# (2) a list of all the packages installed and removed.
# this file can be used to restore the state of installed packages
# by running "dpkg --set-selections < dpkg-selections.txt and
-# then run "apt-get -u dselect-upgrade". If you have the
+# then run "apt-get -u dselect-upgrade". If you have the
# debconf-set-selections file from (1), you should restore those first.
-#
-# (3) the partition table of all disks.
+#
+# (3) the partition table of all disks.
# this partition table can be used to format another disk of
-# the same size. this can be handy if using software raid and
+# the same size. this can be handy if using software raid and
# you have a disk go bad. just replace the disk and partition it
# by running "sfdisk /dev/sdb < partitions.sdb.txt"
# (MAKE SURE YOU PARTITION THE CORRECT DISK!!!)
#
-# (4) hardware information.
+# (4) hardware information.
# write to a text file the important things which hwinfo can gleen.
#
# (5) the Luks header of every Luks block device, if option luksheaders
if [ ! -d $parentdir ]; then
mkdir -p $parentdir
fi
-
+
if [ $os = "debian" ]
then
getconf packagesfile $parentdir/dpkg-selections.txt
getconf debconfgetselections `which debconf-get-selections`
elif [ $os = "redhat" ]
then
- getconf packagesfile $parentdir/rpmpackages.txt
- getconf packagemgr `which rpm`
- getconf packagemgroptions ' -qa '
+ getconf packagesfile $parentdir/rpmpackages.txt
+ getconf packagemgr `which rpm`
+ getconf packagemgroptions ' -qa '
getconf SYSREPORT `which sysreport`
getconf sysreport_options ' -norpm '
# don't expand * since it can be used in $packagemgroptions
set -o noglob
debug "$VSERVER $vserver exec $packagemgr $packagemgroptions > $VROOTDIR/$vserver$packagesfile"
- $VSERVER $vserver exec $packagemgr $packagemgroptions > $VROOTDIR/$vserver$packagesfile || fatal "can not save $packagemgr info to $packagesfile"
+ $VSERVER $vserver exec $packagemgr $packagemgroptions > $VROOTDIR/$vserver$packagesfile || fatal "can not save $packagemgr info to $packagesfile"
set +o noglob
fi
# is $debconfgetselections available inside $vserver ?
unset found
done
fi
-
+
# We want to perform this on the host as well
- if [ -z "$packagemgr" -o ! -x "$packagemgr" ]; then
+ if [ -z "$packagemgr" -o ! -x "$packagemgr" ]; then
warning "can't find ${packagemgr}, skipping installed packages report."
else
# don't expand * since it can be used in $packagemgroptions
done
fi
echo $DASHES >> $sysreportfile
-}
+}
catifexec () {
if [ -x $1 ]; then
$* >> $sysreportfile 2>&1 || info "executing of $1 failed"
fi
}
-
+
STATUS="Determining $os version:"
catiffile $osversion
-STATUS="Determinding your current hostname: "
+STATUS="Determinding your current hostname: "
catifexec "/bin/hostname"
STATUS="Getting the date:"
catiffile "/bin/ls /etc/rc.d/rc*.d/"
elif [ $os = "debian" ]; then
- for level in 0 1 2 3 4 5 6 S; do
- echo "Level: $level" >> $sysreportfile
- for f in /etc/rc${level}.d/*; do
- # Remove /etc/Knn or Snn from beginning
- ff=$(echo $f | @SED@ 's_/etc/rc..d/[KS][0-9][0-9]__')
- if [ $f != $ff ]; then
- echo $ff >> $sysreportfile
- fi
- done
- echo "" >> $sysreportfile
- done
+ for level in 0 1 2 3 4 5 6 S; do
+ echo "Level: $level" >> $sysreportfile
+ for f in /etc/rc${level}.d/*; do
+ # Remove /etc/Knn or Snn from beginning
+ ff=$(echo $f | @SED@ 's_/etc/rc..d/[KS][0-9][0-9]__')
+ if [ $f != $ff ]; then
+ echo $ff >> $sysreportfile
+ fi
+ done
+ echo "" >> $sysreportfile
+ done
fi
STATUS="Getting bootloader information:"
# This covers sparc, alpha, and intel (respectively)
# updated for grub -mpg
if [ -f /etc/silo.conf ]; then
- STATUS="Collecting information about the boot process (silo):"
- catiffile "/etc/silo.conf"
+ STATUS="Collecting information about the boot process (silo):"
+ catiffile "/etc/silo.conf"
fi
if [ -f /etc/milo.conf ]; then
- STATUS="Collecting information about the boot process (milo):"
- catiffile "/etc/milo.conf"
+ STATUS="Collecting information about the boot process (milo):"
+ catiffile "/etc/milo.conf"
fi
if [ -f /etc/lilo.conf ]; then
- STATUS="Collecting information about the boot process (lilo):"
- catiffile "/etc/lilo.conf"
- catifexec "/sbin/lilo" "-q"
+ STATUS="Collecting information about the boot process (lilo):"
+ catiffile "/etc/lilo.conf"
+ catifexec "/sbin/lilo" "-q"
fi
if [ -d /boot/grub -a -f /boot/grub/grub.conf -a -f /boot/grub/device.map ]; then
- STATUS="Collecting information about the boot process (grub.conf):"
- catiffile "/boot/grub/grub.conf"
- STATUS="Collecting information about the boot process (grub.map):"
- catiffile "/boot/grub/device.map"
+ STATUS="Collecting information about the boot process (grub.conf):"
+ catiffile "/boot/grub/grub.conf"
+ STATUS="Collecting information about the boot process (grub.map):"
+ catiffile "/boot/grub/device.map"
fi
if [ -f /etc/cluster.conf -o -f /etc/cluster.xml ] ; then
- STATUS="Gathering information on cluster setup"
- # 2.1 AS
- if [ -f /etc/cluster.conf ] ; then
- catiffile "/etc/cluster.conf"
- fi
- # Taroon
- if [ -f /etc/cluster.xml ] ; then
- catiffile "/etc/cluster.xml"
- fi
+ STATUS="Gathering information on cluster setup"
+ # 2.1 AS
+ if [ -f /etc/cluster.conf ] ; then
+ catiffile "/etc/cluster.conf"
+ fi
+ # Taroon
+ if [ -f /etc/cluster.xml ] ; then
+ catiffile "/etc/cluster.xml"
+ fi
fi
STATUS="Gathering sysctl information (sysctl -a):"
catifexec "/bin/uname" "-a"
STATUS="Checking module information:"
catifexec "/sbin/lsmod"
-for x in $(/sbin/lsmod | /bin/cut -f1 -d" " 2>/dev/null | /bin/grep -v Module 2>/dev/null
+for x in $(/sbin/lsmod | /bin/cut -f1 -d" " 2>/dev/null | /bin/grep -v Module 2>/dev/null
) ; do
- STATUS="Checking module information $x:"
- catifexec "/sbin/modinfo" "$x"
+ STATUS="Checking module information $x:"
+ catifexec "/sbin/modinfo" "$x"
done
STATUS="Gathering information about your filesystems:"
VER=`uname -r`
catiffile "/lib/modules/$VER/modules.dep"
if [ -f /etc/conf.modules ]; then
- STATUS="Collecting information regarding kernel modules (conf.modules)"
- catiffile "/etc/conf.modules"
+ STATUS="Collecting information regarding kernel modules (conf.modules)"
+ catiffile "/etc/conf.modules"
fi
if [ -f /etc/modules.conf ]; then
- STATUS="Collecting information regarding kernel modules (modules.conf)"
- catiffile "/etc/modules.conf"
+ STATUS="Collecting information regarding kernel modules (modules.conf)"
+ catiffile "/etc/modules.conf"
fi
if [ -f /etc/modprobe.conf ]; then
- STATUS="Collecting information regarding kernel modules (modeprobe.conf)"
- catiffile "/etc/modprobe.conf"
+ STATUS="Collecting information regarding kernel modules (modeprobe.conf)"
+ catiffile "/etc/modprobe.conf"
fi
# dkms status
if [ -x /usr/sbin/dkms ] ; then
STATUS="Gathering current status of modules, versions and kernels (dkms):"
- catifexec "/usr/sbin/dkms" "status"
+ catifexec "/usr/sbin/dkms" "status"
fi
if [ -f /etc/sysconfig/isdncard ] ; then
- STATUS="Gathering information about ISDN:"
- catiffile "/etc/sysconfig/isdncard"
+ STATUS="Gathering information about ISDN:"
+ catiffile "/etc/sysconfig/isdncard"
fi
STATUS="Collecting information from the proc directory:"
STATUS="Collecting device-mapper (dm) information:"
catifexec '/sbin/dmsetup' 'info'
-
+
STATUS="Collecting SCSI Tape information (/etc/stinit.def)"
catiffile "/etc/stinit.def"
if [ -x /sbin/lsusb ] ; then
- STATUS="Collecting USB devices list (lsusb):"
- catifexec "/sbin/lsusb"
+ STATUS="Collecting USB devices list (lsusb):"
+ catifexec "/sbin/lsusb"
fi
if [ -x /usr/bin/lshal ] ; then
- STATUS="Collecting global devices list (lshal):"
- catifexec "/usr/bin/lshal"
+ STATUS="Collecting global devices list (lshal):"
+ catifexec "/usr/bin/lshal"
fi
if [ "$partitions" == "yes" ]; then
if [ "$dosfdisk" == "yes" ]; then
- if [ ! -x "$SFDISK" ]; then
- warning "can't find sfdisk, skipping sfdisk report."
- partitions="no"
- fi
+ if [ ! -x "$SFDISK" ]; then
+ warning "can't find sfdisk, skipping sfdisk report."
+ partitions="no"
+ fi
fi
if [ "$dohwinfo" == "yes" ]; then
- if [ ! -x "$HWINFO" ]; then
- warning "can't find hwinfo, skipping partition report."
- partitions="no"
- fi
+ if [ ! -x "$HWINFO" ]; then
+ warning "can't find hwinfo, skipping partition report."
+ partitions="no"
+ fi
fi
fi
if [ "$hardware" == "yes" ]; then
- if [ ! -x "$HWINFO" ]; then
- warning "can't find hwinfo, skipping hardware report."
- hardware="no"
- fi
+ if [ ! -x "$HWINFO" ]; then
+ warning "can't find hwinfo, skipping hardware report."
+ hardware="no"
+ fi
fi
## HARDWARE #############################
#
# here we use hwinfo to dump a table listing all the
# information we can find on the hardware of this machine
-#
+#
if [ "$hardware" == "yes" ]; then
if [ "dohwinfo" == "yes" ]; then
if [ -f $hardwarefile ]; then
- rm $hardwarefile
+ rm $hardwarefile
fi
touch $hardwarefile
echo -e "\n\n====================== summary ======================\n" >> $hardwarefile
debug "$HWINFO --short --cpu --network --disk --pci >> $hardwarefile"
$HWINFO --short --cpu --network --disk --pci >> $hardwarefile
for flag in cpu network bios pci; do
- echo -e "\n\n====================== $flag ======================\n" >> $hardwarefile
- $HWINFO --$flag >> $hardwarefile
+ echo -e "\n\n====================== $flag ======================\n" >> $hardwarefile
+ $HWINFO --$flag >> $hardwarefile
done
fi
fi
## PARTITIONS #############################
-# here we use sfdisk to dump a listing of all the partitions.
+# here we use sfdisk to dump a listing of all the partitions.
# these files can be used to directly partition a disk of the same size.
if [ "$partitions" == "yes" ]; then
if [ "$dosfdisk" == "yes" ]; then
devices=`LC_ALL=C $SFDISK -l 2>/dev/null | grep "^Disk /dev" | @AWK@ '{print $2}' | cut -d: -f1`
- if [ "$devices" == "" ]; then
- warning "No harddisks found"
- fi
- for dev in $devices; do
- debug "$SFDISK will try to backup partition tables for device $dev"
- [ -b $dev ] || continue
- label=${dev#/dev/}
- label=${label//\//-}
- outputfile=${partitionsfile//__star__/$label}
- debug "$SFDISK $sfdisk_options -d $dev > $outputfile 2>/dev/null"
- $SFDISK $sfdisk_options -d $dev > $outputfile 2>/dev/null
- if [ $? -ne 0 ]; then
- warning "The partition table for $dev could not be saved."
- fi
- done
+ if [ "$devices" == "" ]; then
+ warning "No harddisks found"
+ fi
+ for dev in $devices; do
+ debug "$SFDISK will try to backup partition tables for device $dev"
+ [ -b $dev ] || continue
+ label=${dev#/dev/}
+ label=${label//\//-}
+ outputfile=${partitionsfile//__star__/$label}
+ debug "$SFDISK $sfdisk_options -d $dev > $outputfile 2>/dev/null"
+ $SFDISK $sfdisk_options -d $dev > $outputfile 2>/dev/null
+ if [ $? -ne 0 ]; then
+ warning "The partition table for $dev could not be saved."
+ fi
+ done
fi
if [ "$dohwinfo" == "yes" ]; then
debug "Using $HWINFO to get all available disk information"
fi
fi
if [ ! -w "$lvmdir" ]; then
- echo "can not write to directory $lvmdir"
- return 2
+ echo "can not write to directory $lvmdir"
+ return 2
fi
debug "Let's try to gather the list of LVM volume groups"
debug "$VGS --options vg_name --noheadings | @SED@ 's/^[ ]*//' | @SED@ 's/[ ]*$//' | tr '\n' ' '"
projects / matthijs / upstream / backupninja.git / blobdiff