certain
+      # that all symbols are satisfied, otherwise we get a static library.
+      allow_undefined=yes
+      ;;
+    *)
+      allow_undefined=yes
+      ;;
+    esac
+    libtool_args="$nonopt"
+    base_compile="$nonopt $@"
+    compile_command="$nonopt"
+    finalize_command="$nonopt"
+
+    compile_rpath=
+    finalize_rpath=
+    compile_shlibpath=
+    finalize_shlibpath=
+    convenience=
+    old_convenience=
+    deplibs=
+    old_deplibs=
+    compiler_flags=
+    linker_flags=
+    dllsearchpath=
+    lib_search_path=`pwd`
+    inst_prefix_dir=
+
+    avoid_version=no
+    dlfiles=
+    dlprefiles=
+    dlself=no
+    export_dynamic=no
+    export_symbols=
+    export_symbols_regex=
+    generated=
+    libobjs=
+    ltlibs=
+    module=no
+    no_install=no
+    objs=
+    non_pic_objects=
+    notinst_path= # paths that contain not-installed libtool libraries
+    precious_files_regex=
+    prefer_static_libs=no
+    preload=no
+    prev=
+    prevarg=
+    release=
+    rpath=
+    xrpath=
+    perm_rpath=
+    temp_rpath=
+    thread_safe=no
+    vinfo=
+    vinfo_number=no
+
+    func_infer_tag $base_compile
+
+    # We need to know -static, to get the right output filenames.
+    for arg
+    do
+      case $arg in
+      -all-static | -static | -static-libtool-libs)
+       case $arg in
+       -all-static)
+         if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
+           $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2
+         fi
+         if test -n "$link_static_flag"; then
+           dlopen_self=$dlopen_self_static
+         fi
+         prefer_static_libs=yes
+         ;;
+       -static)
+         if test -z "$pic_flag" && test -n "$link_static_flag"; then
+           dlopen_self=$dlopen_self_static
+         fi
+         prefer_static_libs=built
+         ;;
+       -static-libtool-libs)
+         if test -z "$pic_flag" && test -n "$link_static_flag"; then
+           dlopen_self=$dlopen_self_static
+         fi
+         prefer_static_libs=yes
+         ;;
+       esac
+       build_libtool_libs=no
+       build_old_libs=yes
+       break
+       ;;
+      esac
+    done
+
+    # See if our shared archives depend on static archives.
+    test -n "$old_archive_from_new_cmds" && build_old_libs=yes
+
+    # Go through the arguments, transforming them on the way.
+    while test "$#" -gt 0; do
+      arg="$1"
+      shift
+      case $arg in
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \    ]*|*]*|"")
+       qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test
+       ;;
+      *) qarg=$arg ;;
+      esac
+      libtool_args="$libtool_args $qarg"
+
+      # If the previous option needs an argument, assign it.
+      if test -n "$prev"; then
+       case $prev in
+       output)
+         compile_command="$compile_command @OUTPUT@"
+         finalize_command="$finalize_command @OUTPUT@"
+         ;;
+       esac
+
+       case $prev in
+       dlfiles|dlprefiles)
+         if test "$preload" = no; then
+           # Add the symbol object into the linking commands.
+           compile_command="$compile_command @SYMFILE@"
+           finalize_command="$finalize_command @SYMFILE@"
+           preload=yes
+         fi
+         case $arg in
+         *.la | *.lo) ;;  # We handle these cases below.
+         force)
+           if test "$dlself" = no; then
+             dlself=needless
+             export_dynamic=yes
+           fi
+           prev=
+           continue
+           ;;
+         self)
+           if test "$prev" = dlprefiles; then
+             dlself=yes
+           elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
+             dlself=yes
+           else
+             dlself=needless
+             export_dynamic=yes
+           fi
+           prev=
+           continue
+           ;;
+         *)
+           if test "$prev" = dlfiles; then
+             dlfiles="$dlfiles $arg"
+           else
+             dlprefiles="$dlprefiles $arg"
+           fi
+           prev=
+           continue
+           ;;
+         esac
+         ;;
+       expsyms)
+         export_symbols="$arg"
+         if test ! -f "$arg"; then
+           $echo "$modename: symbol file \`$arg' does not exist"
+           exit $EXIT_FAILURE
+         fi
+         prev=
+         continue
+         ;;
+       expsyms_regex)
+         export_symbols_regex="$arg"
+         prev=
+         continue
+         ;;
+       inst_prefix)
+         inst_prefix_dir="$arg"
+         prev=
+         continue
+         ;;
+       precious_regex)
+         precious_files_regex="$arg"
+         prev=
+         continue
+         ;;
+       release)
+         release="-$arg"
+         prev=
+         continue
+         ;;
+       objectlist)
+         if test -f "$arg"; then
+           save_arg=$arg
+           moreargs=
+           for fil in `cat $save_arg`
+           do
+#            moreargs="$moreargs $fil"
+             arg=$fil
+             # A libtool-controlled object.
+
+             # Check to see that this really is a libtool object.
+             if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+               pic_object=
+               non_pic_object=
+
+               # Read the .lo file
+               # If there is no directory component, then add one.
+               case $arg in
+               */* | *\\*) . $arg ;;
+               *) . ./$arg ;;
+               esac
+
+               if test -z "$pic_object" || \
+                  test -z "$non_pic_object" ||
+                  test "$pic_object" = none && \
+                  test "$non_pic_object" = none; then
+                 $echo "$modename: cannot find name of object for \`$arg'" 1>&2
+                 exit $EXIT_FAILURE
+               fi
+
+               # Extract subdirectory from the argument.
+               xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
+               if test "X$xdir" = "X$arg"; then
+                 xdir=
+               else
+                 xdir="$xdir/"
+               fi
+
+               if test "$pic_object" != none; then
+                 # Prepend the subdirectory the object is found in.
+                 pic_object="$xdir$pic_object"
+
+                 if test "$prev" = dlfiles; then
+                   if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+                     dlfiles="$dlfiles $pic_object"
+                     prev=
+                     continue
+                   else
+                     # If libtool objects are unsupported, then we need to preload.
+                     prev=dlprefiles
+                   fi
+                 fi
+
+                 # CHECK ME:  I think I busted this.  -Ossama
+                 if test "$prev" = dlprefiles; then
+                   # Preload the old-style object.
+                   dlprefiles="$dlprefiles $pic_object"
+                   prev=
+                 fi
+
+                 # A PIC object.
+                 libobjs="$libobjs $pic_object"
+                 arg="$pic_object"
+               fi
+
+               # Non-PIC object.
+               if test "$non_pic_object" != none; then
+                 # Prepend the subdirectory the object is found in.
+                 non_pic_object="$xdir$non_pic_object"
+
+                 # A standard non-PIC object
+                 non_pic_objects="$non_pic_objects $non_pic_object"
+                 if test -z "$pic_object" || test "$pic_object" = none ; then
+                   arg="$non_pic_object"
+                 fi
+               else
+                 # If the PIC object exists, use it instead.
+                 # $xdir was prepended to $pic_object above.
+                 non_pic_object="$pic_object"
+                 non_pic_objects="$non_pic_objects $non_pic_object"
+               fi
+             else
+               # Only an error if not doing a dry-run.
+               if test -z "$run"; then
+                 $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
+                 exit $EXIT_FAILURE
+               else
+                 # Dry-run case.
+
+                 # Extract subdirectory from the argument.
+                 xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
+                 if test "X$xdir" = "X$arg"; then
+                   xdir=
+                 else
+                   xdir="$xdir/"
+                 fi
+
+                 pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
+                 non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
+                 libobjs="$libobjs $pic_object"
+                 non_pic_objects="$non_pic_objects $non_pic_object"
+               fi
+             fi
+           done
+         else
+           $echo "$modename: link input file \`$save_arg' does not exist"
+           exit $EXIT_FAILURE
+         fi
+         arg=$save_arg
+         prev=
+         continue
+         ;;
+       rpath | xrpath)
+         # We need an absolute path.
+         case $arg in
+         [\\/]* | [A-Za-z]:[\\/]*) ;;
+         *)
+           $echo "$modename: only absolute run-paths are allowed" 1>&2
+           exit $EXIT_FAILURE
+           ;;
+         esac
+         if test "$prev" = rpath; then
+           case "$rpath " in
+           *" $arg "*) ;;
+           *) rpath="$rpath $arg" ;;
+           esac
+         else
+           case "$xrpath " in
+           *" $arg "*) ;;
+           *) xrpath="$xrpath $arg" ;;
+           esac
+         fi
+         prev=
+         continue
+         ;;
+       xcompiler)
+         compiler_flags="$compiler_flags $qarg"
+         prev=
+         compile_command="$compile_command $qarg"
+         finalize_command="$finalize_command $qarg"
+         continue
+         ;;
+       xlinker)
+         linker_flags="$linker_flags $qarg"
+         compiler_flags="$compiler_flags $wl$qarg"
+         prev=
+         compile_command="$compile_command $wl$qarg"
+         finalize_command="$finalize_command $wl$qarg"
+         continue
+         ;;
+       xcclinker)
+         linker_flags="$linker_flags $qarg"
+         compiler_flags="$compiler_flags $qarg"
+         prev=
+         compile_command="$compile_command $qarg"
+         finalize_command="$finalize_command $qarg"
+         continue
+         ;;
+       shrext)
+         shrext_cmds="$arg"
+         prev=
+         continue
+         ;;
+       darwin_framework|darwin_framework_skip)
+         test "$prev" = "darwin_framework" && compiler_flags="$compiler_flags $arg"
+         compile_command="$compile_command $arg"
+         finalize_command="$finalize_command $arg"
+         prev=
+         continue
+         ;;
+       *)
+         eval "$prev=\"\$arg\""
+         prev=
+         continue
+         ;;
+       esac
+      fi # test -n "$prev"
+
+      prevarg="$arg"
+
+      case $arg in
+      -all-static)
+       if test -n "$link_static_flag"; then
+         compile_command="$compile_command $link_static_flag"
+         finalize_command="$finalize_command $link_static_flag"
+       fi
+       continue
+       ;;
+
+      -allow-undefined)
+       # FIXME: remove this flag sometime in the future.
+       $echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2
+       continue
+       ;;
+
+      -avoid-version)
+       avoid_version=yes
+       continue
+       ;;
+
+      -dlopen)
+       prev=dlfiles
+       continue
+       ;;
+
+      -dlpreopen)
+       prev=dlprefiles
+       continue
+       ;;
+
+      -export-dynamic)
+       export_dynamic=yes
+       continue
+       ;;
+
+      -export-symbols | -export-symbols-regex)
+       if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
+         $echo "$modename: more than one -exported-symbols argument is not allowed"
+         exit $EXIT_FAILURE
+       fi
+       if test "X$arg" = "X-export-symbols"; then
+         prev=expsyms
+       else
+         prev=expsyms_regex
+       fi
+       continue
+       ;;
+
+      -framework|-arch|-isysroot)
+       case " $CC " in
+         *" ${arg} ${1} "* | *" ${arg} ${1} "*) 
+               prev=darwin_framework_skip ;;
+         *) compiler_flags="$compiler_flags $arg"
+            prev=darwin_framework ;;
+       esac
+       compile_command="$compile_command $arg"
+       finalize_command="$finalize_command $arg"
+       continue
+       ;;
+
+      -inst-prefix-dir)
+       prev=inst_prefix
+       continue
+       ;;
+
+      # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
+      # so, if we see these flags be careful not to treat them like -L
+      -L[A-Z][A-Z]*:*)
+       case $with_gcc/$host in
+       no/*-*-irix* | /*-*-irix*)
+         compile_command="$compile_command $arg"
+         finalize_command="$finalize_command $arg"
+         ;;
+       esac
+       continue
+       ;;
+
+      -L*)
+       dir=`$echo "X$arg" | $Xsed -e 's/^-L//'`
+       # We need an absolute path.
+       case $dir in
+       [\\/]* | [A-Za-z]:[\\/]*) ;;
+       *)
+         absdir=`cd "$dir" && pwd`
+         if test -z "$absdir"; then
+           $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2
+           absdir="$dir"
+           notinst_path="$notinst_path $dir"
+         fi
+         dir="$absdir"
+         ;;
+       esac
+       case "$deplibs " in
+       *" -L$dir "*) ;;
+       *)
+         deplibs="$deplibs -L$dir"
+         lib_search_path="$lib_search_path $dir"
+         ;;
+       esac
+       case $host in
+       *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+         testbindir=`$echo "X$dir" | $Xsed -e 's*/lib$*/bin*'`
+         case :$dllsearchpath: in
+         *":$dir:"*) ;;
+         *) dllsearchpath="$dllsearchpath:$dir";;
+         esac
+         case :$dllsearchpath: in
+         *":$testbindir:"*) ;;
+         *) dllsearchpath="$dllsearchpath:$testbindir";;
+         esac
+         ;;
+       esac
+       continue
+       ;;
+
+      -l*)
+       if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
+         case $host in
+         *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos*)
+           # These systems don't actually have a C or math library (as such)
+           continue
+           ;;
+         *-*-os2*)
+           # These systems don't actually have a C library (as such)
+           test "X$arg" = "X-lc" && continue
+           ;;
+         *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+           # Do not include libc due to us having libc/libc_r.
+           test "X$arg" = "X-lc" && continue
+           ;;
+         *-*-rhapsody* | *-*-darwin1.[012])
+           # Rhapsody C and math libraries are in the System framework
+           deplibs="$deplibs -framework System"
+           continue
+           ;;
+         *-*-sco3.2v5* | *-*-sco5v6*)
+           # Causes problems with __ctype
+           test "X$arg" = "X-lc" && continue
+           ;;
+         *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+           # Compiler inserts libc in the correct place for threads to work
+           test "X$arg" = "X-lc" && continue
+           ;;
+         esac
+       elif test "X$arg" = "X-lc_r"; then
+        case $host in
+        *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+          # Do not include libc_r directly, use -pthread flag.
+          continue
+          ;;
+        esac
+       fi
+       deplibs="$deplibs $arg"
+       continue
+       ;;
+
+      # Tru64 UNIX uses -model [arg] to determine the layout of C++
+      # classes, name mangling, and exception handling.
+      -model)
+       compile_command="$compile_command $arg"
+       compiler_flags="$compiler_flags $arg"
+       finalize_command="$finalize_command $arg"
+       prev=xcompiler
+       continue
+       ;;
+
+     -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
+       compiler_flags="$compiler_flags $arg"
+       compile_command="$compile_command $arg"
+       finalize_command="$finalize_command $arg"
+       continue
+       ;;
+
+      -module)
+       module=yes
+       continue
+       ;;
+
+      # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
+      # -r[0-9][0-9]* specifies the processor on the SGI compiler
+      # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
+      # +DA*, +DD* enable 64-bit mode on the HP compiler
+      # -q* pass through compiler args for the IBM compiler
+      # -m* pass through architecture-specific compiler args for GCC
+      # -m*, -t[45]*, -txscale* pass through architecture-specific
+      # compiler args for GCC
+      # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC
+      # -F/path gives path to uninstalled frameworks, gcc on darwin
+      # @file GCC response files
+      -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
+      -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*)
+
+       # Unknown arguments in both finalize_command and compile_command need
+       # to be aesthetically quoted because they are evaled later.
+       arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+       case $arg in
+       *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \   ]*|*]*|"")
+         arg="\"$arg\""
+         ;;
+       esac
+        compile_command="$compile_command $arg"
+        finalize_command="$finalize_command $arg"
+        compiler_flags="$compiler_flags $arg"
+        continue
+        ;;
+
+      -shrext)
+       prev=shrext
+       continue
+       ;;
+
+      -no-fast-install)
+       fast_install=no
+       continue
+       ;;
+
+      -no-install)
+       case $host in
+       *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin*)
+         # The PATH hackery in wrapper scripts is required on Windows
+         # and Darwin in order for the loader to find any dlls it needs.
+         $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2
+         $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2
+         fast_install=no
+         ;;
+       *) no_install=yes ;;
+       esac
+       continue
+       ;;
+
+      -no-undefined)
+       allow_undefined=no
+       continue
+       ;;
+
+      -objectlist)
+       prev=objectlist
+       continue
+       ;;
+
+      -o) prev=output ;;
+
+      -precious-files-regex)
+       prev=precious_regex
+       continue
+       ;;
+
+      -release)
+       prev=release
+       continue
+       ;;
+
+      -rpath)
+       prev=rpath
+       continue
+       ;;
+
+      -R)
+       prev=xrpath
+       continue
+       ;;
+
+      -R*)
+       dir=`$echo "X$arg" | $Xsed -e 's/^-R//'`
+       # We need an absolute path.
+       case $dir in
+       [\\/]* | [A-Za-z]:[\\/]*) ;;
+       *)
+         $echo "$modename: only absolute run-paths are allowed" 1>&2
+         exit $EXIT_FAILURE
+         ;;
+       esac
+       case "$xrpath " in
+       *" $dir "*) ;;
+       *) xrpath="$xrpath $dir" ;;
+       esac
+       continue
+       ;;
+
+      -static | -static-libtool-libs)
+       # The effects of -static are defined in a previous loop.
+       # We used to do the same as -all-static on platforms that
+       # didn't have a PIC flag, but the assumption that the effects
+       # would be equivalent was wrong.  It would break on at least
+       # Digital Unix and AIX.
+       continue
+       ;;
+
+      -thread-safe)
+       thread_safe=yes
+       continue
+       ;;
+
+      -version-info)
+       prev=vinfo
+       continue
+       ;;
+      -version-number)
+       prev=vinfo
+       vinfo_number=yes
+       continue
+       ;;
+
+      -Wc,*)
+       args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'`
+       arg=
+       save_ifs="$IFS"; IFS=','
+       for flag in $args; do
+         IFS="$save_ifs"
+         case $flag in
+           *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \       ]*|*]*|"")
+           flag="\"$flag\""
+           ;;
+         esac
+         arg="$arg $wl$flag"
+         compiler_flags="$compiler_flags $flag"
+       done
+       IFS="$save_ifs"
+       arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
+       ;;
+
+      -Wl,*)
+       args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'`
+       arg=
+       save_ifs="$IFS"; IFS=','
+       for flag in $args; do
+         IFS="$save_ifs"
+         case $flag in
+           *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \       ]*|*]*|"")
+           flag="\"$flag\""
+           ;;
+         esac
+         arg="$arg $wl$flag"
+         compiler_flags="$compiler_flags $wl$flag"
+         linker_flags="$linker_flags $flag"
+       done
+       IFS="$save_ifs"
+       arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
+       ;;
+
+      -Xcompiler)
+       prev=xcompiler
+       continue
+       ;;
+
+      -Xlinker)
+       prev=xlinker
+       continue
+       ;;
+
+      -XCClinker)
+       prev=xcclinker
+       continue
+       ;;
+
+      # Some other compiler flag.
+      -* | +*)
+       # Unknown arguments in both finalize_command and compile_command need
+       # to be aesthetically quoted because they are evaled later.
+       arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+       case $arg in
+       *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \   ]*|*]*|"")
+         arg="\"$arg\""
+         ;;
+       esac
+       ;;
+
+      *.$objext)
+       # A standard object.
+       objs="$objs $arg"
+       ;;
+
+      *.lo)
+       # A libtool-controlled object.
+
+       # Check to see that this really is a libtool object.
+       if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+         pic_object=
+         non_pic_object=
+
+         # Read the .lo file
+         # If there is no directory component, then add one.
+         case $arg in
+         */* | *\\*) . $arg ;;
+         *) . ./$arg ;;
+         esac
+
+         if test -z "$pic_object" || \
+            test -z "$non_pic_object" ||
+            test "$pic_object" = none && \
+            test "$non_pic_object" = none; then
+           $echo "$modename: cannot find name of object for \`$arg'" 1>&2
+           exit $EXIT_FAILURE
+         fi
+
+         # Extract subdirectory from the argument.
+         xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
+         if test "X$xdir" = "X$arg"; then
+           xdir=
+         else
+           xdir="$xdir/"
+         fi
+
+         if test "$pic_object" != none; then
+           # Prepend the subdirectory the object is found in.
+           pic_object="$xdir$pic_object"
+
+           if test "$prev" = dlfiles; then
+             if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+               dlfiles="$dlfiles $pic_object"
+               prev=
+               continue
+             else
+               # If libtool objects are unsupported, then we need to preload.
+               prev=dlprefiles
+             fi
+           fi
+
+           # CHECK ME:  I think I busted this.  -Ossama
+           if test "$prev" = dlprefiles; then
+             # Preload the old-style object.
+             dlprefiles="$dlprefiles $pic_object"
+             prev=
+           fi
+
+           # A PIC object.
+           libobjs="$libobjs $pic_object"
+           arg="$pic_object"
+         fi
+
+         # Non-PIC object.
+         if test "$non_pic_object" != none; then
+           # Prepend the subdirectory the object is found in.
+           non_pic_object="$xdir$non_pic_object"
+
+           # A standard non-PIC object
+           non_pic_objects="$non_pic_objects $non_pic_object"
+           if test -z "$pic_object" || test "$pic_object" = none ; then
+             arg="$non_pic_object"
+           fi
+         else
+           # If the PIC object exists, use it instead.
+           # $xdir was prepended to $pic_object above.
+           non_pic_object="$pic_object"
+           non_pic_objects="$non_pic_objects $non_pic_object"
+         fi
+       else
+         # Only an error if not doing a dry-run.
+         if test -z "$run"; then
+           $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
+           exit $EXIT_FAILURE
+         else
+           # Dry-run case.
+
+           # Extract subdirectory from the argument.
+           xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
+           if test "X$xdir" = "X$arg"; then
+             xdir=
+           else
+             xdir="$xdir/"
+           fi
+
+           pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
+           non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
+           libobjs="$libobjs $pic_object"
+           non_pic_objects="$non_pic_objects $non_pic_object"
+         fi
+       fi
+       ;;
+
+      *.$libext)
+       # An archive.
+       deplibs="$deplibs $arg"
+       old_deplibs="$old_deplibs $arg"
+       continue
+       ;;
+
+      *.la)
+       # A libtool-controlled library.
+
+       if test "$prev" = dlfiles; then
+         # This library was specified with -dlopen.
+         dlfiles="$dlfiles $arg"
+         prev=
+       elif test "$prev" = dlprefiles; then
+         # The library was specified with -dlpreopen.
+         dlprefiles="$dlprefiles $arg"
+         prev=
+       else
+         deplibs="$deplibs $arg"
+       fi
+       continue
+       ;;
+
+      # Some other compiler argument.
+      *)
+       # Unknown arguments in both finalize_command and compile_command need
+       # to be aesthetically quoted because they are evaled later.
+       arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+       case $arg in
+       *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \   ]*|*]*|"")
+         arg="\"$arg\""
+         ;;
+       esac
+       ;;
+      esac # arg
+
+      # Now actually substitute the argument into the commands.
+      if test -n "$arg"; then
+       compile_command="$compile_command $arg"
+       finalize_command="$finalize_command $arg"
+      fi
+    done # argument parsing loop
+
+    if test -n "$prev"; then
+      $echo "$modename: the \`$prevarg' option requires an argument" 1>&2
+      $echo "$help" 1>&2
+      exit $EXIT_FAILURE
+    fi
+
+    if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
+      eval arg=\"$export_dynamic_flag_spec\"
+      compile_command="$compile_command $arg"
+      finalize_command="$finalize_command $arg"
+    fi
+
+    oldlibs=
+    # calculate the name of the file, without its directory
+    outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'`
+    libobjs_save="$libobjs"
+
+    if test -n "$shlibpath_var"; then
+      # get the directories listed in $shlibpath_var
+      eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
+    else
+      shlib_search_path=
+    fi
+    eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
+    eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
+
+    output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
+    if test "X$output_objdir" = "X$output"; then
+      output_objdir="$objdir"
+    else
+      output_objdir="$output_objdir/$objdir"
+    fi
+    # Create the object directory.
+    if test ! -d "$output_objdir"; then
+      $show "$mkdir $output_objdir"
+      $run $mkdir $output_objdir
+      exit_status=$?
+      if test "$exit_status" -ne 0 && test ! -d "$output_objdir"; then
+       exit $exit_status
+      fi
+    fi
+
+    # Determine the type of output
+    case $output in
+    "")
+      $echo "$modename: you must specify an output file" 1>&2
+      $echo "$help" 1>&2
+      exit $EXIT_FAILURE
+      ;;
+    *.$libext) linkmode=oldlib ;;
+    *.lo | *.$objext) linkmode=obj ;;
+    *.la) linkmode=lib ;;
+    *) linkmode=prog ;; # Anything else should be a program.
+    esac
+
+    case $host in
+    *cygwin* | *mingw* | *pw32*)
+      # don't eliminate duplications in $postdeps and $predeps
+      duplicate_compiler_generated_deps=yes
+      ;;
+    *)
+      duplicate_compiler_generated_deps=$duplicate_deps
+      ;;
+    esac
+    specialdeplibs=
+
+    libs=
+    # Find all interdependent deplibs by searching for libraries
+    # that are linked more than once (e.g. -la -lb -la)
+    for deplib in $deplibs; do
+      if test "X$duplicate_deps" = "Xyes" ; then
+       case "$libs " in
+       *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+       esac
+      fi
+      libs="$libs $deplib"
+    done
+
+    if test "$linkmode" = lib; then
+      libs="$predeps $libs $compiler_lib_search_path $postdeps"
+
+      # Compute libraries that are listed more than once in $predeps
+      # $postdeps and mark them as special (i.e., whose duplicates are
+      # not to be eliminated).
+      pre_post_deps=
+      if test "X$duplicate_compiler_generated_deps" = "Xyes" ; then
+       for pre_post_dep in $predeps $postdeps; do
+         case "$pre_post_deps " in
+         *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;;
+         esac
+         pre_post_deps="$pre_post_deps $pre_post_dep"
+       done
+      fi
+      pre_post_deps=
+    fi
+
+    deplibs=
+    newdependency_libs=
+    newlib_search_path=
+    need_relink=no # whether we're linking any uninstalled libtool libraries
+    notinst_deplibs= # not-installed libtool libraries
+    case $linkmode in
+    lib)
+       passes="conv link"
+       for file in $dlfiles $dlprefiles; do
+         case $file in
+         *.la) ;;
+         *)
+           $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2
+           exit $EXIT_FAILURE
+           ;;
+         esac
+       done
+       ;;
+    prog)
+       compile_deplibs=
+       finalize_deplibs=
+       alldeplibs=no
+       newdlfiles=
+       newdlprefiles=
+       passes="conv scan dlopen dlpreopen link"
+       ;;
+    *)  passes="conv"
+       ;;
+    esac
+    for pass in $passes; do
+      if test "$linkmode,$pass" = "lib,link" ||
+        test "$linkmode,$pass" = "prog,scan"; then
+       libs="$deplibs"
+       deplibs=
+      fi
+      if test "$linkmode" = prog; then
+       case $pass in
+       dlopen) libs="$dlfiles" ;;
+       dlpreopen) libs="$dlprefiles" ;;
+       link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
+       esac
+      fi
+      if test "$pass" = dlopen; then
+       # Collect dlpreopened libraries
+       save_deplibs="$deplibs"
+       deplibs=
+      fi
+      for deplib in $libs; do
+       lib=
+       found=no
+       case $deplib in
+       -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
+         if test "$linkmode,$pass" = "prog,link"; then
+           compile_deplibs="$deplib $compile_deplibs"
+           finalize_deplibs="$deplib $finalize_deplibs"
+         else
+           compiler_flags="$compiler_flags $deplib"
+         fi
+         continue
+         ;;
+       -l*)
+         if test "$linkmode" != lib && test "$linkmode" != prog; then
+           $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2
+           continue
+         fi
+         name=`$echo "X$deplib" | $Xsed -e 's/^-l//'`
+         for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do
+           for search_ext in .la $std_shrext .so .a; do
+             # Search the libtool library
+             lib="$searchdir/lib${name}${search_ext}"
+             if test -f "$lib"; then
+               if test "$search_ext" = ".la"; then
+                 found=yes
+               else
+                 found=no
+               fi
+               break 2
+             fi
+           done
+         done
+         if test "$found" != yes; then
+           # deplib doesn't seem to be a libtool library
+           if test "$linkmode,$pass" = "prog,link"; then
+             compile_deplibs="$deplib $compile_deplibs"
+             finalize_deplibs="$deplib $finalize_deplibs"
+           else
+             deplibs="$deplib $deplibs"
+             test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
+           fi
+           continue
+         else # deplib is a libtool library
+           # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
+           # We need to do some special things here, and not later.
+           if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+             case " $predeps $postdeps " in
+             *" $deplib "*)
+               if (${SED} -e '2q' $lib |
+                    grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+                 library_names=
+                 old_library=
+                 case $lib in
+                 */* | *\\*) . $lib ;;
+                 *) . ./$lib ;;
+                 esac
+                 for l in $old_library $library_names; do
+                   ll="$l"
+                 done
+                 if test "X$ll" = "X$old_library" ; then # only static version available
+                   found=no
+                   ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
+                   test "X$ladir" = "X$lib" && ladir="."
+                   lib=$ladir/$old_library
+                   if test "$linkmode,$pass" = "prog,link"; then
+                     compile_deplibs="$deplib $compile_deplibs"
+                     finalize_deplibs="$deplib $finalize_deplibs"
+                   else
+                     deplibs="$deplib $deplibs"
+                     test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
+                   fi
+                   continue
+                 fi
+               fi
+               ;;
+             *) ;;
+             esac
+           fi
+         fi
+         ;; # -l
+       -L*)
+         case $linkmode in
+         lib)
+           deplibs="$deplib $deplibs"
+           test "$pass" = conv && continue
+           newdependency_libs="$deplib $newdependency_libs"
+           newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
+           ;;
+         prog)
+           if test "$pass" = conv; then
+             deplibs="$deplib $deplibs"
+             continue
+           fi
+           if test "$pass" = scan; then
+             deplibs="$deplib $deplibs"
+           else
+             compile_deplibs="$deplib $compile_deplibs"
+             finalize_deplibs="$deplib $finalize_deplibs"
+           fi
+           newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
+           ;;
+         *)
+           $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2
+           ;;
+         esac # linkmode
+         continue
+         ;; # -L
+       -R*)
+         if test "$pass" = link; then
+           dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'`
+           # Make sure the xrpath contains only unique directories.
+           case "$xrpath " in
+           *" $dir "*) ;;
+           *) xrpath="$xrpath $dir" ;;
+           esac
+         fi
+         deplibs="$deplib $deplibs"
+         continue
+         ;;
+       *.la) lib="$deplib" ;;
+       *.$libext)
+         if test "$pass" = conv; then
+           deplibs="$deplib $deplibs"
+           continue
+         fi
+         case $linkmode in
+         lib)
+           valid_a_lib=no
+           case $deplibs_check_method in
+             match_pattern*)
+               set dummy $deplibs_check_method
+               match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
+               if eval $echo \"$deplib\" 2>/dev/null \
+                   | $SED 10q \
+                   | $EGREP "$match_pattern_regex" > /dev/null; then
+                 valid_a_lib=yes
+               fi
+               ;;
+             pass_all)
+               valid_a_lib=yes
+               ;;
+            esac
+           if test "$valid_a_lib" != yes; then
+             $echo
+             $echo "*** Warning: Trying to link with static lib archive $deplib."
+             $echo "*** I have the capability to make that library automatically link in when"
+             $echo "*** you link to this library.  But I can only do this if you have a"
+             $echo "*** shared version of the library, which you do not appear to have"
+             $echo "*** because the file extensions .$libext of this argument makes me believe"
+             $echo "*** that it is just a static archive that I should not used here."
+           else
+             $echo
+             $echo "*** Warning: Linking the shared library $output against the"
+             $echo "*** static library $deplib is not portable!"
+             deplibs="$deplib $deplibs"
+           fi
+           continue
+           ;;
+         prog)
+           if test "$pass" != link; then
+             deplibs="$deplib $deplibs"
+           else
+             compile_deplibs="$deplib $compile_deplibs"
+             finalize_deplibs="$deplib $finalize_deplibs"
+           fi
+           continue
+           ;;
+         esac # linkmode
+         ;; # *.$libext
+       *.lo | *.$objext)
+         if test "$pass" = conv; then
+           deplibs="$deplib $deplibs"
+         elif test "$linkmode" = prog; then
+           if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
+             # If there is no dlopen support or we're linking statically,
+             # we need to preload.
+             newdlprefiles="$newdlprefiles $deplib"
+             compile_deplibs="$deplib $compile_deplibs"
+             finalize_deplibs="$deplib $finalize_deplibs"
+           else
+             newdlfiles="$newdlfiles $deplib"
+           fi
+         fi
+         continue
+         ;;
+       %DEPLIBS%)
+         alldeplibs=yes
+         continue
+         ;;
+       esac # case $deplib
+       if test "$found" = yes || test -f "$lib"; then :
+       else
+         $echo "$modename: cannot find the library \`$lib' or unhandled argument \`$deplib'" 1>&2
+         exit $EXIT_FAILURE
+       fi
+
+       # Check to see that this really is a libtool archive.
+       if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+       else
+         $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+         exit $EXIT_FAILURE
+       fi
+
+       ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
+       test "X$ladir" = "X$lib" && ladir="."
+
+       dlname=
+       dlopen=
+       dlpreopen=
+       libdir=
+       library_names=
+       old_library=
+       # If the library was installed with an old release of libtool,
+       # it will not redefine variables installed, or shouldnotlink
+       installed=yes
+       shouldnotlink=no
+       avoidtemprpath=
+
+
+       # Read the .la file
+       case $lib in
+       */* | *\\*) . $lib ;;
+       *) . ./$lib ;;
+       esac
+
+       if test "$linkmode,$pass" = "lib,link" ||
+          test "$linkmode,$pass" = "prog,scan" ||
+          { test "$linkmode" != prog && test "$linkmode" != lib; }; then
+         test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
+         test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
+       fi
+
+       if test "$pass" = conv; then
+         # Only check for convenience libraries
+         deplibs="$lib $deplibs"
+         if test -z "$libdir"; then
+           if test -z "$old_library"; then
+             $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
+             exit $EXIT_FAILURE
+           fi
+           # It is a libtool convenience library, so add in its objects.
+           convenience="$convenience $ladir/$objdir/$old_library"
+           old_convenience="$old_convenience $ladir/$objdir/$old_library"
+           tmp_libs=
+           for deplib in $dependency_libs; do
+             deplibs="$deplib $deplibs"
+              if test "X$duplicate_deps" = "Xyes" ; then
+               case "$tmp_libs " in
+               *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+               esac
+              fi
+             tmp_libs="$tmp_libs $deplib"
+           done
+         elif test "$linkmode" != prog && test "$linkmode" != lib; then
+           $echo "$modename: \`$lib' is not a convenience library" 1>&2
+           exit $EXIT_FAILURE
+         fi
+         continue
+       fi # $pass = conv
+
+
+       # Get the name of the library we link against.
+       linklib=
+       for l in $old_library $library_names; do
+         linklib="$l"
+       done
+       if test -z "$linklib"; then
+         $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
+         exit $EXIT_FAILURE
+       fi
+
+       # This library was specified with -dlopen.
+       if test "$pass" = dlopen; then
+         if test -z "$libdir"; then
+           $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2
+           exit $EXIT_FAILURE
+         fi
+         if test -z "$dlname" ||
+            test "$dlopen_support" != yes ||
+            test "$build_libtool_libs" = no; then
+           # If there is no dlname, no dlopen support or we're linking
+           # statically, we need to preload.  We also need to preload any
+           # dependent libraries so libltdl's deplib preloader doesn't
+           # bomb out in the load deplibs phase.
+           dlprefiles="$dlprefiles $lib $dependency_libs"
+         else
+           newdlfiles="$newdlfiles $lib"
+         fi
+         continue
+       fi # $pass = dlopen
+
+       # We need an absolute path.
+       case $ladir in
+       [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
+       *)
+         abs_ladir=`cd "$ladir" && pwd`
+         if test -z "$abs_ladir"; then
+           $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2
+           $echo "$modename: passing it literally to the linker, although it might fail" 1>&2
+           abs_ladir="$ladir"
+         fi
+         ;;
+       esac
+       laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
+
+       # Find the relevant object directory and library name.
+       if test "X$installed" = Xyes; then
+         if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+           $echo "$modename: warning: library \`$lib' was moved." 1>&2
+           dir="$ladir"
+           absdir="$abs_ladir"
+           libdir="$abs_ladir"
+         else
+           dir="$libdir"
+           absdir="$libdir"
+         fi
+         test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
+       else
+         if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+           dir="$ladir"
+           absdir="$abs_ladir"
+           # Remove this search path later
+           notinst_path="$notinst_path $abs_ladir"
+         else
+           dir="$ladir/$objdir"
+           absdir="$abs_ladir/$objdir"
+           # Remove this search path later
+           notinst_path="$notinst_path $abs_ladir"
+         fi
+       fi # $installed = yes
+       name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
+
+       # This library was specified with -dlpreopen.
+       if test "$pass" = dlpreopen; then
+         if test -z "$libdir"; then
+           $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2
+           exit $EXIT_FAILURE
+         fi
+         # Prefer using a static library (so that no silly _DYNAMIC symbols
+         # are required to link).
+         if test -n "$old_library"; then
+           newdlprefiles="$newdlprefiles $dir/$old_library"
+         # Otherwise, use the dlname, so that lt_dlopen finds it.
+         elif test -n "$dlname"; then
+           newdlprefiles="$newdlprefiles $dir/$dlname"
+         else
+           newdlprefiles="$newdlprefiles $dir/$linklib"
+         fi
+       fi # $pass = dlpreopen
+
+       if test -z "$libdir"; then
+         # Link the convenience library
+         if test "$linkmode" = lib; then
+           deplibs="$dir/$old_library $deplibs"
+         elif test "$linkmode,$pass" = "prog,link"; then
+           compile_deplibs="$dir/$old_library $compile_deplibs"
+           finalize_deplibs="$dir/$old_library $finalize_deplibs"
+         else
+           deplibs="$lib $deplibs" # used for prog,scan pass
+         fi
+         continue
+       fi
+
+
+       if test "$linkmode" = prog && test "$pass" != link; then
+         newlib_search_path="$newlib_search_path $ladir"
+         deplibs="$lib $deplibs"
+
+         linkalldeplibs=no
+         if test "$link_all_deplibs" != no || test -z "$library_names" ||
+            test "$build_libtool_libs" = no; then
+           linkalldeplibs=yes
+         fi
+
+         tmp_libs=
+         for deplib in $dependency_libs; do
+           case $deplib in
+           -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test
+           esac
+           # Need to link against all dependency_libs?
+           if test "$linkalldeplibs" = yes; then
+             deplibs="$deplib $deplibs"
+           else
+             # Need to hardcode shared library paths
+             # or/and link against static libraries
+             newdependency_libs="$deplib $newdependency_libs"
+           fi
+           if test "X$duplicate_deps" = "Xyes" ; then
+             case "$tmp_libs " in
+             *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+             esac
+           fi
+           tmp_libs="$tmp_libs $deplib"
+         done # for deplib
+         continue
+       fi # $linkmode = prog...
+
+       if test "$linkmode,$pass" = "prog,link"; then
+         if test -n "$library_names" &&
+            { { test "$prefer_static_libs" = no ||
+                test "$prefer_static_libs,$installed" = "built,yes"; } ||
+              test -z "$old_library"; }; then
+           # We need to hardcode the library path
+           if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
+             # Make sure the rpath contains only unique directories.
+             case "$temp_rpath " in
+             *" $dir "*) ;;
+             *" $absdir "*) ;;
+             *) temp_rpath="$temp_rpath $absdir" ;;
+             esac
+           fi
+
+           # Hardcode the library path.
+           # Skip directories that are in the system default run-time
+           # search path.
+           case " $sys_lib_dlsearch_path " in
+           *" $absdir "*) ;;
+           *)
+             case "$compile_rpath " in
+             *" $absdir "*) ;;
+             *) compile_rpath="$compile_rpath $absdir"
+             esac
+             ;;
+           esac
+           case " $sys_lib_dlsearch_path " in
+           *" $libdir "*) ;;
+           *)
+             case "$finalize_rpath " in
+             *" $libdir "*) ;;
+             *) finalize_rpath="$finalize_rpath $libdir"
+             esac
+             ;;
+           esac
+         fi # $linkmode,$pass = prog,link...
+
+         if test "$alldeplibs" = yes &&
+            { test "$deplibs_check_method" = pass_all ||
+              { test "$build_libtool_libs" = yes &&
+                test -n "$library_names"; }; }; then
+           # We only need to search for static libraries
+           continue
+         fi
+       fi
+
+       link_static=no # Whether the deplib will be linked statically
+       use_static_libs=$prefer_static_libs
+       if test "$use_static_libs" = built && test "$installed" = yes ; then
+         use_static_libs=no
+       fi
+       if test -n "$library_names" &&
+          { test "$use_static_libs" = no || test -z "$old_library"; }; then
+         if test "$installed" = no; then
+           notinst_deplibs="$notinst_deplibs $lib"
+           need_relink=yes
+         fi
+         # This is a shared library
+
+         # Warn about portability, can't link against -module's on
+         # some systems (darwin)
+         if test "$shouldnotlink" = yes && test "$pass" = link ; then
+           $echo
+           if test "$linkmode" = prog; then
+             $echo "*** Warning: Linking the executable $output against the loadable module"
+           else
+             $echo "*** Warning: Linking the shared library $output against the loadable module"
+           fi
+           $echo "*** $linklib is not portable!"
+         fi
+         if test "$linkmode" = lib &&
+            test "$hardcode_into_libs" = yes; then
+           # Hardcode the library path.
+           # Skip directories that are in the system default run-time
+           # search path.
+           case " $sys_lib_dlsearch_path " in
+           *" $absdir "*) ;;
+           *)
+             case "$compile_rpath " in
+             *" $absdir "*) ;;
+             *) compile_rpath="$compile_rpath $absdir"
+             esac
+             ;;
+           esac
+           case " $sys_lib_dlsearch_path " in
+           *" $libdir "*) ;;
+           *)
+             case "$finalize_rpath " in
+             *" $libdir "*) ;;
+             *) finalize_rpath="$finalize_rpath $libdir"
+             esac
+             ;;
+           esac
+         fi
+
+         if test -n "$old_archive_from_expsyms_cmds"; then
+           # figure out the soname
+           set dummy $library_names
+           realname="$2"
+           shift; shift
+           libname=`eval \\$echo \"$libname_spec\"`
+           # use dlname if we got it. it's perfectly good, no?
+           if test -n "$dlname"; then
+             soname="$dlname"
+           elif test -n "$soname_spec"; then
+             # bleh windows
+             case $host in
+             *cygwin* | mingw*)
+               major=`expr $current - $age`
+               versuffix="-$major"
+               ;;
+             esac
+             eval soname=\"$soname_spec\"
+           else
+             soname="$realname"
+           fi
+
+           # Make a new name for the extract_expsyms_cmds to use
+           soroot="$soname"
+           soname=`$echo $soroot | ${SED} -e 's/^.*\///'`
+           newlib="libimp-`$echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a"
+
+           # If the library has no export list, then create one now
+           if test -f "$output_objdir/$soname-def"; then :
+           else
+             $show "extracting exported symbol list from \`$soname'"
+             save_ifs="$IFS"; IFS='~'
+             cmds=$extract_expsyms_cmds
+             for cmd in $cmds; do
+               IFS="$save_ifs"
+               eval cmd=\"$cmd\"
+               $show "$cmd"
+               $run eval "$cmd" || exit $?
+             done
+             IFS="$save_ifs"
+           fi
+
+           # Create $newlib
+           if test -f "$output_objdir/$newlib"; then :; else
+             $show "generating import library for \`$soname'"
+             save_ifs="$IFS"; IFS='~'
+             cmds=$old_archive_from_expsyms_cmds
+             for cmd in $cmds; do
+               IFS="$save_ifs"
+               eval cmd=\"$cmd\"
+               $show "$cmd"
+               $run eval "$cmd" || exit $?
+             done
+             IFS="$save_ifs"
+           fi
+           # make sure the library variables are pointing to the new library
+           dir=$output_objdir
+           linklib=$newlib
+         fi # test -n "$old_archive_from_expsyms_cmds"
+
+         if test "$linkmode" = prog || test "$mode" != relink; then
+           add_shlibpath=
+           add_dir=
+           add=
+           lib_linked=yes
+           case $hardcode_action in
+           immediate | unsupported)
+             if test "$hardcode_direct" = no; then
+               add="$dir/$linklib"
+               case $host in
+                 *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
+                 *-*-sysv4*uw2*) add_dir="-L$dir" ;;
+                 *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
+                   *-*-unixware7*) add_dir="-L$dir" ;;
+                 *-*-darwin* )
+                   # if the lib is a module then we can not link against
+                   # it, someone is ignoring the new warnings I added
+                   if /usr/bin/file -L $add 2> /dev/null |
+                      $EGREP ": [^:]* bundle" >/dev/null ; then
+                     $echo "** Warning, lib $linklib is a module, not a shared library"
+                     if test -z "$old_library" ; then
+                       $echo
+                       $echo "** And there doesn't seem to be a static archive available"
+                       $echo "** The link will probably fail, sorry"
+                     else
+                       add="$dir/$old_library"
+                     fi
+                   fi
+               esac
+             elif test "$hardcode_minus_L" = no; then
+               case $host in
+               *-*-sunos*) add_shlibpath="$dir" ;;
+               esac
+               add_dir="-L$dir"
+               add="-l$name"
+             elif test "$hardcode_shlibpath_var" = no; then
+               add_shlibpath="$dir"
+               add="-l$name"
+             else
+               lib_linked=no
+             fi
+             ;;
+           relink)
+             if test "$hardcode_direct" = yes; then
+               add="$dir/$linklib"
+             elif test "$hardcode_minus_L" = yes; then
+               add_dir="-L$dir"
+               # Try looking first in the location we're being installed to.
+               if test -n "$inst_prefix_dir"; then
+                 case $libdir in
+                   [\\/]*)
+                     add_dir="$add_dir -L$inst_prefix_dir$libdir"
+                     ;;
+                 esac
+               fi
+               add="-l$name"
+             elif test "$hardcode_shlibpath_var" = yes; then
+               add_shlibpath="$dir"
+               add="-l$name"
+             else
+               lib_linked=no
+             fi
+             ;;
+           *) lib_linked=no ;;
+           esac
+
+           if test "$lib_linked" != yes; then
+             $echo "$modename: configuration error: unsupported hardcode properties"
+             exit $EXIT_FAILURE
+           fi
+
+           if test -n "$add_shlibpath"; then
+             case :$compile_shlibpath: in
+             *":$add_shlibpath:"*) ;;
+             *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
+             esac
+           fi
+           if test "$linkmode" = prog; then
+             test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
+             test -n "$add" && compile_deplibs="$add $compile_deplibs"
+           else
+             test -n "$add_dir" && deplibs="$add_dir $deplibs"
+             test -n "$add" && deplibs="$add $deplibs"
+             if test "$hardcode_direct" != yes && \
+                test "$hardcode_minus_L" != yes && \
+                test "$hardcode_shlibpath_var" = yes; then
+               case :$finalize_shlibpath: in
+               *":$libdir:"*) ;;
+               *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
+               esac
+             fi
+           fi
+         fi
+
+         if test "$linkmode" = prog || test "$mode" = relink; then
+           add_shlibpath=
+           add_dir=
+           add=
+           # Finalize command for both is simple: just hardcode it.
+           if test "$hardcode_direct" = yes; then
+             add="$libdir/$linklib"
+           elif test "$hardcode_minus_L" = yes; then
+             add_dir="-L$libdir"
+             add="-l$name"
+           elif test "$hardcode_shlibpath_var" = yes; then
+             case :$finalize_shlibpath: in
+             *":$libdir:"*) ;;
+             *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
+             esac
+             add="-l$name"
+           elif test "$hardcode_automatic" = yes; then
+             if test -n "$inst_prefix_dir" &&
+                test -f "$inst_prefix_dir$libdir/$linklib" ; then
+               add="$inst_prefix_dir$libdir/$linklib"
+             else
+               add="$libdir/$linklib"
+             fi
+           else
+             # We cannot seem to hardcode it, guess we'll fake it.
+             add_dir="-L$libdir"
+             # Try looking first in the location we're being installed to.
+             if test -n "$inst_prefix_dir"; then
+               case $libdir in
+                 [\\/]*)
+                   add_dir="$add_dir -L$inst_prefix_dir$libdir"
+                   ;;
+               esac
+             fi
+             add="-l$name"
+           fi
+
+           if test "$linkmode" = prog; then
+             test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
+             test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
+           else
+             test -n "$add_dir" && deplibs="$add_dir $deplibs"
+             test -n "$add" && deplibs="$add $deplibs"
+           fi
+         fi
+       elif test "$linkmode" = prog; then
+         # Here we assume that one of hardcode_direct or hardcode_minus_L
+         # is not unsupported.  This is valid on all known static and
+         # shared platforms.
+         if test "$hardcode_direct" != unsupported; then
+           test -n "$old_library" && linklib="$old_library"
+           compile_deplibs="$dir/$linklib $compile_deplibs"
+           finalize_deplibs="$dir/$linklib $finalize_deplibs"
+         else
+           compile_deplibs="-l$name -L$dir $compile_deplibs"
+           finalize_deplibs="-l$name -L$dir $finalize_deplibs"
+         fi
+       elif test "$build_libtool_libs" = yes; then
+         # Not a shared library
+         if test "$deplibs_check_method" != pass_all; then
+           # We're trying link a shared library against a static one
+           # but the system doesn't support it.
+
+           # Just print a warning and add the library to dependency_libs so
+           # that the program can be linked against the static library.
+           $echo
+           $echo "*** Warning: This system can not link to static lib archive $lib."
+           $echo "*** I have the capability to make that library automatically link in when"
+           $echo "*** you link to this library.  But I can only do this if you have a"
+           $echo "*** shared version of the library, which you do not appear to have."
+           if test "$module" = yes; then
+             $echo "*** But as you try to build a module library, libtool will still create "
+             $echo "*** a static module, that should work as long as the dlopening application"
+             $echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
+             if test -z "$global_symbol_pipe"; then
+               $echo
+               $echo "*** However, this would only work if libtool was able to extract symbol"
+               $echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+               $echo "*** not find such a program.  So, this module is probably useless."
+               $echo "*** \`nm' from GNU binutils and a full rebuild may help."
+             fi
+             if test "$build_old_libs" = no; then
+               build_libtool_libs=module
+               build_old_libs=yes
+             else
+               build_libtool_libs=no
+             fi
+           fi
+         else
+           deplibs="$dir/$old_library $deplibs"
+           link_static=yes
+         fi
+       fi # link shared/static library?
+
+       if test "$linkmode" = lib; then
+         if test -n "$dependency_libs" &&
+            { test "$hardcode_into_libs" != yes ||
+              test "$build_old_libs" = yes ||
+              test "$link_static" = yes; }; then
+           # Extract -R from dependency_libs
+           temp_deplibs=
+           for libdir in $dependency_libs; do
+             case $libdir in
+             -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'`
+                  case " $xrpath " in
+                  *" $temp_xrpath "*) ;;
+                  *) xrpath="$xrpath $temp_xrpath";;
+                  esac;;
+             *) temp_deplibs="$temp_deplibs $libdir";;
+             esac
+           done
+           dependency_libs="$temp_deplibs"
+         fi
+
+         newlib_search_path="$newlib_search_path $absdir"
+         # Link against this library
+         test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
+         # ... and its dependency_libs
+         tmp_libs=
+         for deplib in $dependency_libs; do
+           newdependency_libs="$deplib $newdependency_libs"
+           if test "X$duplicate_deps" = "Xyes" ; then
+             case "$tmp_libs " in
+             *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+             esac
+           fi
+           tmp_libs="$tmp_libs $deplib"
+         done
+
+         if test "$link_all_deplibs" != no; then
+           # Add the search paths of all dependency libraries
+           for deplib in $dependency_libs; do
+             case $deplib in
+             -L*) path="$deplib" ;;
+             *.la)
+               dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'`
+               test "X$dir" = "X$deplib" && dir="."
+               # We need an absolute path.
+               case $dir in
+               [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
+               *)
+                 absdir=`cd "$dir" && pwd`
+                 if test -z "$absdir"; then
+                   $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2
+                   absdir="$dir"
+                 fi
+                 ;;
+               esac
+               if grep "^installed=no" $deplib > /dev/null; then
+                 path="$absdir/$objdir"
+               else
+                 eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+                 if test -z "$libdir"; then
+                   $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
+                   exit $EXIT_FAILURE
+                 fi
+                 if test "$absdir" != "$libdir"; then
+                   $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2
+                 fi
+                 path="$absdir"
+               fi
+               depdepl=
+               case $host in
+               *-*-darwin*)
+                 # we do not want to link against static libs,
+                 # but need to link against shared
+                 eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
+                 if test -n "$deplibrary_names" ; then
+                   for tmp in $deplibrary_names ; do
+                     depdepl=$tmp
+                   done
+                   if test -f "$path/$depdepl" ; then
+                     depdepl="$path/$depdepl"
+                   fi
+                   # do not add paths which are already there
+                   case " $newlib_search_path " in
+                   *" $path "*) ;;
+                   *) newlib_search_path="$newlib_search_path $path";;
+                   esac
+                 fi
+                 path=""
+                 ;;
+               *)
+                 path="-L$path"
+                 ;;
+               esac
+               ;;
+             -l*)
+               case $host in
+               *-*-darwin*)
+                 # Again, we only want to link against shared libraries
+                 eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"`
+                 for tmp in $newlib_search_path ; do
+                   if test -f "$tmp/lib$tmp_libs.dylib" ; then
+                     eval depdepl="$tmp/lib$tmp_libs.dylib"
+                     break
+                   fi
+                 done
+                 path=""
+                 ;;
+               *) continue ;;
+               esac
+               ;;
+             *) continue ;;
+             esac
+             case " $deplibs " in
+             *" $path "*) ;;
+             *) deplibs="$path $deplibs" ;;
+             esac
+             case " $deplibs " in
+             *" $depdepl "*) ;;
+             *) deplibs="$depdepl $deplibs" ;;
+             esac
+           done
+         fi # link_all_deplibs != no
+       fi # linkmode = lib
+      done # for deplib in $libs
+      dependency_libs="$newdependency_libs"
+      if test "$pass" = dlpreopen; then
+       # Link the dlpreopened libraries before other libraries
+       for deplib in $save_deplibs; do
+         deplibs="$deplib $deplibs"
+       done
+      fi
+      if test "$pass" != dlopen; then
+       if test "$pass" != conv; then
+         # Make sure lib_search_path contains only unique directories.
+         lib_search_path=
+         for dir in $newlib_search_path; do
+           case "$lib_search_path " in
+           *" $dir "*) ;;
+           *) lib_search_path="$lib_search_path $dir" ;;
+           esac
+         done
+         newlib_search_path=
+       fi
+
+       if test "$linkmode,$pass" != "prog,link"; then
+         vars="deplibs"
+       else
+         vars="compile_deplibs finalize_deplibs"
+       fi
+       for var in $vars dependency_libs; do
+         # Add libraries to $var in reverse order
+         eval tmp_libs=\"\$$var\"
+         new_libs=
+         for deplib in $tmp_libs; do
+           # FIXME: Pedantically, this is the right thing to do, so
+           #        that some nasty dependency loop isn't accidentally
+           #        broken:
+           #new_libs="$deplib $new_libs"
+           # Pragmatically, this seems to cause very few problems in
+           # practice:
+           case $deplib in
+           -L*) new_libs="$deplib $new_libs" ;;
+           -R*) ;;
+           *)
+             # And here is the reason: when a library appears more
+             # than once as an explicit dependence of a library, or
+             # is implicitly linked in more than once by the
+             # compiler, it is considered special, and multiple
+             # occurrences thereof are not removed.  Compare this
+             # with having the same library being listed as a
+             # dependency of multiple other libraries: in this case,
+             # we know (pedantically, we assume) the library does not
+             # need to be listed more than once, so we keep only the
+             # last copy.  This is not always right, but it is rare
+             # enough that we require users that really mean to play
+             # such unportable linking tricks to link the library
+             # using -Wl,-lname, so that libtool does not consider it
+             # for duplicate removal.
+             case " $specialdeplibs " in
+             *" $deplib "*) new_libs="$deplib $new_libs" ;;
+             *)
+               case " $new_libs " in
+               *" $deplib "*) ;;
+               *) new_libs="$deplib $new_libs" ;;
+               esac
+               ;;
+             esac
+             ;;
+           esac
+         done
+         tmp_libs=
+         for deplib in $new_libs; do
+           case $deplib in
+           -L*)
+             case " $tmp_libs " in
+             *" $deplib "*) ;;
+             *) tmp_libs="$tmp_libs $deplib" ;;
+             esac
+             ;;
+           *) tmp_libs="$tmp_libs $deplib" ;;
+           esac
+         done
+         eval $var=\"$tmp_libs\"
+       done # for var
+      fi
+      # Last step: remove runtime libs from dependency_libs
+      # (they stay in deplibs)
+      tmp_libs=
+      for i in $dependency_libs ; do
+       case " $predeps $postdeps $compiler_lib_search_path " in
+       *" $i "*)
+         i=""
+         ;;
+       esac
+       if test -n "$i" ; then
+         tmp_libs="$tmp_libs $i"
+       fi
+      done
+      dependency_libs=$tmp_libs
+    done # for pass
+    if test "$linkmode" = prog; then
+      dlfiles="$newdlfiles"
+      dlprefiles="$newdlprefiles"
+    fi
+
+    case $linkmode in
+    oldlib)
+      if test -n "$deplibs"; then
+       $echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2
+      fi
+
+      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+       $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2
+      fi
+
+      if test -n "$rpath"; then
+       $echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2
+      fi
+
+      if test -n "$xrpath"; then
+       $echo "$modename: warning: \`-R' is ignored for archives" 1>&2
+      fi
+
+      if test -n "$vinfo"; then
+       $echo "$modename: warning: \`-version-info/-version-number' is ignored for archives" 1>&2
+      fi
+
+      if test -n "$release"; then
+       $echo "$modename: warning: \`-release' is ignored for archives" 1>&2
+      fi
+
+      if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
+       $echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2
+      fi
+
+      # Now set the variables for building old libraries.
+      build_libtool_libs=no
+      oldlibs="$output"
+      objs="$objs$old_deplibs"
+      ;;
+
+    lib)
+      # Make sure we only generate libraries of the form `libNAME.la'.
+      case $outputname in
+      lib*)
+       name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
+       eval shared_ext=\"$shrext_cmds\"
+       eval libname=\"$libname_spec\"
+       ;;
+      *)
+       if test "$module" = no; then
+         $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2
+         $echo "$help" 1>&2
+         exit $EXIT_FAILURE
+       fi
+       if test "$need_lib_prefix" != no; then
+         # Add the "lib" prefix for modules if required
+         name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
+         eval shared_ext=\"$shrext_cmds\"
+         eval libname=\"$libname_spec\"
+       else
+         libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
+       fi
+       ;;
+      esac
+
+      if test -n "$objs"; then
+       if test "$deplibs_check_method" != pass_all; then
+         $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1
+         exit $EXIT_FAILURE
+       else
+         $echo
+         $echo "*** Warning: Linking the shared library $output against the non-libtool"
+         $echo "*** objects $objs is not portable!"
+         libobjs="$libobjs $objs"
+       fi
+      fi
+
+      if test "$dlself" != no; then
+       $echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2
+      fi
+
+      set dummy $rpath
+      if test "$#" -gt 2; then
+       $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2
+      fi
+      install_libdir="$2"
+
+      oldlibs=
+      if test -z "$rpath"; then
+       if test "$build_libtool_libs" = yes; then
+         # Building a libtool convenience library.
+         # Some compilers have problems with a `.al' extension so
+         # convenience libraries should have the same extension an
+         # archive normally would.
+         oldlibs="$output_objdir/$libname.$libext $oldlibs"
+         build_libtool_libs=convenience
+         build_old_libs=yes
+       fi
+
+       if test -n "$vinfo"; then
+         $echo "$modename: warning: \`-version-info/-version-number' is ignored for convenience libraries" 1>&2
+       fi
+
+       if test -n "$release"; then
+         $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2
+       fi
+      else
+
+       # Parse the version information argument.
+       save_ifs="$IFS"; IFS=':'
+       set dummy $vinfo 0 0 0
+       IFS="$save_ifs"
+
+       if test -n "$8"; then
+         $echo "$modename: too many parameters to \`-version-info'" 1>&2
+         $echo "$help" 1>&2
+         exit $EXIT_FAILURE
+       fi
+
+       # convert absolute version numbers to libtool ages
+       # this retains compatibility with .la files and attempts
+       # to make the code below a bit more comprehensible
+
+       case $vinfo_number in
+       yes)
+         number_major="$2"
+         number_minor="$3"
+         number_revision="$4"
+         #
+         # There are really only two kinds -- those that
+         # use the current revision as the major version
+         # and those that subtract age and use age as
+         # a minor version.  But, then there is irix
+         # which has an extra 1 added just for fun
+         #
+         case $version_type in
+         darwin|linux|osf|windows|none)
+           current=`expr $number_major + $number_minor`
+           age="$number_minor"
+           revision="$number_revision"
+           ;;
+         freebsd-aout|freebsd-elf|sunos)
+           current="$number_major"
+           revision="$number_minor"
+           age="0"
+           ;;
+         irix|nonstopux)
+           current=`expr $number_major + $number_minor`
+           age="$number_minor"
+           revision="$number_minor"
+           lt_irix_increment=no
+           ;;
+         esac
+         ;;
+       no)
+         current="$2"
+         revision="$3"
+         age="$4"
+         ;;
+       esac
+
+       # Check that each of the things are valid numbers.
+       case $current in
+       0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+       *)
+         $echo "$modename: CURRENT \`$current' must be a nonnegative integer" 1>&2
+         $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+         exit $EXIT_FAILURE
+         ;;
+       esac
+
+       case $revision in
+       0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+       *)
+         $echo "$modename: REVISION \`$revision' must be a nonnegative integer" 1>&2
+         $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+         exit $EXIT_FAILURE
+         ;;
+       esac
+
+       case $age in
+       0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+       *)
+         $echo "$modename: AGE \`$age' must be a nonnegative integer" 1>&2
+         $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+         exit $EXIT_FAILURE
+         ;;
+       esac
+
+       if test "$age" -gt "$current"; then
+         $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
+         $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+         exit $EXIT_FAILURE
+       fi
+
+       # Calculate the version variables.
+       major=
+       versuffix=
+       verstring=
+       case $version_type in
+       none) ;;
+
+       darwin)
+         # Like Linux, but with the current version available in
+         # verstring for coding it into the library header
+         major=.`expr $current - $age`
+         versuffix="$major.$age.$revision"
+         # Darwin ld doesn't like 0 for these options...
+         minor_current=`expr $current + 1`
+         xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
+         verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
+         ;;
+
+       freebsd-aout)
+         major=".$current"
+         versuffix=".$current.$revision";
+         ;;
+
+       freebsd-elf)
+         major=".$current"
+         versuffix=".$current";
+         ;;
+
+       irix | nonstopux)
+         if test "X$lt_irix_increment" = "Xno"; then
+           major=`expr $current - $age`
+         else
+           major=`expr $current - $age + 1`
+         fi
+         case $version_type in
+           nonstopux) verstring_prefix=nonstopux ;;
+           *)         verstring_prefix=sgi ;;
+         esac
+         verstring="$verstring_prefix$major.$revision"
+
+         # Add in all the interfaces that we are compatible with.
+         loop=$revision
+         while test "$loop" -ne 0; do
+           iface=`expr $revision - $loop`
+           loop=`expr $loop - 1`
+           verstring="$verstring_prefix$major.$iface:$verstring"
+         done
+
+         # Before this point, $major must not contain `.'.
+         major=.$major
+         versuffix="$major.$revision"
+         ;;
+
+       linux)
+         major=.`expr $current - $age`
+         versuffix="$major.$age.$revision"
+         ;;
+
+       osf)
+         major=.`expr $current - $age`
+         versuffix=".$current.$age.$revision"
+         verstring="$current.$age.$revision"
+
+         # Add in all the interfaces that we are compatible with.
+         loop=$age
+         while test "$loop" -ne 0; do
+           iface=`expr $current - $loop`
+           loop=`expr $loop - 1`
+           verstring="$verstring:${iface}.0"
+         done
+
+         # Make executables depend on our current version.
+         verstring="$verstring:${current}.0"
+         ;;
+
+       sunos)
+         major=".$current"
+         versuffix=".$current.$revision"
+         ;;
+
+       windows)
+         # Use '-' rather than '.', since we only want one
+         # extension on DOS 8.3 filesystems.
+         major=`expr $current - $age`
+         versuffix="-$major"
+         ;;
+
+       *)
+         $echo "$modename: unknown library version type \`$version_type'" 1>&2
+         $echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
+         exit $EXIT_FAILURE
+         ;;
+       esac
+
+       # Clear the version info if we defaulted, and they specified a release.
+       if test -z "$vinfo" && test -n "$release"; then
+         major=
+         case $version_type in
+         darwin)
+           # we can't check for "0.0" in archive_cmds due to quoting
+           # problems, so we reset it completely
+           verstring=
+           ;;
+         *)
+           verstring="0.0"
+           ;;
+         esac
+         if test "$need_version" = no; then
+           versuffix=
+         else
+           versuffix=".0.0"
+         fi
+       fi
+
+       # Remove version info from name if versioning should be avoided
+       if test "$avoid_version" = yes && test "$need_version" = no; then
+         major=
+         versuffix=
+         verstring=""
+       fi
+
+       # Check to see if the archive will have undefined symbols.
+       if test "$allow_undefined" = yes; then
+         if test "$allow_undefined_flag" = unsupported; then
+           $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2
+           build_libtool_libs=no
+           build_old_libs=yes
+         fi
+       else
+         # Don't allow undefined symbols.
+         allow_undefined_flag="$no_undefined_flag"
+       fi
+      fi
+
+      if test "$mode" != relink; then
+       # Remove our outputs, but don't remove object files since they
+       # may have been created when compiling PIC objects.
+       removelist=
+       tempremovelist=`$echo "$output_objdir/*"`
+       for p in $tempremovelist; do
+         case $p in
+           *.$objext)
+              ;;
+           $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
+              if test "X$precious_files_regex" != "X"; then
+                if echo $p | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
+                then
+                  continue
+                fi
+              fi
+              removelist="$removelist $p"
+              ;;
+           *) ;;
+         esac
+       done
+       if test -n "$removelist"; then
+         $show "${rm}r $removelist"
+         $run ${rm}r $removelist
+       fi
+      fi
+
+      # Now set the variables for building old libraries.
+      if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
+       oldlibs="$oldlibs $output_objdir/$libname.$libext"
+
+       # Transform .lo files to .o files.
+       oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
+      fi
+
+      # Eliminate all temporary directories.
+      #for path in $notinst_path; do
+      #        lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"`
+      #        deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"`
+      #        dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"`
+      #done
+
+      if test -n "$xrpath"; then
+       # If the user specified any rpath flags, then add them.
+       temp_xrpath=
+       for libdir in $xrpath; do
+         temp_xrpath="$temp_xrpath -R$libdir"
+         case "$finalize_rpath " in
+         *" $libdir "*) ;;
+         *) finalize_rpath="$finalize_rpath $libdir" ;;
+         esac
+       done
+       if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
+         dependency_libs="$temp_xrpath $dependency_libs"
+       fi
+      fi
+
+      # Make sure dlfiles contains only unique files that won't be dlpreopened
+      old_dlfiles="$dlfiles"
+      dlfiles=
+      for lib in $old_dlfiles; do
+       case " $dlprefiles $dlfiles " in
+       *" $lib "*) ;;
+       *) dlfiles="$dlfiles $lib" ;;
+       esac
+      done
+
+      # Make sure dlprefiles contains only unique files
+      old_dlprefiles="$dlprefiles"
+      dlprefiles=
+      for lib in $old_dlprefiles; do
+       case "$dlprefiles " in
+       *" $lib "*) ;;
+       *) dlprefiles="$dlprefiles $lib" ;;
+       esac
+      done
+
+      if test "$build_libtool_libs" = yes; then
+       if test -n "$rpath"; then
+         case $host in
+         *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*)
+           # these systems don't actually have a c library (as such)!
+           ;;
+         *-*-rhapsody* | *-*-darwin1.[012])
+           # Rhapsody C library is in the System framework
+           deplibs="$deplibs -framework System"
+           ;;
+         *-*-netbsd*)
+           # Don't link with libc until the a.out ld.so is fixed.
+           ;;
+         *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+           # Do not include libc due to us having libc/libc_r.
+           ;;
+         *-*-sco3.2v5* | *-*-sco5v6*)
+           # Causes problems with __ctype
+           ;;
+         *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+           # Compiler inserts libc in the correct place for threads to work
+           ;;
+         *)
+           # Add libc to deplibs on all other systems if necessary.
+           if test "$build_libtool_need_lc" = "yes"; then
+             deplibs="$deplibs -lc"
+           fi
+           ;;
+         esac
+       fi
+
+       # Transform deplibs into only deplibs that can be linked in shared.
+       name_save=$name
+       libname_save=$libname
+       release_save=$release
+       versuffix_save=$versuffix
+       major_save=$major
+       # I'm not sure if I'm treating the release correctly.  I think
+       # release should show up in the -l (ie -lgmp5) so we don't want to
+       # add it in twice.  Is that correct?
+       release=""
+       versuffix=""
+       major=""
+       newdeplibs=
+       droppeddeps=no
+       case $deplibs_check_method in
+       pass_all)
+         # Don't check for shared/static.  Everything works.
+         # This might be a little naive.  We might want to check
+         # whether the library exists or not.  But this is on
+         # osf3 & osf4 and I'm not really sure... Just
+         # implementing what was already the behavior.
+         newdeplibs=$deplibs
+         ;;
+       test_compile)
+         # This code stresses the "libraries are programs" paradigm to its
+         # limits. Maybe even breaks it.  We compile a program, linking it
+         # against the deplibs as a proxy for the library.  Then we can check
+         # whether they linked in statically or dynamically with ldd.
+         $rm conftest.c
+         cat > conftest.c <<EOF
+         int main() { return 0; }
+EOF
+         $rm conftest
+         if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
+           ldd_output=`ldd conftest`
+           for i in $deplibs; do
+             name=`expr $i : '-l\(.*\)'`
+             # If $name is empty we are operating on a -L argument.
+              if test "$name" != "" && test "$name" != "0"; then
+               if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+                 case " $predeps $postdeps " in
+                 *" $i "*)
+                   newdeplibs="$newdeplibs $i"
+                   i=""
+                   ;;
+                 esac
+               fi
+               if test -n "$i" ; then
+                 libname=`eval \\$echo \"$libname_spec\"`
+                 deplib_matches=`eval \\$echo \"$library_names_spec\"`
+                 set dummy $deplib_matches
+                 deplib_match=$2
+                 if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+                   newdeplibs="$newdeplibs $i"
+                 else
+                   droppeddeps=yes
+                   $echo
+                   $echo "*** Warning: dynamic linker does not accept needed library $i."
+                   $echo "*** I have the capability to make that library automatically link in when"
+                   $echo "*** you link to this library.  But I can only do this if you have a"
+                   $echo "*** shared version of the library, which I believe you do not have"
+                   $echo "*** because a test_compile did reveal that the linker did not use it for"
+                   $echo "*** its dynamic dependency list that programs get resolved with at runtime."
+                 fi
+               fi
+             else
+               newdeplibs="$newdeplibs $i"
+             fi
+           done
+         else
+           # Error occurred in the first compile.  Let's try to salvage
+           # the situation: Compile a separate program for each library.
+           for i in $deplibs; do
+             name=`expr $i : '-l\(.*\)'`
+             # If $name is empty we are operating on a -L argument.
+              if test "$name" != "" && test "$name" != "0"; then
+               $rm conftest
+               if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
+                 ldd_output=`ldd conftest`
+                 if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+                   case " $predeps $postdeps " in
+                   *" $i "*)
+                     newdeplibs="$newdeplibs $i"
+                     i=""
+                     ;;
+                   esac
+                 fi
+                 if test -n "$i" ; then
+                   libname=`eval \\$echo \"$libname_spec\"`
+                   deplib_matches=`eval \\$echo \"$library_names_spec\"`
+                   set dummy $deplib_matches
+                   deplib_match=$2
+                   if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+                     newdeplibs="$newdeplibs $i"
+                   else
+                     droppeddeps=yes
+                     $echo
+                     $echo "*** Warning: dynamic linker does not accept needed library $i."
+                     $echo "*** I have the capability to make that library automatically link in when"
+                     $echo "*** you link to this library.  But I can only do this if you have a"
+                     $echo "*** shared version of the library, which you do not appear to have"
+                     $echo "*** because a test_compile did reveal that the linker did not use this one"
+                     $echo "*** as a dynamic dependency that programs can get resolved with at runtime."
+                   fi
+                 fi
+               else
+                 droppeddeps=yes
+                 $echo
+                 $echo "*** Warning!  Library $i is needed by this library but I was not able to"
+                 $echo "*** make it link in!  You will probably need to install it or some"
+                 $echo "*** library that it depends on before this library will be fully"
+                 $echo "*** functional.  Installing it before continuing would be even better."
+               fi
+             else
+               newdeplibs="$newdeplibs $i"
+             fi
+           done
+         fi
+         ;;
+       file_magic*)
+         set dummy $deplibs_check_method
+         file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
+         for a_deplib in $deplibs; do
+           name=`expr $a_deplib : '-l\(.*\)'`
+           # If $name is empty we are operating on a -L argument.
+            if test "$name" != "" && test  "$name" != "0"; then
+             if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+               case " $predeps $postdeps " in
+               *" $a_deplib "*)
+                 newdeplibs="$newdeplibs $a_deplib"
+                 a_deplib=""
+                 ;;
+               esac
+             fi
+             if test -n "$a_deplib" ; then
+               libname=`eval \\$echo \"$libname_spec\"`
+               for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+                 potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+                 for potent_lib in $potential_libs; do
+                     # Follow soft links.
+                     if ls -lLd "$potent_lib" 2>/dev/null \
+                        | grep " -> " >/dev/null; then
+                       continue
+                     fi
+                     # The statement above tries to avoid entering an
+                     # endless loop below, in case of cyclic links.
+                     # We might still enter an endless loop, since a link
+                     # loop can be closed while we follow links,
+                     # but so what?
+                     potlib="$potent_lib"
+                     while test -h "$potlib" 2>/dev/null; do
+                       potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
+                       case $potliblink in
+                       [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
+                       *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
+                       esac
+                     done
+                     if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \
+                        | ${SED} 10q \
+                        | $EGREP "$file_magic_regex" > /dev/null; then
+                       newdeplibs="$newdeplibs $a_deplib"
+                       a_deplib=""
+                       break 2
+                     fi
+                 done
+               done
+             fi
+             if test -n "$a_deplib" ; then
+               droppeddeps=yes
+               $echo
+               $echo "*** Warning: linker path does not have real file for library $a_deplib."
+               $echo "*** I have the capability to make that library automatically link in when"
+               $echo "*** you link to this library.  But I can only do this if you have a"
+               $echo "*** shared version of the library, which you do not appear to have"
+               $echo "*** because I did check the linker path looking for a file starting"
+               if test -z "$potlib" ; then
+                 $echo "*** with $libname but no candidates were found. (...for file magic test)"
+               else
+                 $echo "*** with $libname and none of the candidates passed a file format test"
+                 $echo "*** using a file magic. Last file checked: $potlib"
+               fi
+             fi
+           else
+             # Add a -L argument.
+             newdeplibs="$newdeplibs $a_deplib"
+           fi
+         done # Gone through all deplibs.
+         ;;
+       match_pattern*)
+         set dummy $deplibs_check_method
+         match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
+         for a_deplib in $deplibs; do
+           name=`expr $a_deplib : '-l\(.*\)'`
+           # If $name is empty we are operating on a -L argument.
+           if test -n "$name" && test "$name" != "0"; then
+             if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+               case " $predeps $postdeps " in
+               *" $a_deplib "*)
+                 newdeplibs="$newdeplibs $a_deplib"
+                 a_deplib=""
+                 ;;
+               esac
+             fi
+             if test -n "$a_deplib" ; then
+               libname=`eval \\$echo \"$libname_spec\"`
+               for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+                 potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+                 for potent_lib in $potential_libs; do
+                   potlib="$potent_lib" # see symlink-check above in file_magic test
+                   if eval $echo \"$potent_lib\" 2>/dev/null \
+                       | ${SED} 10q \
+                       | $EGREP "$match_pattern_regex" > /dev/null; then
+                     newdeplibs="$newdeplibs $a_deplib"
+                     a_deplib=""
+                     break 2
+                   fi
+                 done
+               done
+             fi
+             if test -n "$a_deplib" ; then
+               droppeddeps=yes
+               $echo
+               $echo "*** Warning: linker path does not have real file for library $a_deplib."
+               $echo "*** I have the capability to make that library automatically link in when"
+               $echo "*** you link to this library.  But I can only do this if you have a"
+               $echo "*** shared version of the library, which you do not appear to have"
+               $echo "*** because I did check the linker path looking for a file starting"
+               if test -z "$potlib" ; then
+                 $echo "*** with $libname but no candidates were found. (...for regex pattern test)"
+               else
+                 $echo "*** with $libname and none of the candidates passed a file format test"
+                 $echo "*** using a regex pattern. Last file checked: $potlib"
+               fi
+             fi
+           else
+             # Add a -L argument.
+             newdeplibs="$newdeplibs $a_deplib"
+           fi
+         done # Gone through all deplibs.
+         ;;
+       none | unknown | *)
+         newdeplibs=""
+         tmp_deplibs=`$echo "X $deplibs" | $Xsed -e 's/ -lc$//' \
+           -e 's/ -[LR][^ ]*//g'`
+         if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+           for i in $predeps $postdeps ; do
+             # can't use Xsed below, because $i might contain '/'
+             tmp_deplibs=`$echo "X $tmp_deplibs" | ${SED} -e "1s,^X,," -e "s,$i,,"`
+           done
+         fi
+         if $echo "X $tmp_deplibs" | $Xsed -e 's/[     ]//g' \
+           | grep . >/dev/null; then
+           $echo
+           if test "X$deplibs_check_method" = "Xnone"; then
+             $echo "*** Warning: inter-library dependencies are not supported in this platform."
+           else
+             $echo "*** Warning: inter-library dependencies are not known to be supported."
+           fi
+           $echo "*** All declared inter-library dependencies are being dropped."
+           droppeddeps=yes
+         fi
+         ;;
+       esac
+       versuffix=$versuffix_save
+       major=$major_save
+       release=$release_save
+       libname=$libname_save
+       name=$name_save
+
+       case $host in
+       *-*-rhapsody* | *-*-darwin1.[012])
+         # On Rhapsody replace the C library is the System framework
+         newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'`
+         ;;
+       esac
+
+       if test "$droppeddeps" = yes; then
+         if test "$module" = yes; then
+           $echo
+           $echo "*** Warning: libtool could not satisfy all declared inter-library"
+           $echo "*** dependencies of module $libname.  Therefore, libtool will create"
+           $echo "*** a static module, that should work as long as the dlopening"
+           $echo "*** application is linked with the -dlopen flag."
+           if test -z "$global_symbol_pipe"; then
+             $echo
+             $echo "*** However, this would only work if libtool was able to extract symbol"
+             $echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+             $echo "*** not find such a program.  So, this module is probably useless."
+             $echo "*** \`nm' from GNU binutils and a full rebuild may help."
+           fi
+           if test "$build_old_libs" = no; then
+             oldlibs="$output_objdir/$libname.$libext"
+             build_libtool_libs=module
+             build_old_libs=yes
+           else
+             build_libtool_libs=no
+           fi
+         else
+           $echo "*** The inter-library dependencies that have been dropped here will be"
+           $echo "*** automatically added whenever a program is linked with this library"
+           $echo "*** or is declared to -dlopen it."
+
+           if test "$allow_undefined" = no; then
+             $echo
+             $echo "*** Since this library must not contain undefined symbols,"
+             $echo "*** because either the platform does not support them or"
+             $echo "*** it was explicitly requested with -no-undefined,"
+             $echo "*** libtool will only create a static version of it."
+             if test "$build_old_libs" = no; then
+               oldlibs="$output_objdir/$libname.$libext"
+               build_libtool_libs=module
+               build_old_libs=yes
+             else
+               build_libtool_libs=no
+             fi
+           fi
+         fi
+       fi
+       # Done checking deplibs!
+       deplibs=$newdeplibs
+      fi
+
+
+      # move library search paths that coincide with paths to not yet
+      # installed libraries to the beginning of the library search list
+      new_libs=
+      for path in $notinst_path; do
+       case " $new_libs " in
+       *" -L$path/$objdir "*) ;;
+       *)
+         case " $deplibs " in
+         *" -L$path/$objdir "*)
+           new_libs="$new_libs -L$path/$objdir" ;;
+         esac
+         ;;
+       esac
+      done
+      for deplib in $deplibs; do
+       case $deplib in
+       -L*)
+         case " $new_libs " in
+         *" $deplib "*) ;;
+         *) new_libs="$new_libs $deplib" ;;
+         esac
+         ;;
+       *) new_libs="$new_libs $deplib" ;;
+       esac
+      done
+      deplibs="$new_libs"
+
+
+      # All the library-specific variables (install_libdir is set above).
+      library_names=
+      old_library=
+      dlname=
+
+      # Test again, we may have decided not to build it any more
+      if test "$build_libtool_libs" = yes; then
+       if test "$hardcode_into_libs" = yes; then
+         # Hardcode the library paths
+         hardcode_libdirs=
+         dep_rpath=
+         rpath="$finalize_rpath"
+         test "$mode" != relink && rpath="$compile_rpath$rpath"
+         for libdir in $rpath; do
+           if test -n "$hardcode_libdir_flag_spec"; then
+             if test -n "$hardcode_libdir_separator"; then
+               if test -z "$hardcode_libdirs"; then
+                 hardcode_libdirs="$libdir"
+               else
+                 # Just accumulate the unique libdirs.
+                 case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+                 *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+                   ;;
+                 *)
+                   hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+                   ;;
+                 esac
+               fi
+             else
+               eval flag=\"$hardcode_libdir_flag_spec\"
+               dep_rpath="$dep_rpath $flag"
+             fi
+           elif test -n "$runpath_var"; then
+             case "$perm_rpath " in
+             *" $libdir "*) ;;
+             *) perm_rpath="$perm_rpath $libdir" ;;
+             esac
+           fi
+         done
+         # Substitute the hardcoded libdirs into the rpath.
+         if test -n "$hardcode_libdir_separator" &&
+            test -n "$hardcode_libdirs"; then
+           libdir="$hardcode_libdirs"
+           if test -n "$hardcode_libdir_flag_spec_ld"; then
+             case $archive_cmds in
+             *\$LD*) eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" ;;
+             *)      eval dep_rpath=\"$hardcode_libdir_flag_spec\" ;;
+             esac
+           else
+             eval dep_rpath=\"$hardcode_libdir_flag_spec\"
+           fi
+         fi
+         if test -n "$runpath_var" && test -n "$perm_rpath"; then
+           # We should set the runpath_var.
+           rpath=
+           for dir in $perm_rpath; do
+             rpath="$rpath$dir:"
+           done
+           eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
+         fi
+         test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
+       fi
+
+       shlibpath="$finalize_shlibpath"
+       test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
+       if test -n "$shlibpath"; then
+         eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
+       fi
+
+       # Get the real and link names of the library.
+       eval shared_ext=\"$shrext_cmds\"
+       eval library_names=\"$library_names_spec\"
+       set dummy $library_names
+       realname="$2"
+       shift; shift
+
+       if test -n "$soname_spec"; then
+         eval soname=\"$soname_spec\"
+       else
+         soname="$realname"
+       fi
+       if test -z "$dlname"; then
+         dlname=$soname
+       fi
+
+       lib="$output_objdir/$realname"
+       linknames=
+       for link
+       do
+         linknames="$linknames $link"
+       done
+
+       # Use standard objects if they are pic
+       test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+
+       # Prepare the list of exported symbols
+       if test -z "$export_symbols"; then
+         if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
+           $show "generating symbol list for \`$libname.la'"
+           export_symbols="$output_objdir/$libname.exp"
+           $run $rm $export_symbols
+           cmds=$export_symbols_cmds
+           save_ifs="$IFS"; IFS='~'
+           for cmd in $cmds; do
+             IFS="$save_ifs"
+             eval cmd=\"$cmd\"
+             if len=`expr "X$cmd" : ".*"` &&
+              test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+               $show "$cmd"
+               $run eval "$cmd" || exit $?
+               skipped_export=false
+             else
+               # The command line is too long to execute in one step.
+               $show "using reloadable object file for export list..."
+               skipped_export=:
+               # Break out early, otherwise skipped_export may be
+               # set to false by a later but shorter cmd.
+               break
+             fi
+           done
+           IFS="$save_ifs"
+           if test -n "$export_symbols_regex"; then
+             $show "$EGREP -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\""
+             $run eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+             $show "$mv \"${export_symbols}T\" \"$export_symbols\""
+             $run eval '$mv "${export_symbols}T" "$export_symbols"'
+           fi
+         fi
+       fi
+
+       if test -n "$export_symbols" && test -n "$include_expsyms"; then
+         $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"'
+       fi
+
+       tmp_deplibs=
+       for test_deplib in $deplibs; do
+               case " $convenience " in
+               *" $test_deplib "*) ;;
+               *)
+                       tmp_deplibs="$tmp_deplibs $test_deplib"
+                       ;;
+               esac
+       done
+       deplibs="$tmp_deplibs"
+
+       if test -n "$convenience"; then
+         if test -n "$whole_archive_flag_spec"; then
+           save_libobjs=$libobjs
+           eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+         else
+           gentop="$output_objdir/${outputname}x"
+           generated="$generated $gentop"
+
+           func_extract_archives $gentop $convenience
+           libobjs="$libobjs $func_extract_archives_result"
+         fi
+       fi
+       
+       if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
+         eval flag=\"$thread_safe_flag_spec\"
+         linker_flags="$linker_flags $flag"
+       fi
+
+       # Make a backup of the uninstalled library when relinking
+       if test "$mode" = relink; then
+         $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $?
+       fi
+
+       # Do each of the archive commands.
+       if test "$module" = yes && test -n "$module_cmds" ; then
+         if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+           eval test_cmds=\"$module_expsym_cmds\"
+           cmds=$module_expsym_cmds
+         else
+           eval test_cmds=\"$module_cmds\"
+           cmds=$module_cmds
+         fi
+       else
+       if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+         eval test_cmds=\"$archive_expsym_cmds\"
+         cmds=$archive_expsym_cmds
+       else
+         eval test_cmds=\"$archive_cmds\"
+         cmds=$archive_cmds
+         fi
+       fi
+
+       if test "X$skipped_export" != "X:" &&
+          len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
+          test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+         :
+       else
+         # The command line is too long to link in one step, link piecewise.
+         $echo "creating reloadable object files..."
+
+         # Save the value of $output and $libobjs because we want to
+         # use them later.  If we have whole_archive_flag_spec, we
+         # want to use save_libobjs as it was before
+         # whole_archive_flag_spec was expanded, because we can't
+         # assume the linker understands whole_archive_flag_spec.
+         # This may have to be revisited, in case too many
+         # convenience libraries get linked in and end up exceeding
+         # the spec.
+         if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
+           save_libobjs=$libobjs
+         fi
+         save_output=$output
+         output_la=`$echo "X$output" | $Xsed -e "$basename"`
+
+         # Clear the reloadable object creation command queue and
+         # initialize k to one.
+         test_cmds=
+         concat_cmds=
+         objlist=
+         delfiles=
+         last_robj=
+         k=1
+         output=$output_objdir/$output_la-${k}.$objext
+         # Loop over the list of objects to be linked.
+         for obj in $save_libobjs
+         do
+           eval test_cmds=\"$reload_cmds $objlist $last_robj\"
+           if test "X$objlist" = X ||
+              { len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
+                test "$len" -le "$max_cmd_len"; }; then
+             objlist="$objlist $obj"
+           else
+             # The command $test_cmds is almost too long, add a
+             # command to the queue.
+             if test "$k" -eq 1 ; then
+               # The first file doesn't have a previous command to add.
+               eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
+             else
+               # All subsequent reloadable object files will link in
+               # the last one created.
+               eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\"
+             fi
+             last_robj=$output_objdir/$output_la-${k}.$objext
+             k=`expr $k + 1`
+             output=$output_objdir/$output_la-${k}.$objext
+             objlist=$obj
+             len=1
+           fi
+         done
+         # Handle the remaining objects by creating one last
+         # reloadable object file.  All subsequent reloadable object
+         # files will link in the last one created.
+         test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+         eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
+
+         if ${skipped_export-false}; then
+           $show "generating symbol list for \`$libname.la'"
+           export_symbols="$output_objdir/$libname.exp"
+           $run $rm $export_symbols
+           libobjs=$output
+           # Append the command to create the export file.
+           eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\"
+          fi
+
+         # Set up a command to remove the reloadable object files
+         # after they are used.
+         i=0
+         while test "$i" -lt "$k"
+         do
+           i=`expr $i + 1`
+           delfiles="$delfiles $output_objdir/$output_la-${i}.$objext"
+         done
+
+         $echo "creating a temporary reloadable object file: $output"
+
+         # Loop through the commands generated above and execute them.
+         save_ifs="$IFS"; IFS='~'
+         for cmd in $concat_cmds; do
+           IFS="$save_ifs"
+           $show "$cmd"
+           $run eval "$cmd" || exit $?
+         done
+         IFS="$save_ifs"
+
+         libobjs=$output
+         # Restore the value of output.
+         output=$save_output
+
+         if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
+           eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+         fi
+         # Expand the library linking commands again to reset the
+         # value of $libobjs for piecewise linking.
+
+         # Do each of the archive commands.
+         if test "$module" = yes && test -n "$module_cmds" ; then
+           if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+             cmds=$module_expsym_cmds
+           else
+             cmds=$module_cmds
+           fi
+         else
+         if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+           cmds=$archive_expsym_cmds
+         else
+           cmds=$archive_cmds
+           fi
+         fi
+
+         # Append the command to remove the reloadable object files
+         # to the just-reset $cmds.
+         eval cmds=\"\$cmds~\$rm $delfiles\"
+       fi
+       save_ifs="$IFS"; IFS='~'
+       for cmd in $cmds; do
+         IFS="$save_ifs"
+         eval cmd=\"$cmd\"
+         $show "$cmd"
+         $run eval "$cmd" || {
+           lt_exit=$?
+
+           # Restore the uninstalled library and exit
+           if test "$mode" = relink; then
+             $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'
+           fi
+
+           exit $lt_exit
+         }
+       done
+       IFS="$save_ifs"
+
+       # Restore the uninstalled library and exit
+       if test "$mode" = relink; then
+         $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $?
+
+         if test -n "$convenience"; then
+           if test -z "$whole_archive_flag_spec"; then
+             $show "${rm}r $gentop"
+             $run ${rm}r "$gentop"
+           fi
+         fi
+
+         exit $EXIT_SUCCESS
+       fi
+
+       # Create links to the real library.
+       for linkname in $linknames; do
+         if test "$realname" != "$linkname"; then
+           $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)"
+           $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $?
+         fi
+       done
+
+       # If -module or -export-dynamic was specified, set the dlname.
+       if test "$module" = yes || test "$export_dynamic" = yes; then
+         # On all known operating systems, these are identical.
+         dlname="$soname"
+       fi
+      fi
+      ;;
+
+    obj)
+      if test -n "$deplibs"; then
+       $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2
+      fi
+
+      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+       $echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2
+      fi
+
+      if test -n "$rpath"; then
+       $echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2
+      fi
+
+      if test -n "$xrpath"; then
+       $echo "$modename: warning: \`-R' is ignored for objects" 1>&2
+      fi
+
+      if test -n "$vinfo"; then
+       $echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2
+      fi
+
+      if test -n "$release"; then
+       $echo "$modename: warning: \`-release' is ignored for objects" 1>&2
+      fi
+
+      case $output in
+      *.lo)
+       if test -n "$objs$old_deplibs"; then
+         $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2
+         exit $EXIT_FAILURE
+       fi
+       libobj="$output"
+       obj=`$echo "X$output" | $Xsed -e "$lo2o"`
+       ;;
+      *)
+       libobj=
+       obj="$output"
+       ;;
+      esac
+
+      # Delete the old objects.
+      $run $rm $obj $libobj
+
+      # Objects from convenience libraries.  This assumes
+      # single-version convenience libraries.  Whenever we create
+      # different ones for PIC/non-PIC, this we'll have to duplicate
+      # the extraction.
+      reload_conv_objs=
+      gentop=
+      # reload_cmds runs $LD directly, so let us get rid of
+      # -Wl from whole_archive_flag_spec and hope we can get by with
+      # turning comma into space..
+      wl=
+
+      if test -n "$convenience"; then
+       if test -n "$whole_archive_flag_spec"; then
+         eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
+         reload_conv_objs=$reload_objs\ `$echo "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'`
+       else
+         gentop="$output_objdir/${obj}x"
+         generated="$generated $gentop"
+
+         func_extract_archives $gentop $convenience
+         reload_conv_objs="$reload_objs $func_extract_archives_result"
+       fi
+      fi
+
+      # Create the old-style object.
+      reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
+
+      output="$obj"
+      cmds=$reload_cmds
+      save_ifs="$IFS"; IFS='~'
+      for cmd in $cmds; do
+       IFS="$save_ifs"
+       eval cmd=\"$cmd\"
+       $show "$cmd"
+       $run eval "$cmd" || exit $?
+      done
+      IFS="$save_ifs"
+
+      # Exit if we aren't doing a library object file.
+      if test -z "$libobj"; then
+       if test -n "$gentop"; then
+         $show "${rm}r $gentop"
+         $run ${rm}r $gentop
+       fi
+
+       exit $EXIT_SUCCESS
+      fi
+
+      if test "$build_libtool_libs" != yes; then
+       if test -n "$gentop"; then
+         $show "${rm}r $gentop"
+         $run ${rm}r $gentop
+       fi
+
+       # Create an invalid libtool object if no PIC, so that we don't
+       # accidentally link it into a program.
+       # $show "echo timestamp > $libobj"
+       # $run eval "echo timestamp > $libobj" || exit $?
+       exit $EXIT_SUCCESS
+      fi
+
+      if test -n "$pic_flag" || test "$pic_mode" != default; then
+       # Only do commands if we really have different PIC objects.
+       reload_objs="$libobjs $reload_conv_objs"
+       output="$libobj"
+       cmds=$reload_cmds
+       save_ifs="$IFS"; IFS='~'
+       for cmd in $cmds; do
+         IFS="$save_ifs"
+         eval cmd=\"$cmd\"
+         $show "$cmd"
+         $run eval "$cmd" || exit $?
+       done
+       IFS="$save_ifs"
+      fi
+
+      if test -n "$gentop"; then
+       $show "${rm}r $gentop"
+       $run ${rm}r $gentop
+      fi
+
+      exit $EXIT_SUCCESS
+      ;;
+
+    prog)
+      case $host in
+       *cygwin*) output=`$echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;;
+      esac
+      if test -n "$vinfo"; then
+       $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2
+      fi
+
+      if test -n "$release"; then
+       $echo "$modename: warning: \`-release' is ignored for programs" 1>&2
+      fi
+
+      if test "$preload" = yes; then
+       if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown &&
+          test "$dlopen_self_static" = unknown; then
+         $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support."
+       fi
+      fi
+
+      case $host in
+      *-*-rhapsody* | *-*-darwin1.[012])
+       # On Rhapsody replace the C library is the System framework
+       compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
+       finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
+       ;;
+      esac
+
+      case $host in
+      *darwin*)
+        # Don't allow lazy linking, it breaks C++ global constructors
+        if test "$tagname" = CXX ; then
+        compile_command="$compile_command ${wl}-bind_at_load"
+        finalize_command="$finalize_command ${wl}-bind_at_load"
+        fi
+        ;;
+      esac
+
+
+      # move library search paths that coincide with paths to not yet
+      # installed libraries to the beginning of the library search list
+      new_libs=
+      for path in $notinst_path; do
+       case " $new_libs " in
+       *" -L$path/$objdir "*) ;;
+       *)
+         case " $compile_deplibs " in
+         *" -L$path/$objdir "*)
+           new_libs="$new_libs -L$path/$objdir" ;;
+         esac
+         ;;
+       esac
+      done
+      for deplib in $compile_deplibs; do
+       case $deplib in
+       -L*)
+         case " $new_libs " in
+         *" $deplib "*) ;;
+         *) new_libs="$new_libs $deplib" ;;
+         esac
+         ;;
+       *) new_libs="$new_libs $deplib" ;;
+       esac
+      done
+      compile_deplibs="$new_libs"
+
+
+      compile_command="$compile_command $compile_deplibs"
+      finalize_command="$finalize_command $finalize_deplibs"
+
+      if test -n "$rpath$xrpath"; then
+       # If the user specified any rpath flags, then add them.
+       for libdir in $rpath $xrpath; do
+         # This is the magic to use -rpath.
+         case "$finalize_rpath " in
+         *" $libdir "*) ;;
+         *) finalize_rpath="$finalize_rpath $libdir" ;;
+         esac
+       done
+      fi
+
+      # Now hardcode the library paths
+      rpath=
+      hardcode_libdirs=
+      for libdir in $compile_rpath $finalize_rpath; do
+       if test -n "$hardcode_libdir_flag_spec"; then
+         if test -n "$hardcode_libdir_separator"; then
+           if test -z "$hardcode_libdirs"; then
+             hardcode_libdirs="$libdir"
+           else
+             # Just accumulate the unique libdirs.
+             case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+             *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+               ;;
+             *)
+               hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+               ;;
+             esac
+           fi
+         else
+           eval flag=\"$hardcode_libdir_flag_spec\"
+           rpath="$rpath $flag"
+         fi
+       elif test -n "$runpath_var"; then
+         case "$perm_rpath " in
+         *" $libdir "*) ;;
+         *) perm_rpath="$perm_rpath $libdir" ;;
+         esac
+       fi
+       case $host in
+       *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+         testbindir=`$echo "X$libdir" | $Xsed -e 's*/lib$*/bin*'`
+         case :$dllsearchpath: in
+         *":$libdir:"*) ;;
+         *) dllsearchpath="$dllsearchpath:$libdir";;
+         esac
+         case :$dllsearchpath: in
+         *":$testbindir:"*) ;;
+         *) dllsearchpath="$dllsearchpath:$testbindir";;
+         esac
+         ;;
+       esac
+      done
+      # Substitute the hardcoded libdirs into the rpath.
+      if test -n "$hardcode_libdir_separator" &&
+        test -n "$hardcode_libdirs"; then
+       libdir="$hardcode_libdirs"
+       eval rpath=\" $hardcode_libdir_flag_spec\"
+      fi
+      compile_rpath="$rpath"
+
+      rpath=
+      hardcode_libdirs=
+      for libdir in $finalize_rpath; do
+       if test -n "$hardcode_libdir_flag_spec"; then
+         if test -n "$hardcode_libdir_separator"; then
+           if test -z "$hardcode_libdirs"; then
+             hardcode_libdirs="$libdir"
+           else
+             # Just accumulate the unique libdirs.
+             case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+             *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+               ;;
+             *)
+               hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+               ;;
+             esac
+           fi
+         else
+           eval flag=\"$hardcode_libdir_flag_spec\"
+           rpath="$rpath $flag"
+         fi
+       elif test -n "$runpath_var"; then
+         case "$finalize_perm_rpath " in
+         *" $libdir "*) ;;
+         *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
+         esac
+       fi
+      done
+      # Substitute the hardcoded libdirs into the rpath.
+      if test -n "$hardcode_libdir_separator" &&
+        test -n "$hardcode_libdirs"; then
+       libdir="$hardcode_libdirs"
+       eval rpath=\" $hardcode_libdir_flag_spec\"
+      fi
+      finalize_rpath="$rpath"
+
+      if test -n "$libobjs" && test "$build_old_libs" = yes; then
+       # Transform all the library objects into standard objects.
+       compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+       finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+      fi
+
+      dlsyms=
+      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+       if test -n "$NM" && test -n "$global_symbol_pipe"; then
+         dlsyms="${outputname}S.c"
+       else
+         $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2
+       fi
+      fi
+
+      if test -n "$dlsyms"; then
+       case $dlsyms in
+       "") ;;
+       *.c)
+         # Discover the nlist of each of the dlfiles.
+         nlist="$output_objdir/${outputname}.nm"
+
+         $show "$rm $nlist ${nlist}S ${nlist}T"
+         $run $rm "$nlist" "${nlist}S" "${nlist}T"
+
+         # Parse the name list into a source file.
+         $show "creating $output_objdir/$dlsyms"
+
+         test -z "$run" && $echo > "$output_objdir/$dlsyms" "\
+/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */
+/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */
+
+#ifdef __cplusplus
+extern \"C\" {
+#endif
+
+/* Prevent the only kind of declaration conflicts we can make. */
+#define lt_preloaded_symbols some_other_symbol
+
+/* External symbol declarations for the compiler. */\
+"
+
+         if test "$dlself" = yes; then
+           $show "generating symbol list for \`$output'"
+
+           test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist"
+
+           # Add our own program objects to the symbol list.
+           progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+           for arg in $progfiles; do
+             $show "extracting global C symbols from \`$arg'"
+             $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
+           done
+
+           if test -n "$exclude_expsyms"; then
+             $run eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
+             $run eval '$mv "$nlist"T "$nlist"'
+           fi
+
+           if test -n "$export_symbols_regex"; then
+             $run eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
+             $run eval '$mv "$nlist"T "$nlist"'
+           fi
+
+           # Prepare the list of exported symbols
+           if test -z "$export_symbols"; then
+             export_symbols="$output_objdir/$outputname.exp"
+             $run $rm $export_symbols
+             $run eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+              case $host in
+              *cygwin* | *mingw* )
+               $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+               $run eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
+                ;;
+              esac
+           else
+             $run eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
+             $run eval 'grep -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
+             $run eval 'mv "$nlist"T "$nlist"'
+              case $host in
+              *cygwin* | *mingw* )
+               $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+               $run eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
+                ;;
+              esac
+           fi
+         fi
+
+         for arg in $dlprefiles; do
+           $show "extracting global C symbols from \`$arg'"
+           name=`$echo "$arg" | ${SED} -e 's%^.*/%%'`
+           $run eval '$echo ": $name " >> "$nlist"'
+           $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
+         done
+
+         if test -z "$run"; then
+           # Make sure we have at least an empty file.
+           test -f "$nlist" || : > "$nlist"
+
+           if test -n "$exclude_expsyms"; then
+             $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
+             $mv "$nlist"T "$nlist"
+           fi
+
+           # Try sorting and uniquifying the output.
+           if grep -v "^: " < "$nlist" |
+               if sort -k 3 </dev/null >/dev/null 2>&1; then
+                 sort -k 3
+               else
+                 sort +2
+               fi |
+               uniq > "$nlist"S; then
+             :
+           else
+             grep -v "^: " < "$nlist" > "$nlist"S
+           fi
+
+           if test -f "$nlist"S; then
+             eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"'
+           else
+             $echo '/* NONE */' >> "$output_objdir/$dlsyms"
+           fi
+
+           $echo >> "$output_objdir/$dlsyms" "\
+
+#undef lt_preloaded_symbols
+
+#if defined (__STDC__) && __STDC__
+# define lt_ptr void *
+#else
+# define lt_ptr char *
+# define const
+#endif
+
+/* The mapping between symbol names and symbols. */
+"
+
+           case $host in
+           *cygwin* | *mingw* )
+         $echo >> "$output_objdir/$dlsyms" "\
+/* DATA imports from DLLs on WIN32 can't be const, because
+   runtime relocations are performed -- see ld's documentation
+   on pseudo-relocs */
+struct {
+"
+             ;;
+           * )
+         $echo >> "$output_objdir/$dlsyms" "\
+const struct {
+"
+             ;;
+           esac
+
+
+         $echo >> "$output_objdir/$dlsyms" "\
+  const char *name;
+  lt_ptr address;
+}
+lt_preloaded_symbols[] =
+{\
+"
+
+           eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms"
+
+           $echo >> "$output_objdir/$dlsyms" "\
+  {0, (lt_ptr) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+  return lt_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif\
+"
+         fi
+
+         pic_flag_for_symtable=
+         case $host in
+         # compiling the symbol table file with pic_flag works around
+         # a FreeBSD bug that causes programs to crash when -lm is
+         # linked before any other PIC object.  But we must not use
+         # pic_flag when linking with -static.  The problem exists in
+         # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
+         *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
+           case "$compile_command " in
+           *" -static "*) ;;
+           *) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";;
+           esac;;
+         *-*-hpux*)
+           case "$compile_command " in
+           *" -static "*) ;;
+           *) pic_flag_for_symtable=" $pic_flag";;
+           esac
+         esac
+
+         # Now compile the dynamic symbol file.
+         $show "(cd $output_objdir && $LTCC  $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
+         $run eval '(cd $output_objdir && $LTCC  $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
+
+         # Clean up the generated files.
+         $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T"
+         $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T"
+
+         # Transform the symbol file into the correct name.
+          case $host in
+          *cygwin* | *mingw* )
+            if test -f "$output_objdir/${outputname}.def" ; then
+              compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP`
+              finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP`
+            else
+              compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
+              finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
+             fi
+            ;;
+          * )
+            compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
+            finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
+            ;;
+          esac
+         ;;
+       *)
+         $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
+         exit $EXIT_FAILURE
+         ;;
+       esac
+      else
+       # We keep going just in case the user didn't refer to
+       # lt_preloaded_symbols.  The linker will fail if global_symbol_pipe
+       # really was required.
+
+       # Nullify the symbol file.
+       compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP`
+       finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP`
+      fi
+
+      if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
+       # Replace the output file specification.
+       compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$output"'%g' | $NL2SP`
+       link_command="$compile_command$compile_rpath"
+
+       # We have no uninstalled library dependencies, so finalize right now.
+       $show "$link_command"
+       $run eval "$link_command"
+       exit_status=$?
+
+       # Delete the generated files.
+       if test -n "$dlsyms"; then
+         $show "$rm $output_objdir/${outputname}S.${objext}"
+         $run $rm "$output_objdir/${outputname}S.${objext}"
+       fi
+
+       exit $exit_status
+      fi
+
+      if test -n "$shlibpath_var"; then
+       # We should set the shlibpath_var
+       rpath=
+       for dir in $temp_rpath; do
+         case $dir in
+         [\\/]* | [A-Za-z]:[\\/]*)
+           # Absolute path.
+           rpath="$rpath$dir:"
+           ;;
+         *)
+           # Relative path: add a thisdir entry.
+           rpath="$rpath\$thisdir/$dir:"
+           ;;
+         esac
+       done
+       temp_rpath="$rpath"
+      fi
+
+      if test -n "$compile_shlibpath$finalize_shlibpath"; then
+       compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
+      fi
+      if test -n "$finalize_shlibpath"; then
+       finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
+      fi
+
+      compile_var=
+      finalize_var=
+      if test -n "$runpath_var"; then
+       if test -n "$perm_rpath"; then
+         # We should set the runpath_var.
+         rpath=
+         for dir in $perm_rpath; do
+           rpath="$rpath$dir:"
+         done
+         compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
+       fi
+       if test -n "$finalize_perm_rpath"; then
+         # We should set the runpath_var.
+         rpath=
+         for dir in $finalize_perm_rpath; do
+           rpath="$rpath$dir:"
+         done
+         finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
+       fi
+      fi
+
+      if test "$no_install" = yes; then
+       # We don't need to create a wrapper script.
+       link_command="$compile_var$compile_command$compile_rpath"
+       # Replace the output file specification.
+       link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+       # Delete the old output file.
+       $run $rm $output
+       # Link the executable and exit
+       $show "$link_command"
+       $run eval "$link_command" || exit $?
+       exit $EXIT_SUCCESS
+      fi
+
+      if test "$hardcode_action" = relink; then
+       # Fast installation is not supported
+       link_command="$compile_var$compile_command$compile_rpath"
+       relink_command="$finalize_var$finalize_command$finalize_rpath"
+
+       $echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2
+       $echo "$modename: \`$output' will be relinked during installation" 1>&2
+      else
+       if test "$fast_install" != no; then
+         link_command="$finalize_var$compile_command$finalize_rpath"
+         if test "$fast_install" = yes; then
+           relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $SP2NL | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g' | $NL2SP`
+         else
+           # fast_install is set to needless
+           relink_command=
+         fi
+       else
+         link_command="$compile_var$compile_command$compile_rpath"
+         relink_command="$finalize_var$finalize_command$finalize_rpath"
+       fi
+      fi
+
+      # Replace the output file specification.
+      link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
+
+      # Delete the old output files.
+      $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname
+
+      $show "$link_command"
+      $run eval "$link_command" || exit $?
+
+      # Now create the wrapper script.
+      $show "creating $output"
+
+      # Quote the relink command for shipping.
+      if test -n "$relink_command"; then
+       # Preserve any variables that may affect compiler behavior
+       for var in $variables_saved_for_relink; do
+         if eval test -z \"\${$var+set}\"; then
+           relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
+         elif eval var_value=\$$var; test -z "$var_value"; then
+           relink_command="$var=; export $var; $relink_command"
+         else
+           var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
+           relink_command="$var=\"$var_value\"; export $var; $relink_command"
+         fi
+       done
+       relink_command="(cd `pwd`; $relink_command)"
+       relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP`
+      fi
+
+      # Quote $echo for shipping.
+      if test "X$echo" = "X$SHELL $progpath --fallback-echo"; then
+       case $progpath in
+       [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";;
+       *) qecho="$SHELL `pwd`/$progpath --fallback-echo";;
+       esac
+       qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"`
+      else
+       qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"`
+      fi
+
+      # Only actually do things if our run command is non-null.
+      if test -z "$run"; then
+       # win32 will think the script is a binary if it has
+       # a .exe suffix, so we strip it off here.
+       case $output in
+         *.exe) output=`$echo $output|${SED} 's,.exe$,,'` ;;
+       esac
+       # test for cygwin because mv fails w/o .exe extensions
+       case $host in
+         *cygwin*)
+           exeext=.exe
+           outputname=`$echo $outputname|${SED} 's,.exe$,,'` ;;
+         *) exeext= ;;
+       esac
+       case $host in
+         *cygwin* | *mingw* )
+            output_name=`basename $output`
+            output_path=`dirname $output`
+            cwrappersource="$output_path/$objdir/lt-$output_name.c"
+            cwrapper="$output_path/$output_name.exe"
+            $rm $cwrappersource $cwrapper
+            trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
+
+           cat > $cwrappersource <<EOF
+
+/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
+   Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
+
+   The $output program cannot be directly executed until all the libtool
+   libraries that it depends on are installed.
+
+   This wrapper executable should never be moved out of the build directory.
+   If it is, it will not operate correctly.
+
+   Currently, it simply execs the wrapper *script* "/bin/sh $output",
+   but could eventually absorb all of the scripts functionality and
+   exec $objdir/$outputname directly.
+*/
+EOF
+           cat >> $cwrappersource<<"EOF"
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <malloc.h>
+#include <stdarg.h>
+#include <assert.h>
+#include <string.h>
+#include <ctype.h>
+#include <sys/stat.h>
+
+#if defined(PATH_MAX)
+# define LT_PATHMAX PATH_MAX
+#elif defined(MAXPATHLEN)
+# define LT_PATHMAX MAXPATHLEN
+#else
+# define LT_PATHMAX 1024
+#endif
+
+#ifndef DIR_SEPARATOR
+# define DIR_SEPARATOR '/'
+# define PATH_SEPARATOR ':'
+#endif
+
+#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
+  defined (__OS2__)
+# define HAVE_DOS_BASED_FILE_SYSTEM
+# ifndef DIR_SEPARATOR_2
+#  define DIR_SEPARATOR_2 '\\'
+# endif
+# ifndef PATH_SEPARATOR_2
+#  define PATH_SEPARATOR_2 ';'
+# endif
+#endif
+
+#ifndef DIR_SEPARATOR_2
+# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
+#else /* DIR_SEPARATOR_2 */
+# define IS_DIR_SEPARATOR(ch) \
+        (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
+#endif /* DIR_SEPARATOR_2 */
+
+#ifndef PATH_SEPARATOR_2
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
+#else /* PATH_SEPARATOR_2 */
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
+#endif /* PATH_SEPARATOR_2 */
+
+#define XMALLOC(type, num)      ((type *) xmalloc ((num) * sizeof(type)))
+#define XFREE(stale) do { \
+  if (stale) { free ((void *) stale); stale = 0; } \
+} while (0)
+
+/* -DDEBUG is fairly common in CFLAGS.  */
+#undef DEBUG
+#if defined DEBUGWRAPPER
+# define DEBUG(format, ...) fprintf(stderr, format, __VA_ARGS__)
+#else
+# define DEBUG(format, ...)
+#endif
+
+const char *program_name = NULL;
+
+void * xmalloc (size_t num);
+char * xstrdup (const char *string);
+const char * base_name (const char *name);
+char * find_executable(const char *wrapper);
+int    check_executable(const char *path);
+char * strendzap(char *str, const char *pat);
+void lt_fatal (const char *message, ...);
+
+int
+main (int argc, char *argv[])
+{
+  char **newargz;
+  int i;
+
+  program_name = (char *) xstrdup (base_name (argv[0]));
+  DEBUG("(main) argv[0]      : %s\n",argv[0]);
+  DEBUG("(main) program_name : %s\n",program_name);
+  newargz = XMALLOC(char *, argc+2);
+EOF
+
+            cat >> $cwrappersource <<EOF
+  newargz[0] = (char *) xstrdup("$SHELL");
+EOF
+
+            cat >> $cwrappersource <<"EOF"
+  newargz[1] = find_executable(argv[0]);
+  if (newargz[1] == NULL)
+    lt_fatal("Couldn't find %s", argv[0]);
+  DEBUG("(main) found exe at : %s\n",newargz[1]);
+  /* we know the script has the same name, without the .exe */
+  /* so make sure newargz[1] doesn't end in .exe */
+  strendzap(newargz[1],".exe");
+  for (i = 1; i < argc; i++)
+    newargz[i+1] = xstrdup(argv[i]);
+  newargz[argc+1] = NULL;
+
+  for (i=0; i<argc+1; i++)
+  {
+    DEBUG("(main) newargz[%d]   : %s\n",i,newargz[i]);
+    ;
+  }
+
+EOF
+
+            case $host_os in
+              mingw*)
+                cat >> $cwrappersource <<EOF
+  execv("$SHELL",(char const **)newargz);
+EOF
+              ;;
+              *)
+                cat >> $cwrappersource <<EOF
+  execv("$SHELL",newargz);
+EOF
+              ;;
+            esac
+
+            cat >> $cwrappersource <<"EOF"
+  return 127;
+}
+
+void *
+xmalloc (size_t num)
+{
+  void * p = (void *) malloc (num);
+  if (!p)
+    lt_fatal ("Memory exhausted");
+
+  return p;
+}
+
+char *
+xstrdup (const char *string)
+{
+  return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL
+;
+}
+
+const char *
+base_name (const char *name)
+{
+  const char *base;
+
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+  /* Skip over the disk name in MSDOS pathnames. */
+  if (isalpha ((unsigned char)name[0]) && name[1] == ':')
+    name += 2;
+#endif
+
+  for (base = name; *name; name++)
+    if (IS_DIR_SEPARATOR (*name))
+      base = name + 1;
+  return base;
+}
+
+int
+check_executable(const char * path)
+{
+  struct stat st;
+
+  DEBUG("(check_executable)  : %s\n", path ? (*path ? path : "EMPTY!") : "NULL!");
+  if ((!path) || (!*path))
+    return 0;
+
+  if ((stat (path, &st) >= 0) &&
+      (
+        /* MinGW & native WIN32 do not support S_IXOTH or S_IXGRP */
+#if defined (S_IXOTH)
+       ((st.st_mode & S_IXOTH) == S_IXOTH) ||
+#endif
+#if defined (S_IXGRP)
+       ((st.st_mode & S_IXGRP) == S_IXGRP) ||
+#endif
+       ((st.st_mode & S_IXUSR) == S_IXUSR))
+      )
+    return 1;
+  else
+    return 0;
+}
+
+/* Searches for the full path of the wrapper.  Returns
+   newly allocated full path name if found, NULL otherwise */
+char *
+find_executable (const char* wrapper)
+{
+  int has_slash = 0;
+  const char* p;
+  const char* p_next;
+  /* static buffer for getcwd */
+  char tmp[LT_PATHMAX + 1];
+  int tmp_len;
+  char* concat_name;
+
+  DEBUG("(find_executable)  : %s\n", wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!");
+
+  if ((wrapper == NULL) || (*wrapper == '\0'))
+    return NULL;
+
+  /* Absolute path? */
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+  if (isalpha ((unsigned char)wrapper[0]) && wrapper[1] == ':')
+  {
+    concat_name = xstrdup (wrapper);
+    if (check_executable(concat_name))
+      return concat_name;
+    XFREE(concat_name);
+  }
+  else
+  {
+#endif
+    if (IS_DIR_SEPARATOR (wrapper[0]))
+    {
+      concat_name = xstrdup (wrapper);
+      if (check_executable(concat_name))
+        return concat_name;
+      XFREE(concat_name);
+    }
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+  }
+#endif
+
+  for (p = wrapper; *p; p++)
+    if (*p == '/')
+    {
+      has_slash = 1;
+      break;
+    }
+  if (!has_slash)
+  {
+    /* no slashes; search PATH */
+    const char* path = getenv ("PATH");
+    if (path != NULL)
+    {
+      for (p = path; *p; p = p_next)
+      {
+        const char* q;
+        size_t p_len;
+        for (q = p; *q; q++)
+          if (IS_PATH_SEPARATOR(*q))
+            break;
+        p_len = q - p;
+        p_next = (*q == '\0' ? q : q + 1);
+        if (p_len == 0)
+        {
+          /* empty path: current directory */
+          if (getcwd (tmp, LT_PATHMAX) == NULL)
+            lt_fatal ("getcwd failed");
+          tmp_len = strlen(tmp);
+          concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
+          memcpy (concat_name, tmp, tmp_len);
+          concat_name[tmp_len] = '/';
+          strcpy (concat_name + tmp_len + 1, wrapper);
+        }
+        else
+        {
+          concat_name = XMALLOC(char, p_len + 1 + strlen(wrapper) + 1);
+          memcpy (concat_name, p, p_len);
+          concat_name[p_len] = '/';
+          strcpy (concat_name + p_len + 1, wrapper);
+        }
+        if (check_executable(concat_name))
+          return concat_name;
+        XFREE(concat_name);
+      }
+    }
+    /* not found in PATH; assume curdir */
+  }
+  /* Relative path | not found in path: prepend cwd */
+  if (getcwd (tmp, LT_PATHMAX) == NULL)
+    lt_fatal ("getcwd failed");
+  tmp_len = strlen(tmp);
+  concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
+  memcpy (concat_name, tmp, tmp_len);
+  concat_name[tmp_len] = '/';
+  strcpy (concat_name + tmp_len + 1, wrapper);
+
+  if (check_executable(concat_name))
+    return concat_name;
+  XFREE(concat_name);
+  return NULL;
+}
+
+char *
+strendzap(char *str, const char *pat)
+{
+  size_t len, patlen;
+
+  assert(str != NULL);
+  assert(pat != NULL);
+
+  len = strlen(str);
+  patlen = strlen(pat);
+
+  if (patlen <= len)
+  {
+    str += len - patlen;
+    if (strcmp(str, pat) == 0)
+      *str = '\0';
+  }
+  return str;
+}
+
+static void
+lt_error_core (int exit_status, const char * mode,
+          const char * message, va_list ap)
+{
+  fprintf (stderr, "%s: %s: ", program_name, mode);
+  vfprintf (stderr, message, ap);
+  fprintf (stderr, ".\n");
+
+  if (exit_status >= 0)
+    exit (exit_status);
+}
+
+void
+lt_fatal (const char *message, ...)
+{
+  va_list ap;
+  va_start (ap, message);
+  lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
+  va_end (ap);
+}
+EOF
+          # we should really use a build-platform specific compiler
+          # here, but OTOH, the wrappers (shell script and this C one)
+          # are only useful if you want to execute the "real" binary.
+          # Since the "real" binary is built for $host, then this
+          # wrapper might as well be built for $host, too.
+          $run $LTCC $LTCFLAGS -s -o $cwrapper $cwrappersource
+          ;;
+        esac
+        $rm $output
+        trap "$rm $output; exit $EXIT_FAILURE" 1 2 15
+
+       $echo > $output "\
+#! $SHELL
+
+# $output - temporary wrapper script for $objdir/$outputname
+# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
+#
+# The $output program cannot be directly executed until all the libtool
+# libraries that it depends on are installed.
+#
+# This wrapper script should never be moved out of the build directory.
+# If it is, it will not operate correctly.
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed='${SED} -e 1s/^X//'
+sed_quote_subst='$sed_quote_subst'
+
+# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE).
+if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '\${1+\"\$@\"}'='\"\$@\"'
+  setopt NO_GLOB_SUBST
+else
+  case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
+fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+relink_command=\"$relink_command\"
+
+# This environment variable determines our operation mode.
+if test \"\$libtool_install_magic\" = \"$magic\"; then
+  # install mode needs the following variable:
+  notinst_deplibs='$notinst_deplibs'
+else
+  # When we are sourced in execute mode, \$file and \$echo are already set.
+  if test \"\$libtool_execute_magic\" != \"$magic\"; then
+    echo=\"$qecho\"
+    file=\"\$0\"
+    # Make sure echo works.
+    if test \"X\$1\" = X--no-reexec; then
+      # Discard the --no-reexec flag, and continue.
+      shift
+    elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then
+      # Yippee, \$echo works!
+      :
+    else
+      # Restart under the correct shell, and then maybe \$echo will work.
+      exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
+    fi
+  fi\
+"
+       $echo >> $output "\
+
+  # Find the directory that this script lives in.
+  thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
+  test \"x\$thisdir\" = \"x\$file\" && thisdir=.
+
+  # Follow symbolic links until we get to the real thisdir.
+  file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
+  while test -n \"\$file\"; do
+    destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
+
+    # If there was a directory component, then change thisdir.
+    if test \"x\$destdir\" != \"x\$file\"; then
+      case \"\$destdir\" in
+      [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
+      *) thisdir=\"\$thisdir/\$destdir\" ;;
+      esac
+    fi
+
+    file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
+    file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
+  done
+
+  # Try to get the absolute directory name.
+  absdir=\`cd \"\$thisdir\" && pwd\`
+  test -n \"\$absdir\" && thisdir=\"\$absdir\"
+"
+
+       if test "$fast_install" = yes; then
+         $echo >> $output "\
+  program=lt-'$outputname'$exeext
+  progdir=\"\$thisdir/$objdir\"
+
+  if test ! -f \"\$progdir/\$program\" || \\
+     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
+       test \"X\$file\" != \"X\$progdir/\$program\"; }; then
+
+    file=\"\$\$-\$program\"
+
+    if test ! -d \"\$progdir\"; then
+      $mkdir \"\$progdir\"
+    else
+      $rm \"\$progdir/\$file\"
+    fi"
+
+         $echo >> $output "\
+
+    # relink executable if necessary
+    if test -n \"\$relink_command\"; then
+      if relink_command_output=\`eval \$relink_command 2>&1\`; then :
+      else
+       $echo \"\$relink_command_output\" >&2
+       $rm \"\$progdir/\$file\"
+       exit $EXIT_FAILURE
+      fi
+    fi
+
+    $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
+    { $rm \"\$progdir/\$program\";
+      $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; }
+    $rm \"\$progdir/\$file\"
+  fi"
+       else
+         $echo >> $output "\
+  program='$outputname'
+  progdir=\"\$thisdir/$objdir\"
+"
+       fi
+
+       $echo >> $output "\
+
+  if test -f \"\$progdir/\$program\"; then"
+
+       # Export our shlibpath_var if we have one.
+       if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+         $echo >> $output "\
+    # Add our own library path to $shlibpath_var
+    $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
+
+    # Some systems cannot cope with colon-terminated $shlibpath_var
+    # The second colon is a workaround for a bug in BeOS R4 sed
+    $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
+
+    export $shlibpath_var
+"
+       fi
+
+       # fixup the dll searchpath if we need to.
+       if test -n "$dllsearchpath"; then
+         $echo >> $output "\
+    # Add the dll search path components to the executable PATH
+    PATH=$dllsearchpath:\$PATH
+"
+       fi
+
+       $echo >> $output "\
+    if test \"\$libtool_execute_magic\" != \"$magic\"; then
+      # Run the actual program with our arguments.
+"
+       case $host in
+       # Backslashes separate directories on plain windows
+       *-*-mingw | *-*-os2*)
+         $echo >> $output "\
+      exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
+"
+         ;;
+
+       *)
+         $echo >> $output "\
+      exec \"\$progdir/\$program\" \${1+\"\$@\"}
+"
+         ;;
+       esac
+       $echo >> $output "\
+      \$echo \"\$0: cannot exec \$program \$*\"
+      exit $EXIT_FAILURE
+    fi
+  else
+    # The program doesn't exist.
+    \$echo \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
+    \$echo \"This script is just a wrapper for \$program.\" 1>&2
+    $echo \"See the $PACKAGE documentation for more information.\" 1>&2
+    exit $EXIT_FAILURE
+  fi
+fi\
+"
+       chmod +x $output
+      fi
+      exit $EXIT_SUCCESS
+      ;;
+    esac
+
+    # See if we need to build an old-fashioned archive.
+    for oldlib in $oldlibs; do
+
+      if test "$build_libtool_libs" = convenience; then
+       oldobjs="$libobjs_save"
+       addlibs="$convenience"
+       build_libtool_libs=no
+      else
+       if test "$build_libtool_libs" = module; then
+         oldobjs="$libobjs_save"
+         build_libtool_libs=no
+       else
+         oldobjs="$old_deplibs $non_pic_objects"
+       fi
+       addlibs="$old_convenience"
+      fi
+
+      if test -n "$addlibs"; then
+       gentop="$output_objdir/${outputname}x"
+       generated="$generated $gentop"
+
+       func_extract_archives $gentop $addlibs
+       oldobjs="$oldobjs $func_extract_archives_result"
+      fi
+
+      # Do each command in the archive commands.
+      if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
+       cmds=$old_archive_from_new_cmds
+      else
+       # POSIX demands no paths to be encoded in archives.  We have
+       # to avoid creating archives with duplicate basenames if we
+       # might have to extract them afterwards, e.g., when creating a
+       # static archive out of a convenience library, or when linking
+       # the entirety of a libtool archive into another (currently
+       # not supported by libtool).
+       if (for obj in $oldobjs
+           do
+             $echo "X$obj" | $Xsed -e 's%^.*/%%'
+           done | sort | sort -uc >/dev/null 2>&1); then
+         :
+       else
+         $echo "copying selected object files to avoid basename conflicts..."
+
+         if test -z "$gentop"; then
+           gentop="$output_objdir/${outputname}x"
+           generated="$generated $gentop"
+
+           $show "${rm}r $gentop"
+           $run ${rm}r "$gentop"
+           $show "$mkdir $gentop"
+           $run $mkdir "$gentop"
+           exit_status=$?
+           if test "$exit_status" -ne 0 && test ! -d "$gentop"; then
+             exit $exit_status
+           fi
+         fi
+
+         save_oldobjs=$oldobjs
+         oldobjs=
+         counter=1
+         for obj in $save_oldobjs
+         do
+           objbase=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
+           case " $oldobjs " in
+           " ") oldobjs=$obj ;;
+           *[\ /]"$objbase "*)
+             while :; do
+               # Make sure we don't pick an alternate name that also
+               # overlaps.
+               newobj=lt$counter-$objbase
+               counter=`expr $counter + 1`
+               case " $oldobjs " in
+               *[\ /]"$newobj "*) ;;
+               *) if test ! -f "$gentop/$newobj"; then break; fi ;;
+               esac
+             done
+             $show "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
+             $run ln "$obj" "$gentop/$newobj" ||
+             $run cp "$obj" "$gentop/$newobj"
+             oldobjs="$oldobjs $gentop/$newobj"
+             ;;
+           *) oldobjs="$oldobjs $obj" ;;
+           esac
+         done
+       fi
+
+       eval cmds=\"$old_archive_cmds\"
+
+       if len=`expr "X$cmds" : ".*"` &&
+            test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+         cmds=$old_archive_cmds
+       else
+         # the command line is too long to link in one step, link in parts
+         $echo "using piecewise archive linking..."
+         save_RANLIB=$RANLIB
+         RANLIB=:
+         objlist=
+         concat_cmds=
+         save_oldobjs=$oldobjs
+
+         # Is there a better way of finding the last object in the list?
+         for obj in $save_oldobjs
+         do
+           last_oldobj=$obj
+         done
+         for obj in $save_oldobjs
+         do
+           oldobjs="$objlist $obj"
+           objlist="$objlist $obj"
+           eval test_cmds=\"$old_archive_cmds\"
+           if len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
+              test "$len" -le "$max_cmd_len"; then
+             :
+           else
+             # the above command should be used before it gets too long
+             oldobjs=$objlist
+             if test "$obj" = "$last_oldobj" ; then
+               RANLIB=$save_RANLIB
+             fi
+             test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+             eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
+             objlist=
+           fi
+         done
+         RANLIB=$save_RANLIB
+         oldobjs=$objlist
+         if test "X$oldobjs" = "X" ; then
+           eval cmds=\"\$concat_cmds\"
+         else
+           eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
+         fi
+       fi
+      fi
+      save_ifs="$IFS"; IFS='~'
+      for cmd in $cmds; do
+        eval cmd=\"$cmd\"
+       IFS="$save_ifs"
+       $show "$cmd"
+       $run eval "$cmd" || exit $?
+      done
+      IFS="$save_ifs"
+    done
+
+    if test -n "$generated"; then
+      $show "${rm}r$generated"
+      $run ${rm}r$generated
+    fi
+
+    # Now create the libtool archive.
+    case $output in
+    *.la)
+      old_library=
+      test "$build_old_libs" = yes && old_library="$libname.$libext"
+      $show "creating $output"
+
+      # Preserve any variables that may affect compiler behavior
+      for var in $variables_saved_for_relink; do
+       if eval test -z \"\${$var+set}\"; then
+         relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
+       elif eval var_value=\$$var; test -z "$var_value"; then
+         relink_command="$var=; export $var; $relink_command"
+       else
+         var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
+         relink_command="$var=\"$var_value\"; export $var; $relink_command"
+       fi
+      done
+      # Quote the link command for shipping.
+      relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
+      relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP`
+      if test "$hardcode_automatic" = yes ; then
+       relink_command=
+      fi
+
+
+      # Only create the output if not a dry run.
+      if test -z "$run"; then
+       for installed in no yes; do
+         if test "$installed" = yes; then
+           if test -z "$install_libdir"; then
+             break
+           fi
+           output="$output_objdir/$outputname"i
+           # Replace all uninstalled libtool libraries with the installed ones
+           newdependency_libs=
+           for deplib in $dependency_libs; do
+             case $deplib in
+             *.la)
+               name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'`
+               eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+               if test -z "$libdir"; then
+                 $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
+                 exit $EXIT_FAILURE
+               fi
+               newdependency_libs="$newdependency_libs $libdir/$name"
+               ;;
+             *) newdependency_libs="$newdependency_libs $deplib" ;;
+             esac
+           done
+           dependency_libs="$newdependency_libs"
+           newdlfiles=
+           for lib in $dlfiles; do
+             name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
+             eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+             if test -z "$libdir"; then
+               $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+               exit $EXIT_FAILURE
+             fi
+             newdlfiles="$newdlfiles $libdir/$name"
+           done
+           dlfiles="$newdlfiles"
+           newdlprefiles=
+           for lib in $dlprefiles; do
+             name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
+             eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+             if test -z "$libdir"; then
+               $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+               exit $EXIT_FAILURE
+             fi
+             newdlprefiles="$newdlprefiles $libdir/$name"
+           done
+           dlprefiles="$newdlprefiles"
+         else
+           newdlfiles=
+           for lib in $dlfiles; do
+             case $lib in
+               [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+               *) abs=`pwd`"/$lib" ;;
+             esac
+             newdlfiles="$newdlfiles $abs"
+           done
+           dlfiles="$newdlfiles"
+           newdlprefiles=
+           for lib in $dlprefiles; do
+             case $lib in
+               [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+               *) abs=`pwd`"/$lib" ;;
+             esac
+             newdlprefiles="$newdlprefiles $abs"
+           done
+           dlprefiles="$newdlprefiles"
+         fi
+         $rm $output
+         # place dlname in correct position for cygwin
+         tdlname=$dlname
+         case $host,$output,$installed,$module,$dlname in
+           *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
+         esac
+         $echo > $output "\
+# $outputname - a libtool library file
+# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# The name that we can dlopen(3).
+dlname='$tdlname'
+
+# Names of this library.
+library_names='$library_names'
+
+# The name of the static archive.
+old_library='$old_library'
+
+# Libraries that this one depends upon.
+dependency_libs='$dependency_libs'
+
+# Version information for $libname.
+current=$current
+age=$age
+revision=$revision
+
+# Is this an already installed library?
+installed=$installed
+
+# Should we warn about portability when linking against -modules?
+shouldnotlink=$module
+
+# Files to dlopen/dlpreopen
+dlopen='$dlfiles'
+dlpreopen='$dlprefiles'
+
+# Directory that this library needs to be installed in:
+libdir='$install_libdir'"
+         if test "$installed" = no && test "$need_relink" = yes; then
+           $echo >> $output "\
+relink_command=\"$relink_command\""
+         fi
+       done
+      fi
+
+      # Do a symbolic link so that the libtool archive can be found in
+      # LD_LIBRARY_PATH before the program is installed.
+      $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)"
+      $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $?
+      ;;
+    esac
+    exit $EXIT_SUCCESS
+    ;;
+
+  # libtool install mode
+  install)
+    modename="$modename: install"
+
+    # There may be an optional sh(1) argument at the beginning of
+    # install_prog (especially on Windows NT).
+    if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
+       # Allow the use of GNU shtool's install command.
+       $echo "X$nonopt" | grep shtool > /dev/null; then
+      # Aesthetically quote it.
+      arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
+      case $arg in
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \    ]*|*]*|"")
+       arg="\"$arg\""
+       ;;
+      esac
+      install_prog="$arg "
+      arg="$1"
+      shift
+    else
+      install_prog=
+      arg=$nonopt
+    fi
+
+    # The real first argument should be the name of the installation program.
+    # Aesthetically quote it.
+    arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+    case $arg in
+    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \      ]*|*]*|"")
+      arg="\"$arg\""
+      ;;
+    esac
+    install_prog="$install_prog$arg"
+
+    # We need to accept at least all the BSD install flags.
+    dest=
+    files=
+    opts=
+    prev=
+    install_type=
+    isdir=no
+    stripme=
+    for arg
+    do
+      if test -n "$dest"; then
+       files="$files $dest"
+       dest=$arg
+       continue
+      fi
+
+      case $arg in
+      -d) isdir=yes ;;
+      -f) 
+       case " $install_prog " in
+       *[\\\ /]cp\ *) ;;
+       *) prev=$arg ;;
+       esac
+       ;;
+      -g | -m | -o) prev=$arg ;;
+      -s)
+       stripme=" -s"
+       continue
+       ;;
+      -*)
+       ;;
+      *)
+       # If the previous option needed an argument, then skip it.
+       if test -n "$prev"; then
+         prev=
+       else
+         dest=$arg
+         continue
+       fi
+       ;;
+      esac
+
+      # Aesthetically quote the argument.
+      arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+      case $arg in
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \    ]*|*]*|"")
+       arg="\"$arg\""
+       ;;
+      esac
+      install_prog="$install_prog $arg"
+    done
+
+    if test -z "$install_prog"; then
+      $echo "$modename: you must specify an install program" 1>&2
+      $echo "$help" 1>&2
+      exit $EXIT_FAILURE
+    fi
+
+    if test -n "$prev"; then
+      $echo "$modename: the \`$prev' option requires an argument" 1>&2
+      $echo "$help" 1>&2
+      exit $EXIT_FAILURE
+    fi
+
+    if test -z "$files"; then
+      if test -z "$dest"; then
+       $echo "$modename: no file or destination specified" 1>&2
+      else
+       $echo "$modename: you must specify a destination" 1>&2
+      fi
+      $echo "$help" 1>&2
+      exit $EXIT_FAILURE
+    fi
+
+    # Strip any trailing slash from the destination.
+    dest=`$echo "X$dest" | $Xsed -e 's%/$%%'`
+
+    # Check to see that the destination is a directory.
+    test -d "$dest" && isdir=yes
+    if test "$isdir" = yes; then
+      destdir="$dest"
+      destname=
+    else
+      destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'`
+      test "X$destdir" = "X$dest" && destdir=.
+      destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'`
+
+      # Not a directory, so check to see that there is only one file specified.
+      set dummy $files
+      if test "$#" -gt 2; then
+       $echo "$modename: \`$dest' is not a directory" 1>&2
+       $echo "$help" 1>&2
+       exit $EXIT_FAILURE
+      fi
+    fi
+    case $destdir in
+    [\\/]* | [A-Za-z]:[\\/]*) ;;
+    *)
+      for file in $files; do
+       case $file in
+       *.lo) ;;
+       *)
+         $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2
+         $echo "$help" 1>&2
+         exit $EXIT_FAILURE
+         ;;
+       esac
+      done
+      ;;
+    esac
+
+    # This variable tells wrapper scripts just to set variables rather
+    # than running their programs.
+    libtool_install_magic="$magic"
+
+    staticlibs=
+    future_libdirs=
+    current_libdirs=
+    for file in $files; do
+
+      # Do each installation.
+      case $file in
+      *.$libext)
+       # Do the static libraries later.
+       staticlibs="$staticlibs $file"
+       ;;
+
+      *.la)
+       # Check to see that this really is a libtool archive.
+       if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+       else
+         $echo "$modename: \`$file' is not a valid libtool archive" 1>&2
+         $echo "$help" 1>&2
+         exit $EXIT_FAILURE
+       fi
+
+       library_names=
+       old_library=
+       relink_command=
+       # If there is no directory component, then add one.
+       case $file in
+       */* | *\\*) . $file ;;
+       *) . ./$file ;;
+       esac
+
+       # Add the libdir to current_libdirs if it is the destination.
+       if test "X$destdir" = "X$libdir"; then
+         case "$current_libdirs " in
+         *" $libdir "*) ;;
+         *) current_libdirs="$current_libdirs $libdir" ;;
+         esac
+       else
+         # Note the libdir as a future libdir.
+         case "$future_libdirs " in
+         *" $libdir "*) ;;
+         *) future_libdirs="$future_libdirs $libdir" ;;
+         esac
+       fi
+
+       dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/
+       test "X$dir" = "X$file/" && dir=
+       dir="$dir$objdir"
+
+       if test -n "$relink_command"; then
+         # Determine the prefix the user has applied to our future dir.
+         inst_prefix_dir=`$echo "$destdir" | $SED "s%$libdir\$%%"`
+
+         # Don't allow the user to place us outside of our expected
+         # location b/c this prevents finding dependent libraries that
+         # are installed to the same prefix.
+         # At present, this check doesn't affect windows .dll's that
+         # are installed into $libdir/../bin (currently, that works fine)
+         # but it's something to keep an eye on.
+         if test "$inst_prefix_dir" = "$destdir"; then
+           $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2
+           exit $EXIT_FAILURE
+         fi
+
+         if test -n "$inst_prefix_dir"; then
+           # Stick the inst_prefix_dir data into the link command.
+           relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%" | $NL2SP`
+         else
+           relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%%" | $NL2SP`
+         fi
+
+         $echo "$modename: warning: relinking \`$file'" 1>&2
+         $show "$relink_command"
+         if $run eval "$relink_command"; then :
+         else
+           $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
+           exit $EXIT_FAILURE
+         fi
+       fi
+
+       # See the names of the shared library.
+       set dummy $library_names
+       if test -n "$2"; then
+         realname="$2"
+         shift
+         shift
+
+         srcname="$realname"
+         test -n "$relink_command" && srcname="$realname"T
+
+         # Install the shared library and build the symlinks.
+         $show "$install_prog $dir/$srcname $destdir/$realname"
+         $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $?
+         if test -n "$stripme" && test -n "$striplib"; then
+           $show "$striplib $destdir/$realname"
+           $run eval "$striplib $destdir/$realname" || exit $?
+         fi
+
+         if test "$#" -gt 0; then
+           # Delete the old symlinks, and create new ones.
+           # Try `ln -sf' first, because the `ln' binary might depend on
+           # the symlink we replace!  Solaris /bin/ln does not understand -f,
+           # so we also need to try rm && ln -s.
+           for linkname
+           do
+             if test "$linkname" != "$realname"; then
+                $show "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"
+                $run eval "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"
+             fi
+           done
+         fi
+
+         # Do each command in the postinstall commands.
+         lib="$destdir/$realname"
+         cmds=$postinstall_cmds
+         save_ifs="$IFS"; IFS='~'
+         for cmd in $cmds; do
+           IFS="$save_ifs"
+           eval cmd=\"$cmd\"
+           $show "$cmd"
+           $run eval "$cmd" || {
+             lt_exit=$?
+
+             # Restore the uninstalled library and exit
+             if test "$mode" = relink; then
+               $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'
+             fi
+
+             exit $lt_exit
+           }
+         done
+         IFS="$save_ifs"
+       fi
+
+       # Install the pseudo-library for information purposes.
+       name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+       instname="$dir/$name"i
+       $show "$install_prog $instname $destdir/$name"
+       $run eval "$install_prog $instname $destdir/$name" || exit $?
+
+       # Maybe install the static library, too.
+       test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
+       ;;
+
+      *.lo)
+       # Install (i.e. copy) a libtool object.
+
+       # Figure out destination file name, if it wasn't already specified.
+       if test -n "$destname"; then
+         destfile="$destdir/$destname"
+       else
+         destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+         destfile="$destdir/$destfile"
+       fi
+
+       # Deduce the name of the destination old-style object file.
+       case $destfile in
+       *.lo)
+         staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"`
+         ;;
+       *.$objext)
+         staticdest="$destfile"
+         destfile=
+         ;;
+       *)
+         $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2
+         $echo "$help" 1>&2
+         exit $EXIT_FAILURE
+         ;;
+       esac
+
+       # Install the libtool object if requested.
+       if test -n "$destfile"; then
+         $show "$install_prog $file $destfile"
+         $run eval "$install_prog $file $destfile" || exit $?
+       fi
+
+       # Install the old object if enabled.
+       if test "$build_old_libs" = yes; then
+         # Deduce the name of the old-style object file.
+         staticobj=`$echo "X$file" | $Xsed -e "$lo2o"`
+
+         $show "$install_prog $staticobj $staticdest"
+         $run eval "$install_prog \$staticobj \$staticdest" || exit $?
+       fi
+       exit $EXIT_SUCCESS
+       ;;
+
+      *)
+       # Figure out destination file name, if it wasn't already specified.
+       if test -n "$destname"; then
+         destfile="$destdir/$destname"
+       else
+         destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+         destfile="$destdir/$destfile"
+       fi
+
+       # If the file is missing, and there is a .exe on the end, strip it
+       # because it is most likely a libtool script we actually want to
+       # install
+       stripped_ext=""
+       case $file in
+         *.exe)
+           if test ! -f "$file"; then
+             file=`$echo $file|${SED} 's,.exe$,,'`
+             stripped_ext=".exe"
+           fi
+           ;;
+       esac
+
+       # Do a test to see if this is really a libtool program.
+       case $host in
+       *cygwin*|*mingw*)
+           wrapper=`$echo $file | ${SED} -e 's,.exe$,,'`
+           ;;
+       *)
+           wrapper=$file
+           ;;
+       esac
+       if (${SED} -e '4q' $wrapper | grep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then
+         notinst_deplibs=
+         relink_command=
+
+         # Note that it is not necessary on cygwin/mingw to append a dot to
+         # foo even if both foo and FILE.exe exist: automatic-append-.exe
+         # behavior happens only for exec(3), not for open(2)!  Also, sourcing
+         # `FILE.' does not work on cygwin managed mounts.
+         #
+         # If there is no directory component, then add one.
+         case $wrapper in
+         */* | *\\*) . ${wrapper} ;;
+         *) . ./${wrapper} ;;
+         esac
+
+         # Check the variables that should have been set.
+         if test -z "$notinst_deplibs"; then
+           $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2
+           exit $EXIT_FAILURE
+         fi
+
+         finalize=yes
+         for lib in $notinst_deplibs; do
+           # Check to see that each library is installed.
+           libdir=
+           if test -f "$lib"; then
+             # If there is no directory component, then add one.
+             case $lib in
+             */* | *\\*) . $lib ;;
+             *) . ./$lib ;;
+             esac
+           fi
+           libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
+           if test -n "$libdir" && test ! -f "$libfile"; then
+             $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2
+             finalize=no
+           fi
+         done
+
+         relink_command=
+         # Note that it is not necessary on cygwin/mingw to append a dot to
+         # foo even if both foo and FILE.exe exist: automatic-append-.exe
+         # behavior happens only for exec(3), not for open(2)!  Also, sourcing
+         # `FILE.' does not work on cygwin managed mounts.
+         #
+         # If there is no directory component, then add one.
+         case $wrapper in
+         */* | *\\*) . ${wrapper} ;;
+         *) . ./${wrapper} ;;
+         esac
+
+         outputname=
+         if test "$fast_install" = no && test -n "$relink_command"; then
+           if test "$finalize" = yes && test -z "$run"; then
+             tmpdir=`func_mktempdir`
+             file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'`
+             outputname="$tmpdir/$file"
+             # Replace the output file specification.
+             relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g' | $NL2SP`
+
+             $show "$relink_command"
+             if $run eval "$relink_command"; then :
+             else
+               $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
+               ${rm}r "$tmpdir"
+               continue
+             fi
+             file="$outputname"
+           else
+             $echo "$modename: warning: cannot relink \`$file'" 1>&2
+           fi
+         else
+           # Install the binary that we compiled earlier.
+           file=`$echo "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
+         fi
+       fi
+
+       # remove .exe since cygwin /usr/bin/install will append another
+       # one anyway 
+       case $install_prog,$host in
+       */usr/bin/install*,*cygwin*)
+         case $file:$destfile in
+         *.exe:*.exe)
+           # this is ok
+           ;;
+         *.exe:*)
+           destfile=$destfile.exe
+           ;;
+         *:*.exe)
+           destfile=`$echo $destfile | ${SED} -e 's,.exe$,,'`
+           ;;
+         esac
+         ;;
+       esac
+       $show "$install_prog$stripme $file $destfile"
+       $run eval "$install_prog\$stripme \$file \$destfile" || exit $?
+       test -n "$outputname" && ${rm}r "$tmpdir"
+       ;;
+      esac
+    done
+
+    for file in $staticlibs; do
+      name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+
+      # Set up the ranlib parameters.
+      oldlib="$destdir/$name"
+
+      $show "$install_prog $file $oldlib"
+      $run eval "$install_prog \$file \$oldlib" || exit $?
+
+      if test -n "$stripme" && test -n "$old_striplib"; then
+       $show "$old_striplib $oldlib"
+       $run eval "$old_striplib $oldlib" || exit $?
+      fi
+
+      # Do each command in the postinstall commands.
+      cmds=$old_postinstall_cmds
+      save_ifs="$IFS"; IFS='~'
+      for cmd in $cmds; do
+       IFS="$save_ifs"
+       eval cmd=\"$cmd\"
+       $show "$cmd"
+       $run eval "$cmd" || exit $?
+      done
+      IFS="$save_ifs"
+    done
+
+    if test -n "$future_libdirs"; then
+      $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2
+    fi
+
+    if test -n "$current_libdirs"; then
+      # Maybe just do a dry run.
+      test -n "$run" && current_libdirs=" -n$current_libdirs"
+      exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
+    else
+      exit $EXIT_SUCCESS
+    fi
+    ;;
+
+  # libtool finish mode
+  finish)
+    modename="$modename: finish"
+    libdirs="$nonopt"
+    admincmds=
+
+    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+      for dir
+      do
+       libdirs="$libdirs $dir"
+      done
+
+      for libdir in $libdirs; do
+       if test -n "$finish_cmds"; then
+         # Do each command in the finish commands.
+         cmds=$finish_cmds
+         save_ifs="$IFS"; IFS='~'
+         for cmd in $cmds; do
+           IFS="$save_ifs"
+           eval cmd=\"$cmd\"
+           $show "$cmd"
+           $run eval "$cmd" || admincmds="$admincmds
+       $cmd"
+         done
+         IFS="$save_ifs"
+       fi
+       if test -n "$finish_eval"; then
+         # Do the single finish_eval.
+         eval cmds=\"$finish_eval\"
+         $run eval "$cmds" || admincmds="$admincmds
+       $cmds"
+       fi
+      done
+    fi
+
+    # Exit here if they wanted silent mode.
+    test "$show" = : && exit $EXIT_SUCCESS
+
+    $echo "X----------------------------------------------------------------------" | $Xsed
+    $echo "Libraries have been installed in:"
+    for libdir in $libdirs; do
+      $echo "   $libdir"
+    done
+    $echo
+    $echo "If you ever happen to want to link against installed libraries"
+    $echo "in a given directory, LIBDIR, you must either use libtool, and"
+    $echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
+    $echo "flag during linking and do at least one of the following:"
+    if test -n "$shlibpath_var"; then
+      $echo "   - add LIBDIR to the \`$shlibpath_var' environment variable"
+      $echo "     during execution"
+    fi
+    if test -n "$runpath_var"; then
+      $echo "   - add LIBDIR to the \`$runpath_var' environment variable"
+      $echo "     during linking"
+    fi
+    if test -n "$hardcode_libdir_flag_spec"; then
+      libdir=LIBDIR
+      eval flag=\"$hardcode_libdir_flag_spec\"
+
+      $echo "   - use the \`$flag' linker flag"
+    fi
+    if test -n "$admincmds"; then
+      $echo "   - have your system administrator run these commands:$admincmds"
+    fi
+    if test -f /etc/ld.so.conf; then
+      $echo "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
+    fi
+    $echo
+    $echo "See any operating system documentation about shared libraries for"
+    $echo "more information, such as the ld(1) and ld.so(8) manual pages."
+    $echo "X----------------------------------------------------------------------" | $Xsed
+    exit $EXIT_SUCCESS
+    ;;
+
+  # libtool execute mode
+  execute)
+    modename="$modename: execute"
+
+    # The first argument is the command name.
+    cmd="$nonopt"
+    if test -z "$cmd"; then
+      $echo "$modename: you must specify a COMMAND" 1>&2
+      $echo "$help"
+      exit $EXIT_FAILURE
+    fi
+
+    # Handle -dlopen flags immediately.
+    for file in $execute_dlfiles; do
+      if test ! -f "$file"; then
+       $echo "$modename: \`$file' is not a file" 1>&2
+       $echo "$help" 1>&2
+       exit $EXIT_FAILURE
+      fi
+
+      dir=
+      case $file in
+      *.la)
+       # Check to see that this really is a libtool archive.
+       if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+       else
+         $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+         $echo "$help" 1>&2
+         exit $EXIT_FAILURE
+       fi
+
+       # Read the libtool library.
+       dlname=
+       library_names=
+
+       # If there is no directory component, then add one.
+       case $file in
+       */* | *\\*) . $file ;;
+       *) . ./$file ;;
+       esac
+
+       # Skip this library if it cannot be dlopened.
+       if test -z "$dlname"; then
+         # Warn if it was a shared library.
+         test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'"
+         continue
+       fi
+
+       dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
+       test "X$dir" = "X$file" && dir=.
+
+       if test -f "$dir/$objdir/$dlname"; then
+         dir="$dir/$objdir"
+       else
+         if test ! -f "$dir/$dlname"; then
+           $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
+           exit $EXIT_FAILURE
+         fi
+       fi
+       ;;
+
+      *.lo)
+       # Just add the directory containing the .lo file.
+       dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
+       test "X$dir" = "X$file" && dir=.
+       ;;
+
+      *)
+       $echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2
+       continue
+       ;;
+      esac
+
+      # Get the absolute pathname.
+      absdir=`cd "$dir" && pwd`
+      test -n "$absdir" && dir="$absdir"
+
+      # Now add the directory to shlibpath_var.
+      if eval "test -z \"\$$shlibpath_var\""; then
+       eval "$shlibpath_var=\"\$dir\""
+      else
+       eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
+      fi
+    done
+
+    # This variable tells wrapper scripts just to set shlibpath_var
+    # rather than running their programs.
+    libtool_execute_magic="$magic"
+
+    # Check if any of the arguments is a wrapper script.
+    args=
+    for file
+    do
+      case $file in
+      -*) ;;
+      *)
+       # Do a test to see if this is really a libtool program.
+       if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+         # If there is no directory component, then add one.
+         case $file in
+         */* | *\\*) . $file ;;
+         *) . ./$file ;;
+         esac
+
+         # Transform arg to wrapped name.
+         file="$progdir/$program"
+       fi
+       ;;
+      esac
+      # Quote arguments (to preserve shell metacharacters).
+      file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"`
+      args="$args \"$file\""
+    done
+
+    if test -z "$run"; then
+      if test -n "$shlibpath_var"; then
+       # Export the shlibpath_var.
+       eval "export $shlibpath_var"
+      fi
+
+      # Restore saved environment variables
+      for lt_var in LANG LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+      do
+       eval "if test \"\${save_$lt_var+set}\" = set; then
+               $lt_var=\$save_$lt_var; export $lt_var
+             fi"
+      done
+
+      # Now prepare to actually exec the command.
+      exec_cmd="\$cmd$args"
+    else
+      # Display what would be done.
+      if test -n "$shlibpath_var"; then
+       eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\""
+       $echo "export $shlibpath_var"
+      fi
+      $echo "$cmd$args"
+      exit $EXIT_SUCCESS
+    fi
+    ;;
+
+  # libtool clean and uninstall mode
+  clean | uninstall)
+    modename="$modename: $mode"
+    rm="$nonopt"
+    files=
+    rmforce=
+    exit_status=0
+
+    # This variable tells wrapper scripts just to set variables rather
+    # than running their programs.
+    libtool_install_magic="$magic"
+
+    for arg
+    do
+      case $arg in
+      -f) rm="$rm $arg"; rmforce=yes ;;
+      -*) rm="$rm $arg" ;;
+      *) files="$files $arg" ;;
+      esac
+    done
+
+    if test -z "$rm"; then
+      $echo "$modename: you must specify an RM program" 1>&2
+      $echo "$help" 1>&2
+      exit $EXIT_FAILURE
+    fi
+
+    rmdirs=
+
+    origobjdir="$objdir"
+    for file in $files; do
+      dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
+      if test "X$dir" = "X$file"; then
+       dir=.
+       objdir="$origobjdir"
+      else
+       objdir="$dir/$origobjdir"
+      fi
+      name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+      test "$mode" = uninstall && objdir="$dir"
+
+      # Remember objdir for removal later, being careful to avoid duplicates
+      if test "$mode" = clean; then
+       case " $rmdirs " in
+         *" $objdir "*) ;;
+         *) rmdirs="$rmdirs $objdir" ;;
+       esac
+      fi
+
+      # Don't error if the file doesn't exist and rm -f was used.
+      if (test -L "$file") >/dev/null 2>&1 \
+       || (test -h "$file") >/dev/null 2>&1 \
+       || test -f "$file"; then
+       :
+      elif test -d "$file"; then
+       exit_status=1
+       continue
+      elif test "$rmforce" = yes; then
+       continue
+      fi
+
+      rmfiles="$file"
+
+      case $name in
+      *.la)
+       # Possibly a libtool archive, so verify it.
+       if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+         . $dir/$name
+
+         # Delete the libtool libraries and symlinks.
+         for n in $library_names; do
+           rmfiles="$rmfiles $objdir/$n"
+         done
+         test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
+
+         case "$mode" in
+         clean)
+           case "  $library_names " in
+           # "  " in the beginning catches empty $dlname
+           *" $dlname "*) ;;
+           *) rmfiles="$rmfiles $objdir/$dlname" ;;
+           esac
+            test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
+           ;;
+         uninstall)
+           if test -n "$library_names"; then
+             # Do each command in the postuninstall commands.
+             cmds=$postuninstall_cmds
+             save_ifs="$IFS"; IFS='~'
+             for cmd in $cmds; do
+               IFS="$save_ifs"
+               eval cmd=\"$cmd\"
+               $show "$cmd"
+               $run eval "$cmd"
+               if test "$?" -ne 0 && test "$rmforce" != yes; then
+                 exit_status=1
+               fi
+             done
+             IFS="$save_ifs"
+           fi
+
+           if test -n "$old_library"; then
+             # Do each command in the old_postuninstall commands.
+             cmds=$old_postuninstall_cmds
+             save_ifs="$IFS"; IFS='~'
+             for cmd in $cmds; do
+               IFS="$save_ifs"
+               eval cmd=\"$cmd\"
+               $show "$cmd"
+               $run eval "$cmd"
+               if test "$?" -ne 0 && test "$rmforce" != yes; then
+                 exit_status=1
+               fi
+             done
+             IFS="$save_ifs"
+           fi
+           # FIXME: should reinstall the best remaining shared library.
+           ;;
+         esac
+       fi
+       ;;
+
+      *.lo)
+       # Possibly a libtool object, so verify it.
+       if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+
+         # Read the .lo file
+         . $dir/$name
+
+         # Add PIC object to the list of files to remove.
+         if test -n "$pic_object" \
+            && test "$pic_object" != none; then
+           rmfiles="$rmfiles $dir/$pic_object"
+         fi
+
+         # Add non-PIC object to the list of files to remove.
+         if test -n "$non_pic_object" \
+            && test "$non_pic_object" != none; then
+           rmfiles="$rmfiles $dir/$non_pic_object"
+         fi
+       fi
+       ;;
+
+      *)
+       if test "$mode" = clean ; then
+         noexename=$name
+         case $file in
+         *.exe)
+           file=`$echo $file|${SED} 's,.exe$,,'`
+           noexename=`$echo $name|${SED} 's,.exe$,,'`
+           # $file with .exe has already been added to rmfiles,
+           # add $file without .exe
+           rmfiles="$rmfiles $file"
+           ;;
+         esac
+         # Do a test to see if this is a libtool program.
+         if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+           relink_command=
+           . $dir/$noexename
+
+           # note $name still contains .exe if it was in $file originally
+           # as does the version of $file that was added into $rmfiles
+           rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
+           if test "$fast_install" = yes && test -n "$relink_command"; then
+             rmfiles="$rmfiles $objdir/lt-$name"
+           fi
+           if test "X$noexename" != "X$name" ; then
+             rmfiles="$rmfiles $objdir/lt-${noexename}.c"
+           fi
+         fi
+       fi
+       ;;
+      esac
+      $show "$rm $rmfiles"
+      $run $rm $rmfiles || exit_status=1
+    done
+    objdir="$origobjdir"
+
+    # Try to remove the ${objdir}s in the directories where we deleted files
+    for dir in $rmdirs; do
+      if test -d "$dir"; then
+       $show "rmdir $dir"
+       $run rmdir $dir >/dev/null 2>&1
+      fi
+    done
+
+    exit $exit_status
+    ;;
+
+  "")
+    $echo "$modename: you must specify a MODE" 1>&2
+    $echo "$generic_help" 1>&2
+    exit $EXIT_FAILURE
+    ;;
+  esac
+
+  if test -z "$exec_cmd"; then
+    $echo "$modename: invalid operation mode \`$mode'" 1>&2
+    $echo "$generic_help" 1>&2
+    exit $EXIT_FAILURE
+  fi
+fi # test -z "$show_help"
+
+if test -n "$exec_cmd"; then
+  eval exec $exec_cmd
+  exit $EXIT_FAILURE
+fi
+
+# We need to display help for each of the modes.
+case $mode in
+"") $echo \
+"Usage: $modename [OPTION]... [MODE-ARG]...
+
+Provide generalized library-building support services.
+
+    --config          show all configuration variables
+    --debug           enable verbose shell tracing
+-n, --dry-run         display commands without modifying any files
+    --features        display basic configuration information and exit
+    --finish          same as \`--mode=finish'
+    --help            display this help message and exit
+    --mode=MODE       use operation mode MODE [default=inferred from MODE-ARGS]
+    --quiet           same as \`--silent'
+    --silent          don't print informational messages
+    --tag=TAG         use configuration variables from tag TAG
+    --version         print version information
+
+MODE must be one of the following:
+
+      clean           remove files from the build directory
+      compile         compile a source file into a libtool object
+      execute         automatically set library path, then run a program
+      finish          complete the installation of libtool libraries
+      install         install libraries or executables
+      link            create a library or an executable
+      uninstall       remove libraries from an installed directory
+
+MODE-ARGS vary depending on the MODE.  Try \`$modename --help --mode=MODE' for
+a more detailed description of MODE.
+
+Report bugs to <bug-libtool@gnu.org>."
+  exit $EXIT_SUCCESS
+  ;;
+
+clean)
+  $echo \
+"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
+
+Remove files from the build directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, object or program, all the files associated
+with it are deleted. Otherwise, only FILE itself is deleted using RM."
+  ;;
+
+compile)
+  $echo \
+"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
+
+Compile a source file into a libtool library object.
+
+This mode accepts the following additional options:
+
+  -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
+  -prefer-pic       try to building PIC objects only
+  -prefer-non-pic   try to building non-PIC objects only
+  -static           always build a \`.o' file suitable for static linking
+
+COMPILE-COMMAND is a command to be used in creating a \`standard' object file
+from the given SOURCEFILE.
+
+The output file name is determined by removing the directory component from
+SOURCEFILE, then substituting the C source code suffix \`.c' with the
+library object suffix, \`.lo'."
+  ;;
+
+execute)
+  $echo \
+"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]...
+
+Automatically set library path, then run a program.
+
+This mode accepts the following additional options:
+
+  -dlopen FILE      add the directory containing FILE to the library path
+
+This mode sets the library path environment variable according to \`-dlopen'
+flags.
+
+If any of the ARGS are libtool executable wrappers, then they are translated
+into their corresponding uninstalled binary, and any of their required library
+directories are added to the library path.
+
+Then, COMMAND is executed, with ARGS as arguments."
+  ;;
+
+finish)
+  $echo \
+"Usage: $modename [OPTION]... --mode=finish [LIBDIR]...
+
+Complete the installation of libtool libraries.
+
+Each LIBDIR is a directory that contains libtool libraries.
+
+The commands that this mode executes may require superuser privileges.  Use
+the \`--dry-run' option if you just want to see what would be executed."
+  ;;
+
+install)
+  $echo \
+"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND...
+
+Install executables or libraries.
+
+INSTALL-COMMAND is the installation command.  The first component should be
+either the \`install' or \`cp' program.
+
+The rest of the components are interpreted as arguments to that command (only
+BSD-compatible install options are recognized)."
+  ;;
+
+link)
+  $echo \
+"Usage: $modename [OPTION]... --mode=link LINK-COMMAND...
+
+Link object files or libraries together to form another library, or to
+create an executable program.
+
+LINK-COMMAND is a command using the C compiler that you would use to create
+a program from several object files.
+
+The following components of LINK-COMMAND are treated specially:
+
+  -all-static       do not do any dynamic linking at all
+  -avoid-version    do not add a version suffix if possible
+  -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
+  -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
+  -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
+  -export-symbols SYMFILE
+                    try to export only the symbols listed in SYMFILE
+  -export-symbols-regex REGEX
+                    try to export only the symbols matching REGEX
+  -LLIBDIR          search LIBDIR for required installed libraries
+  -lNAME            OUTPUT-FILE requires the installed library libNAME
+  -module           build a library that can dlopened
+  -no-fast-install  disable the fast-install mode
+  -no-install       link a not-installable executable
+  -no-undefined     declare that a library does not refer to external symbols
+  -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
+  -objectlist FILE  Use a list of object files found in FILE to specify objects
+  -precious-files-regex REGEX
+                    don't remove output files matching REGEX
+  -release RELEASE  specify package release information
+  -rpath LIBDIR     the created library will eventually be installed in LIBDIR
+  -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
+  -static           do not do any dynamic linking of uninstalled libtool libraries
+  -static-libtool-libs
+                    do not do any dynamic linking of libtool libraries
+  -version-info CURRENT[:REVISION[:AGE]]
+                    specify library version info [each variable defaults to 0]
+
+All other options (arguments beginning with \`-') are ignored.
+
+Every other argument is treated as a filename.  Files ending in \`.la' are
+treated as uninstalled libtool libraries, other files are standard or library
+object files.
+
+If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
+only library objects (\`.lo' files) may be specified, and \`-rpath' is
+required, except when creating a convenience library.
+
+If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
+using \`ar' and \`ranlib', or on Windows using \`lib'.
+
+If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
+is created, otherwise an executable program is created."
+  ;;
+
+uninstall)
+  $echo \
+"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
+
+Remove libraries from an installation directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, all the files associated with it are deleted.
+Otherwise, only FILE itself is deleted using RM."
+  ;;
+
+*)
+  $echo "$modename: invalid operation mode \`$mode'" 1>&2
+  $echo "$help" 1>&2
+  exit $EXIT_FAILURE
+  ;;
+esac
+
+$echo
+$echo "Try \`$modename --help' for more information about other modes."
+
+exit $?
+
+# The TAGs below are defined such that we never get into a situation
+# in which we disable both kinds of libraries.  Given conflicting
+# choices, we go for a static library, that is the most portable,
+# since we can't tell whether shared libraries were disabled because
+# the user asked for that or because the platform doesn't support
+# them.  This is particularly important on AIX, because we don't
+# support having both static and shared libraries enabled at the same
+# time on that platform, so we default to a shared-only configuration.
+# If a disable-shared tag is given, we'll fallback to a static-only
+# configuration.  But we'll never go from static-only to shared-only.
+
+# ### BEGIN LIBTOOL TAG CONFIG: disable-shared
+disable_libs=shared
+# ### END LIBTOOL TAG CONFIG: disable-shared
+
+# ### BEGIN LIBTOOL TAG CONFIG: disable-static
+disable_libs=static
+# ### END LIBTOOL TAG CONFIG: disable-static
+
+# Local Variables:
+# mode:shell-script
+# sh-indentation:2
+# End:
index 1f6dea1a72e40410f9631b757b16f775fe53c28e..ee0385c26fa9bf01dd179951a54a1e0fda3ac14d 100755 (executable)
@@ -14,13 +14,14 @@ AM_CFLAGS =\
         -Wall\
         -g
 
-bin_PROGRAMS = chimara
+bin_PROGRAMS = test-chimara
 
-# First line: User interface sources
-# Second line: Glk program to run
-chimara_SOURCES = \
-       main.c callbacks.c callbacks.h error.c error.h \
-       first.c \
+test_chimara_SOURCES = main.c callbacks.c callbacks.h error.c error.h
+test_chimara_LDADD = $(TEST_LIBS) libchimara.la
+
+lib_LTLIBRARIES = libchimara.la
+
+libchimara_la_SOURCES = \
        abort.c abort.h \
        case.c \
        chimara-glk.c chimara-glk.h chimara-glk-private.h \
@@ -33,8 +34,20 @@ chimara_SOURCES = \
        strio.c \
        style.c \
        window.c window.h
+libchimara_la_LIBADD = $(CHIMARA_LIBS)
+libchimara_la_LDFLAGS = -no-undefined -export-symbols-regex "^chimara_glk_.*|^glk_.*"
+libchimara_includedir = $(includedir)/chimara/chimara
+libchimara_include_HEADERS = chimara-glk.h
+
+pkglib_LTLIBRARIES = first.la model.la
+
+first_la_SOURCES = first.c
+first_la_LIBADD = libchimara.la
+first_la_LDFLAGS = -module -avoid-version
 
-chimara_LDADD = $(CHIMARA_LIBS)
+model_la_SOURCES = model.c
+model_la_LIBADD = libchimara.la
+model_la_LDFLAGS = -module -avoid-version
 
 CLEANFILES = chimara.ui
 
index 63e9a38f53c0d44cb8cdea55d54e9649d114b887..a92377f3925f67c679e148ef604deea2402e698b 100644 (file)
@@ -2,6 +2,7 @@
 
 #include <gtk/gtk.h>
 #include <glib/gi18n.h>
+#include <gmodule.h>
 #include "chimara-glk.h"
 #include "chimara-glk-private.h"
 #include "glk.h"
@@ -10,6 +11,8 @@
 #define CHIMARA_GLK_MIN_WIDTH 0
 #define CHIMARA_GLK_MIN_HEIGHT 0
 
+typedef void (* glk_main_t) (void);
+
 enum {
     PROP_0,
     PROP_INTERACTIVE,
@@ -278,25 +281,53 @@ chimara_glk_get_protect(ChimaraGlk *glk)
     return priv->protect;
 }
 
-/* glk_enter() is called to create a new thread in which glk_main() runs.  */
+/* glk_enter() is the actual function called in the new thread in which glk_main() runs.  */
 static gpointer
-glk_enter(gpointer glk)
+glk_enter(gpointer glk_main)
 {
-    extern ChimaraGlkPrivate *glk_data;
-    
-    glk_data = CHIMARA_GLK_PRIVATE((ChimaraGlk *)glk);
-       glk_main();
+       ((glk_main_t)glk_main)();
        return NULL;
 }
 
 gboolean
-chimara_glk_run(ChimaraGlk *glk, GError **error)
+chimara_glk_run(ChimaraGlk *glk, gchar *plugin, GError **error)
 {
     g_return_val_if_fail(glk || CHIMARA_IS_GLK(glk), FALSE);
-
+    g_return_val_if_fail(plugin, FALSE);
+    
+    /* Open the module to run */
+    GModule *module;
+    glk_main_t glk_main;
+    g_assert( g_module_supported() );
+    module = g_module_open(plugin, G_MODULE_BIND_LAZY);
+    
+    if(!module)
+    {
+        g_warning( "Error opening module: %s", g_module_error() );
+        return FALSE;
+    }
+    if( !g_module_symbol(module, "glk_main", (gpointer *) &glk_main) )
+    {
+        g_warning( "Error finding glk_main(): %s", g_module_error() );
+        return FALSE;
+    }
+    
     ChimaraGlkPrivate *priv = CHIMARA_GLK_PRIVATE(glk);
+    extern ChimaraGlkPrivate *glk_data;
+    /* Set the thread's private data */
+    /* TODO: Do this with a GPrivate */
+    glk_data = priv;
+    
     /* Run in a separate thread */
-       priv->thread = g_thread_create(glk_enter, glk, TRUE, error);
+       priv->thread = g_thread_create(glk_enter, glk_main, TRUE, error);
+       
+       /* Close module */
+/*     if( !g_module_close(module) )
+       {
+           g_warning( "Error closing module: %s", g_module_error() );
+           return FALSE;
+       }*/
+       
        return !(priv->thread == NULL);
 }
 
@@ -305,7 +336,7 @@ chimara_glk_stop(ChimaraGlk *glk)
 {
     g_return_if_fail(glk || CHIMARA_IS_GLK(glk));
     
-    /* TODO */
+    signal_abort();
 }
 
 void
index 030d7062aa47152e517ec14b6006f1c5e3e22586..2f419722bd44e07c3480acdb6c4ebbd767ec3ebd 100644 (file)
@@ -43,7 +43,7 @@ void chimara_glk_set_interactive(ChimaraGlk *glk, gboolean interactive);
 gboolean chimara_glk_get_interactive(ChimaraGlk *glk);
 void chimara_glk_set_protect(ChimaraGlk *glk, gboolean protect);
 gboolean chimara_glk_get_protect(ChimaraGlk *glk);
-gboolean chimara_glk_run(ChimaraGlk *glk, GError **error);
+gboolean chimara_glk_run(ChimaraGlk *glk, gchar *plugin, GError **error);
 void chimara_glk_stop(ChimaraGlk *glk);
 void chimara_glk_wait(ChimaraGlk *glk);
 
index 6b7213809697553aa15b0eab0e0808d73675d89a..be4f23f816aa1783c82f6419cef3d2da3168d73b 100644 (file)
@@ -3,7 +3,6 @@
 #include <gtk/gtk.h>
 #include <glib/gstdio.h>
 #include "fileref.h"
-#include "error.h"
 #include "chimara-glk-private.h"
 
 extern ChimaraGlkPrivate *glk_data;
@@ -102,14 +101,14 @@ glk_fileref_create_temp(glui32 usage, glui32 rock)
        gint handle = g_file_open_tmp("glkXXXXXX", &filename, &error);
        if(handle == -1)
        {
-               error_dialog(NULL, error, "Error creating temporary file: ");
+               g_warning("Error creating temporary file: %s", error->message);
                if(filename)
                        g_free(filename);
                return NULL;
        }
        if(close(handle) == -1) /* There is no g_close()? */
        {
-               error_dialog(NULL, NULL, "Error closing temporary file.");
+               g_warning("Error closing temporary file.");
                if(filename)
                        g_free(filename);
                return NULL;
@@ -227,7 +226,7 @@ glk_fileref_create_by_name(glui32 usage, char *name, glui32 rock)
                &error);
        if(osname == NULL)
        {
-               error_dialog(NULL, error, "Error during latin1->filename conversion: ");
+               g_warning("Error during latin1->filename conversion: %s", error->message);
                return NULL;
        }
 
@@ -292,7 +291,7 @@ glk_fileref_delete_file(frefid_t fref)
 {
        if( glk_fileref_does_file_exist(fref) )
                if(g_unlink(fref->filename) == -1)
-                       error_dialog(NULL, NULL, "Error deleting file %s", fref->filename);
+                       g_warning("Error deleting file %s", fref->filename);
 }
 
 /**
index d9b0965bd3f9e1d4666cbd5e7ef90294889d4d01..e573df1666f518d612bde3c231b787fd92f68d89 100644 (file)
@@ -145,7 +145,7 @@ glk_request_line_event_uni(winid_t win, glui32 *buf, glui32 maxlen, glui32 initl
                        
                if(utf8 == NULL)
                {
-                       error_dialog(NULL, error, "Error during unicode->utf8 conversion: ");
+                       g_warning("Error during unicode->utf8 conversion: %s", error->message);
                        return;
                }
        }
@@ -270,7 +270,7 @@ after_window_insert_text(GtkTextBuffer *textbuffer, GtkTextIter *location, gchar
                        
                        if(latin1 == NULL)
                        {
-                               error_dialog(NULL, error, "Error during utf8->latin1 conversion: ");
+                               g_warning("Error during utf8->latin1 conversion: %s", error->message);
                                event_throw(evtype_LineInput, win, 0, 0);
                                return;
                        }
@@ -294,7 +294,7 @@ after_window_insert_text(GtkTextBuffer *textbuffer, GtkTextIter *location, gchar
                        
                        if(unicode == NULL)
                        {
-                               error_dialog(NULL, NULL, "Error during utf8->unicode conversion");
+                               g_warning("Error during utf8->unicode conversion");
                                event_throw(evtype_LineInput, win, 0, 0);
                                return;
                        }
index 978f788252eb5cb6c533aa5b063219510cc830e5..edcb1d54be1a92cb4c55b48d2e15cbbda2983567 100644 (file)
@@ -42,9 +42,6 @@
 
 #include "callbacks.h"
 #include "error.h"
-#include "event.h"
-#include "abort.h"
-#include "glk.h"
 #include "chimara-glk.h"
 
 /* Global pointers to widgets */
@@ -104,7 +101,7 @@ main(int argc, char *argv[])
 
        g_object_unref( G_OBJECT(builder) );
 
-    if( !chimara_glk_run(CHIMARA_GLK(glk), &error) ) {
+    if( !chimara_glk_run(CHIMARA_GLK(glk), ".libs/first.so", &error) ) {
         error_dialog(GTK_WINDOW(window), error, "Error starting Glk library: ");
         return 1;
     }
@@ -113,7 +110,7 @@ main(int argc, char *argv[])
        gtk_main();
        gdk_threads_leave();
 
-       signal_abort();
+       chimara_glk_stop(CHIMARA_GLK(glk));
        chimara_glk_wait(CHIMARA_GLK(glk));
 
        return 0;
index 8aaa20bba7f7268ce015024abe8007288c2ead13..3823df85c9e0d10204e770c6cf44176622aad292 100644 (file)
@@ -1,3 +1,4 @@
+#include "stdio.h"
 #include "glk.h"
 
 static winid_t mainwin = NULL;
index 27807246ec54297b7aa3f64888a1ebea1159f7e0..71a4503535a8e3bbe5739a27395a4e6cd380157d 100644 (file)
@@ -46,7 +46,7 @@ convert_latin1_to_utf8(gchar *s, gsize len)
        
        if(utf8 == NULL)
        {
-               error_dialog(NULL, error, "Error during latin1->utf8 conversion: ");
+               g_warning("Error during latin1->utf8 conversion: %s", error->message);
                return NULL;
        }