Allow the entire backup run to be halted by an action (Closes: #455836)
[matthijs/upstream/backupninja.git] / ChangeLog
index 24e7e38a8c2c70ee105313c7f12e22469a7f5e71..fd3cc4842c4d0fcd9c166d0faaf23cb2ea859870 100644 (file)
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,10 +1,34 @@
-version 0.9.5 -- unreleased
-    ninjareport
-        . Added first draft of method to aggregate reports from many servers into
-          one email. Requires logtail, rsync, configuration of reporthost,
-          reportdirectory and reportuser in backupninja.conf. Configure cron to
-          run once a day, and individual backupninjas not to report by email their
-          status, then enjoy one email report from all hosts, rather than multiple
+version 0.9.6 -- unreleased
+    backupninja changes
+        . fix bug in cstream definition, thanks Jamie McClelland
+        . Allow the entire backup run to be halted by an action, thanks to
+          Matthew Palmer (Closes: #455836)
+    handler changes
+       dup:
+        . General cleanup
+        . Better support for new duplicity (>= 0.4.4) command line syntax:
+          run remove-older-than when $keep is not set to yes (Closes: #458816),
+          and run "duplicity cleanup" before any other duplicity command; both
+          only trigger a warning on failure, since they should not stop backups
+          from being done. Also migrated full/incremental backup switch to the
+          new syntax.
+       ldap:
+        . support HDB backend just as the BDB one, and make message clearer
+          when no supported backend is found (Closes: #476910)
+       rdiff:
+        . Fixed ignore_version default value missing
+        . Add patch from Matthew Palmer to rdiff handler to incorporate sshoptions
+          into options via remote-schema not already specified (Closes: #424639)
+       wget:
+        . New handler from rhatto designed to incrementally pull content from
+          a website to a local folder, based on the rsync handler
+       maildir:
+        . fixed bug where maildirs that start with a number were skipped.
+        . make deleted maildirs record the date they were deleted
+        . add destid_file configuration option to enable you to specify an alternate
+          ssh public key authentication file (defaulting to /root/.ssh/id_rsa)
+
+version 0.9.5 -- December 2, 2007
     backupninja changes
         . Fixed checks on configuration files permissions, since the patch
           applied to fix #370396 broke this, especially for configuration files
@@ -32,7 +56,7 @@ version 0.9.5 -- unreleased
           to be correct, also set TLS to be the default over SSL (Closes: Trac#13)
        maildir:
         . Added an examples file (Closes: Trac#23)
-        . Applied patch from Anarcat that fixes the cp/mkdir calls to not use GNU 
+        . Applied patch from Anarcat that fixes the cp/mkdir calls to not use GNU
           coreutils options, as well as some bashisms (Closes: Trac#24)
         . Fix test mode (Closes: Trac#25)
         mysql:
@@ -42,8 +66,8 @@ version 0.9.5 -- unreleased
           the data from a backup, but still backup the table structure. This is very
           useful in cases where tables contain large amounts of cache data. See the
           example.mysql for options, thanks Daniel Bonniot (Closes: #408829)
-        . Enhance code for selecting databases by asking MySQL not to give us the 
-          header (-N), to not draw pretty boxes around the output (-B), send the query 
+        . Enhance code for selecting databases by asking MySQL not to give us the
+          header (-N), to not draw pretty boxes around the output (-B), send the query
           via -e instead of a pipe and ensure MySQL listens to -B. Thanks to
           Matthew Palmer (Closes: #452039).
        pgsql:
@@ -77,11 +101,17 @@ version 0.9.5 -- unreleased
         . Fixed example in example.sys to detail the __star__ in partitionsfile and
           note why its necessary (Closes: #409192)
         . Force C locale for sfdisk to ensure english words are found in grep
-        . Make directory where output is placed configurable, and create the parent dir 
+        . Make directory where output is placed configurable, and create the parent dir
           if it doesn't exist (Closes: Trac#1)
+    ninjareport
+        . Added first draft of method to aggregate reports from many servers into
+          one email. Requires logtail, rsync, configuration of reporthost,
+          reportdirectory and reportuser in backupninja.conf. Configure cron to
+          run once a day, and individual backupninjas not to report by email their
+          status, then enjoy one email report from all hosts, rather than multiple
     fixed 'make install' bug that failed if /etc/backup.d already existed
     changed spaces to tabs in Makefile.am
-    
+    updated redhat spec file (thanks Adam Monsen)
 
 version 0.9.4 -- October 6th, 2006
     backupninja changes
@@ -91,7 +121,7 @@ version 0.9.4 -- October 6th, 2006
         . Add admingroup option to configuration to allow a group that can
           read/write configurations (instead of only allowing root). Checks
           and complains about group-readable files only when the group differs
-          from the one in the configuration file (default is root as before). 
+          from the one in the configuration file (default is root as before).
           Thanks to Martin Krafft for the patch (Closes: #370396).
         . When determining which backup actions to make, find now follows
           symlinks for $configdirectory
@@ -105,7 +135,7 @@ version 0.9.4 -- October 6th, 2006
        Added rsnap handler:
         . rotated rsync snapshops
         . code from paulv@bikkel.org
-       Added rub handler: 
+       Added rub handler:
         . alternative to rsnap
         . code from rhatto@riseup.net
        mysql:
@@ -121,7 +151,7 @@ version 0.9.4 -- October 6th, 2006
         . Fixed shell expansion, thanks Thomas Kotzian (Closes: #363297)
         . postgres user UID is now the one from inside the vserver if necessary
         . Compress now happens in-line to save some disk space (Closes: #370778)
-        . $PGSQLUSER is used instead of hardcoding user 'postgres' (although this is the default) 
+        . $PGSQLUSER is used instead of hardcoding user 'postgres' (although this is the default)
        svn:
         . Fixed inversed vsname emptiness check
        rdiff:
@@ -164,7 +194,7 @@ version 0.9.4 -- October 6th, 2006
        vserver:
         . init_vservers: fixed Debian bug #351083 (improper readlink syntax)
         . found_vservers: escaped special grep repetition character +
-        . forced mktemp to use a template with a name to be more compatible with 
+        . forced mktemp to use a template with a name to be more compatible with
           different versions of mktemp, thanks anarcat
     ninjahelper changes
         . Recursively ignore subdirs in /etc/backup.d (Closes: #361102)
@@ -181,7 +211,7 @@ version 0.9.4 -- October 6th, 2006
     changed /etc/backup.d permissions to 0770 (for admingroup)
     minor documentation fixes
     improved RPM build process allowing 'make rpm-package' and 'make
-    srpm-package' targets, also fixes permissions on man directories, 
+    srpm-package' targets, also fixes permissions on man directories,
     cleans up RPM-related files during distclean, and adds default
     EDITOR for "autogen.sh -f" if none is set. (thanks Robert Napier)
 
@@ -230,7 +260,7 @@ version 0.9.3 -- February 1st, 2006
         . init_vservers: warn if vservers are enabled but no vserver is found
         . new function: vservers_exist
     known bugs:
-        easydialog: 
+        easydialog:
          . formDisplay does not return exit status.
 
 version 0.9.2 -- December 29, 2005
@@ -244,7 +274,7 @@ version 0.9.2 -- December 29, 2005
         trac:
             . mkdir subdirectory problem fixed
         duplicity:
-            . globbing support fixed in include and exclude options 
+            . globbing support fixed in include and exclude options
             . different signing and encrypting key support added
             . fixed erroneous comments in example.dup about the way
               GnuPG-related options are used
@@ -258,12 +288,12 @@ version 0.9.2 -- December 29, 2005
         rdiff-backup:
             . used to expand '*' in default source directories
             . the "Cancel" buttons used to have a weird behaviour
-            . updated to include Vserver selection 
+            . updated to include Vserver selection
         pgsql:
-            . forbid the user to choose an empty database set 
+            . forbid the user to choose an empty database set
             . "Cancel" button now does what it is meant to do
         mysql:
-            . enhanced for vserver support 
+            . enhanced for vserver support
             . now able to select databases and dump directory
         duplicity:
             . new handler added (with Vserver support)
@@ -279,20 +309,20 @@ version 0.9.1 -- November 05 2005
     changed subversion handler to use svnadmin hotcopy instead of
             the unsupported hot-copy.py script, which was moved in Debian
     update rdiff ninjahelper
-            now detects and auto-install rdiff-backup on the remote 
+            now detects and auto-install rdiff-backup on the remote
             machine if possible, also tests the remote backup directory
             and offers to create it if it doesn't exist
 
 version 0.9 -- October 19 2005
     *** IMPORTANT CHANGE, UPGRADE AT ONCE ***
-     fixed insecure temporary file creation 
+     fixed insecure temporary file creation
     *****************************************
     removed erroneous magic file marker in pgsql handler
     fixed incorrect find positional
     changed direct grep of /etc/passwd to getent passwd.
     rdiff helper has much better information on failed ssh attempt
         (patch from cmccallum@thecsl.org).
-    rdiff handler now supports remote source and local dest. 
+    rdiff handler now supports remote source and local dest.
         (patch from cmccallum@thecsl.org).
     man pages are greatly improved.
 
@@ -341,7 +371,7 @@ version 0.6 -- June 16 2005
         slapcat), restart, passwordfile and binddn. Default backup method
         is set to ldapsearch as this is safer
     ******************************************************************
-    NOTE: to get the previous default behavior with the ldap handler, 
+    NOTE: to get the previous default behavior with the ldap handler,
     you must set "method = slapcat". The new default is ldapsearch.
     ******************************************************************
     implemented fix so that the main script will echo fatal errors rather
@@ -357,10 +387,10 @@ version 0.6 -- June 16 2005
         added "testconnect" option
         added "sshoptions" option (will be passed to ssh/scp)
         added "bandwidthlimit" option
-    example.dup example config file for duplicity handler 
+    example.dup example config file for duplicity handler
     added trac (http://trac.edgewall.com/) environment handler (thanks Charles Lepple!)
     added configfile option to mysql handler
-        the default is /etc/mysql/debian.cnf. with this, 
+        the default is /etc/mysql/debian.cnf. with this,
         sqldump doesn't need dbusername. (hotcopy still does).
     fixed bug in mysql handler which caused some passwords to not work.
         (.my.cnf files now have double quotes around password)
@@ -368,15 +398,15 @@ version 0.6 -- June 16 2005
 
 version 0.5 -- April 12 2005
     rdiff handler works when remote sshd has a banner
-    rdiff handler supports local dest 
+    rdiff handler supports local dest
     logfile is created if it doesn't exist
-    added "when = hourly" 
+    added "when = hourly"
     added optional 'nicelevel' to rdiff handler
     fixed bug where actions were not run in numeric order.
     improved 'when' parsing.
 
 version 0.4.4 -- March 18 2005
-    results of handlers are now read line by line. 
+    results of handlers are now read line by line.
     changes to rdiff handler: added "options", and "keep" is
         not necessarily days now (ie, it will pass straight through to
         rdiff-backup if the keep has a unit on it, otherwise it adds the 'D').
@@ -384,7 +414,7 @@ version 0.4.4 -- March 18 2005
     added maildir handler (very specialized handler)
     added --run option (runs the specified action file)
     improved sys handler, now uses hwinfo
-    added subversion hotbackup handler, svn. 
+    added subversion hotbackup handler, svn.
     added PATH to cron.d file, which fixes file not found errors.
 
 version 0.4.2 -- Jan 6 2005
@@ -397,7 +427,7 @@ version 0.4.1 -- Jan 3 2005
     fixed major bug, 'when' actually works now.
     replaced debug function with debug, info, warning, error, fatal.
     added --now option to force all actions to be performed now.
-    
+
 version 0.4 -- Dec 26 2004
     added "when" option, so that all configs can specify when
         they are to be run.
@@ -405,7 +435,7 @@ version 0.4 -- Dec 26 2004
     added .sys handler (hardware, packages, partitions).
 
 version 0.3.4 -- Dec 8 2004
-    fixed numerical variable quoting compatibility with older wc    
+    fixed numerical variable quoting compatibility with older wc
     fixed stderr redirect bug
     some comments in example.rdiff
 
@@ -428,7 +458,7 @@ version 0.3.1 -- Sept 5 2004
     force only root can read /etc/backup.d/*
     fixed missing equals symbols in example.rdiff
     changed backupninja executable to be /usr/sbin rather than /usr/bin
-    
+
 version 0.3 -- Oct 20 2004
     ** IMPORTANT ** all config files are now ini style, not apache style
     rewrote all scripts in bash for portability
@@ -440,7 +470,7 @@ version 0.2 -- Oct 14 2004
     fixed bug: removed printr of excludes (!)
     added support for changing the user/group in rdiff sources.
     added support for .mysql config files.
-    
+
 version 0.1 -- Oct 8 2004
-    initial release 
+    initial release