From 3af5f0dd53086f92b4c235740684bdff62377bfe Mon Sep 17 00:00:00 2001 From: Micah Anderson Date: Wed, 27 Jan 2010 17:45:21 -0500 Subject: [PATCH] Update README and INSTALL to be more clear how to install backupninja --- INSTALL | 241 ++++---------------------------------------------------- README | 92 ++++++++------------- 2 files changed, 46 insertions(+), 287 deletions(-) diff --git a/INSTALL b/INSTALL index 095b1eb..2895b6e 100644 --- a/INSTALL +++ b/INSTALL @@ -1,231 +1,20 @@ -Installation Instructions -************************* +INSTALLATION +============ + +Requirements: + bash gawk -Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004 Free -Software Foundation, Inc. +Recommended: + rdiff-backup duplicity rsync gzip hwinfo sfdisk -This file is free documentation; the Free Software Foundation gives -unlimited permission to copy, distribute and modify it. +Installation: + To install backupninja, simply do the following: -Basic Installation -================== + $ ./autogen.sh + $ ./configure + $ make + $ make install -These are generic installation instructions. - - The `configure' shell script attempts to guess correct values for -various system-dependent variables used during compilation. It uses -those values to create a `Makefile' in each directory of the package. -It may also create one or more `.h' files containing system-dependent -definitions. Finally, it creates a shell script `config.status' that -you can run in the future to recreate the current configuration, and a -file `config.log' containing compiler output (useful mainly for -debugging `configure'). - - It can also use an optional file (typically called `config.cache' -and enabled with `--cache-file=config.cache' or simply `-C') that saves -the results of its tests to speed up reconfiguring. (Caching is -disabled by default to prevent problems with accidental use of stale -cache files.) - - If you need to do unusual things to compile the package, please try -to figure out how `configure' could check whether to do them, and mail -diffs or instructions to the address given in the `README' so they can -be considered for the next release. If you are using the cache, and at -some point `config.cache' contains results you don't want to keep, you -may remove or edit it. - - The file `configure.ac' (or `configure.in') is used to create -`configure' by a program called `autoconf'. You only need -`configure.ac' if you want to change it or regenerate `configure' using -a newer version of `autoconf'. - -The simplest way to compile this package is: - - 1. `cd' to the directory containing the package's source code and type - `./configure' to configure the package for your system. If you're - using `csh' on an old version of System V, you might need to type - `sh ./configure' instead to prevent `csh' from trying to execute - `configure' itself. - - Running `configure' takes awhile. While running, it prints some - messages telling which features it is checking for. - - 2. Type `make' to compile the package. - - 3. Optionally, type `make check' to run any self-tests that come with - the package. - - 4. Type `make install' to install the programs and any data files and - documentation. - - 5. You can remove the program binaries and object files from the - source code directory by typing `make clean'. To also remove the - files that `configure' created (so you can compile the package for - a different kind of computer), type `make distclean'. There is - also a `make maintainer-clean' target, but that is intended mainly - for the package's developers. If you use it, you may have to get - all sorts of other programs in order to regenerate files that came - with the distribution. - -Compilers and Options -===================== - -Some systems require unusual options for compilation or linking that the -`configure' script does not know about. Run `./configure --help' for -details on some of the pertinent environment variables. - - You can give `configure' initial values for configuration parameters -by setting variables in the command line or in the environment. Here -is an example: - - ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix - - *Note Defining Variables::, for more details. - -Compiling For Multiple Architectures -==================================== - -You can compile the package for more than one kind of computer at the -same time, by placing the object files for each architecture in their -own directory. To do this, you must use a version of `make' that -supports the `VPATH' variable, such as GNU `make'. `cd' to the -directory where you want the object files and executables to go and run -the `configure' script. `configure' automatically checks for the -source code in the directory that `configure' is in and in `..'. - - If you have to use a `make' that does not support the `VPATH' -variable, you have to compile the package for one architecture at a -time in the source code directory. After you have installed the -package for one architecture, use `make distclean' before reconfiguring -for another architecture. - -Installation Names -================== - -By default, `make install' will install the package's files in -`/usr/local/bin', `/usr/local/man', etc. You can specify an -installation prefix other than `/usr/local' by giving `configure' the -option `--prefix=PREFIX'. - - You can specify separate installation prefixes for -architecture-specific files and architecture-independent files. If you -give `configure' the option `--exec-prefix=PREFIX', the package will -use PREFIX as the prefix for installing programs and libraries. -Documentation and other data files will still use the regular prefix. - - In addition, if you use an unusual directory layout you can give -options like `--bindir=DIR' to specify different values for particular -kinds of files. Run `configure --help' for a list of the directories -you can set and what kinds of files go in them. - - If the package supports it, you can cause programs to be installed -with an extra prefix or suffix on their names by giving `configure' the -option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. - -Optional Features -================= - -Some packages pay attention to `--enable-FEATURE' options to -`configure', where FEATURE indicates an optional part of the package. -They may also pay attention to `--with-PACKAGE' options, where PACKAGE -is something like `gnu-as' or `x' (for the X Window System). The -`README' should mention any `--enable-' and `--with-' options that the -package recognizes. - - For packages that use the X Window System, `configure' can usually -find the X include and library files automatically, but if it doesn't, -you can use the `configure' options `--x-includes=DIR' and -`--x-libraries=DIR' to specify their locations. - -Specifying the System Type -========================== - -There may be some features `configure' cannot figure out automatically, -but needs to determine by the type of machine the package will run on. -Usually, assuming the package is built to be run on the _same_ -architectures, `configure' can figure that out, but if it prints a -message saying it cannot guess the machine type, give it the -`--build=TYPE' option. TYPE can either be a short name for the system -type, such as `sun4', or a canonical name which has the form: - - CPU-COMPANY-SYSTEM - -where SYSTEM can have one of these forms: - - OS KERNEL-OS - - See the file `config.sub' for the possible values of each field. If -`config.sub' isn't included in this package, then this package doesn't -need to know the machine type. - - If you are _building_ compiler tools for cross-compiling, you should -use the `--target=TYPE' option to select the type of system they will -produce code for. - - If you want to _use_ a cross compiler, that generates code for a -platform different from the build platform, you should specify the -"host" platform (i.e., that on which the generated programs will -eventually be run) with `--host=TYPE'. - -Sharing Defaults -================ - -If you want to set default values for `configure' scripts to share, you -can create a site shell script called `config.site' that gives default -values for variables like `CC', `cache_file', and `prefix'. -`configure' looks for `PREFIX/share/config.site' if it exists, then -`PREFIX/etc/config.site' if it exists. Or, you can set the -`CONFIG_SITE' environment variable to the location of the site script. -A warning: not all `configure' scripts look for a site script. - -Defining Variables -================== - -Variables not defined in a site shell script can be set in the -environment passed to `configure'. However, some packages may run -configure again during the build, and the customized values of these -variables may be lost. In order to avoid this problem, you should set -them in the `configure' command line, using `VAR=value'. For example: - - ./configure CC=/usr/local2/bin/gcc - -will cause the specified gcc to be used as the C compiler (unless it is -overridden in the site shell script). - -`configure' Invocation -====================== - -`configure' recognizes the following options to control how it operates. - -`--help' -`-h' - Print a summary of the options to `configure', and exit. - -`--version' -`-V' - Print the version of Autoconf used to generate the `configure' - script, and exit. - -`--cache-file=FILE' - Enable the cache: use and save the results of the tests in FILE, - traditionally `config.cache'. FILE defaults to `/dev/null' to - disable caching. - -`--config-cache' -`-C' - Alias for `--cache-file=config.cache'. - -`--quiet' -`--silent' -`-q' - Do not print messages saying which checks are being made. To - suppress all normal output, redirect it to `/dev/null' (any error - messages will still be shown). - -`--srcdir=DIR' - Look for the package's source code in directory DIR. Usually - `configure' can determine that directory automatically. - -`configure' also accepts some other, not widely useful, options. Run -`configure --help' for more details. + You may wish to change the install locations, or other options. To find + the available possibilities, run ./configure --help. diff --git a/README b/README index 04eda2f..8b01add 100644 --- a/README +++ b/README @@ -46,6 +46,37 @@ The following options are available: --run FILE Runs the specified action FILE (e.g. one of the /etc/backup.d/ files). Also puts backupninja in debug mode. +NINJAHELPER +=========== + +Ninjahelper is an additional script which will walk you through the process of +configuring backupninja. Ninjahelper has a menu driven curses based interface +(using dialog). + +To add an additional 'wizard' to ninjahelper, follow these steps: + +(1) to add a helper for the handler "blue", create the file + blue.helper in the directory where the handlers live. + (ie /usr/share/backupninja). + +(2) next, you need to add your helper to the global HELPERS variable + and define the main function for your helper (the function name + is always _wizard). for example, blue.helper: + HELPERS="$HELPERS blue:description_of_this_helper" + blue_wizard() { + ... do work here ... + } + +(3) look at the existing helpers to see how they are written. Try to re-use + functions, such as the dialog functions that are defined in easydialog.sh, + or the vserver functions defined in lib/vserver. + +(4) test, re-test, and test again. Try to break the helper by going backwards, + try to think like someone who has no idea how to configure your handler + would think, try to make your helper as simple as possible. Walk like a cat, + become your shadow, don't let your senses betray you. + + CONFIGURATION FILES =================== @@ -192,38 +223,6 @@ operation therefore reducing the costs. The boto Python interface to Amazon Web Services is needed to use duplicity with S3 (Debian package: python-boto). -INSTALLATION -============ - -Requirements: - apt-get install bash gawk - -Recommended: - apt-get install rdiff-backup gzip hwinfo - -Files: - /usr/sbin/backupninja -- main script - /etc/cron.d/backupninja -- runs main script nightly - /etc/logrotate.d/backupninja -- rotates backupninja.log - /etc/backup.d/ -- directory for configuration files - /etc/backupninja.conf -- general options - /usr/share/backupninja -- handler scripts which do the actual work - -Installation: - There is no install script, but you just need to move files to the - correct locations. All files should be owned by root. - - # tar xvzf backupninja.tar.gz - # cd backupninja - # mv backupninja /usr/sbin/backupninja - # mv ninjahelper /usr/sbin/ninjahelper - # mv etc/logrotate.d/backupninja /etc/logrotate.d/backupninja - # mv etc/cron.d/backupninja /etc/cron.d/backupninja - # mkdir /etc/backup.d/ - # mv etc/backupninja.conf /etc/backupninja.conf - # mv handlers /usr/share/backupninja - - VSERVERS ======== @@ -242,32 +241,3 @@ VSERVERINFO (default: /usr/sbin/vserver-info) VSERVER (default: /usr/sbin/vserver) VROOTDIR (default: `$VSERVERINFO info SYSINFO |grep vserver-Rootdir | awk '{print $2}'`) -NINJAHELPER -=========== - -Ninjahelper is an additional script which will walk you through the process of -configuring backupninja. Ninjahelper has a menu driven curses based interface -(using dialog). - -To add an additional 'wizard' to ninjahelper, follow these steps: - -(1) to add a helper for the handler "blue", create the file - blue.helper in the directory where the handlers live. - (ie /usr/share/backupninja). - -(2) next, you need to add your helper to the global HELPERS variable - and define the main function for your helper (the function name - is always _wizard). for example, blue.helper: - HELPERS="$HELPERS blue:description_of_this_helper" - blue_wizard() { - ... do work here ... - } - -(3) look at the existing helpers to see how they are written. Try to re-use - functions, such as the dialog functions that are defined in easydialog.sh, - or the vserver functions defined in lib/vserver. - -(4) test, re-test, and test again. Try to break the helper by going backwards, - try to think like someone who has no idea how to configure your handler - would think, try to make your helper as simple as possible. Walk like a cat, - become your shadow, don't let your senses betray you. -- 2.30.2