support new duplicity versions:

[matthijs/upstream/backupninja.git] / ChangeLog

diff --git a/ChangeLog b/ChangeLog
index 6ad819e60c21f75689fa12941198e65f2455ed19..9c7770d9427ef33be6ab6e2a74a618c831005d86 100644 (file)
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,33 +1,85 @@
-version 0.9.5 -- unreleased
-    ninjareport
-        . Added first draft of method to aggregate reports from many servers into
-          one email. Requires logtail, rsync, configuration of reporthost, 
-          reportdirectory and reportuser in backupninja.conf. Configure cron to
-          run once a day, and individual backupninjas not to report by email their
-          status, then enjoy one email report from all hosts, rather than multiple
+version 0.9.6 -- unreleased
+    backupninja changes
+
+    handler changes
+       dup:
+        . General cleanup
+        . Better support for new duplicity (>= 0.4.4) command line syntax:
+          run remove-older-than when $keep is not set to yes (Closes: #458816),
+          and run "duplicity cleanup" before any other duplicity command; both
+          only trigger a warning on failure, since they should not stop backups
+          from being done. Also migrated full/incremental backup switch to the
+          new syntax.
+       rdiff:
+        . Fixed ignore_version default value missing
+        . Add patch from Matthew Palmer to rdiff handler to incorporate sshoptions
+          into options via remote-schema not already specified (Closes: #424639)
+       wget:
+        . New handler from rhatto designed to incrementally pull content from
+          a website to a local folder, based on the rsync handler
+
+version 0.9.5 -- December 2, 2007

     backupninja changes
         . Fixed checks on configuration files permissions, since the patch
           applied to fix #370396 broke this, especially for configuration files
           created with permissions 000 by an older ninjahelper version.
     backupninja changes
         . Fixed checks on configuration files permissions, since the patch
           applied to fix #370396 broke this, especially for configuration files
           created with permissions 000 by an older ninjahelper version.

-        . Enhanced portability for other platforms 
+        . Enhanced portability for other platforms
+        . Added quoting because it was needed to prevent shell expansion, broking the
+           toint function sometimes (Closes: Trac#11)
+        . Fixed reportspace option (Closes: Trac#10)
+        . Fixed ldap handler not recognizing database suffix (Closes: Trac#28)

     handler changes
     handler changes

+       dup:
+        . Support duplicity >= 0.4.3 invocation syntax (--ssh-command option
+          is not supported anymore) (Closes: #447425)
+        . New tmpdir configuration option, very useful in case duplicity tends
+          to fill up /tmp.

         ldap:
         . Fixed shell command quoting issues, missing 'then' clauses, cleaned up
         ldap:
         . Fixed shell command quoting issues, missing 'then' clauses, cleaned up

-          compress=yes to be less redundant and not create empty uncompressed file
+          compress=yes to be less redundant and not create empty uncompressed
+          file (Closes: #394935)
+        . Fixed ninjahelper to properly set compress option, standardized on yes/no
+          instead of on/off
+        . Fixed problem that caused combination of slapcat and compress to not work
+          together (Closes: Trac#29)
+        . Applied patch from romain.tartiere@healthgrid.org to fix the SSL/TLS options
+          to be correct, also set TLS to be the default over SSL (Closes: Trac#13)
+       maildir:
+        . Added an examples file (Closes: Trac#23)
+        . Applied patch from Anarcat that fixes the cp/mkdir calls to not use GNU
+          coreutils options, as well as some bashisms (Closes: Trac#24)
+        . Fix test mode (Closes: Trac#25)

         mysql:
         . Fixed case where odd combination of configuration options caused sqldump
           backups to get overwritten with an empty file (Closes: #402679)
         mysql:
         . Fixed case where odd combination of configuration options caused sqldump
           backups to get overwritten with an empty file (Closes: #402679)

+        . Added 'nodata' option to enable you to specify tables that you want to omit
+          the data from a backup, but still backup the table structure. This is very
+          useful in cases where tables contain large amounts of cache data. See the
+          example.mysql for options, thanks Daniel Bonniot (Closes: #408829)
+        . Enhance code for selecting databases by asking MySQL not to give us the
+          header (-N), to not draw pretty boxes around the output (-B), send the query
+          via -e instead of a pipe and ensure MySQL listens to -B. Thanks to
+          Matthew Palmer (Closes: #452039).

        pgsql:
         . Support configuring PGSQLUSER for real, and document it a bit; this
           broken support actually prevented pgsql handler to work for VServers
           (Closes: #396578)
        pgsql:
         . Support configuring PGSQLUSER for real, and document it a bit; this
           broken support actually prevented pgsql handler to work for VServers
           (Closes: #396578)

-       rdiff:
+       rdiff-backup:

         . Added cstream support to allow for bandwidth limiting
         . Handle "keep = yes" to disable old backups removal (Closes: #424633)
         . Added cstream support to allow for bandwidth limiting
         . Handle "keep = yes" to disable old backups removal (Closes: #424633)

-       rub
+        . Add configuration option to allow you to disable the version check
+          as in some instances this may be an ok scenario (Closes: #424632)
+        . Added local destination support to helper (Closes: Trac#4)
+        . Allow exclude-only configurations (Closes: Trac#21)
+       rub/rsync

         . Fixed typo in rub handler that caused it to not work
         . Changed to use lib/vserver code
         . Fixed fsck error
         . Fixed typo in rub handler that caused it to not work
         . Changed to use lib/vserver code
         . Fixed fsck error

+        . Fixed integer comparison (Closes: Trac#3)
+        . Renamed handler to 'rsync', replaces outdated rub handler
+        . updated examples/Makefile.am and handlers/Makefile.am to include
+          rsnap/rsync (Closes: #440554)
+        . Added example.rsync configuration file

        sys:
         . Fixed typo breaking things for VServers.
         . Fix bug when vrootdir is on its own partition (Closes: #395928)
        sys:
         . Fixed typo breaking things for VServers.
         . Fix bug when vrootdir is on its own partition (Closes: #395928)


@@ -39,10 +91,17 @@ version 0.9.5 -- unreleased
         . Fixed example in example.sys to detail the __star__ in partitionsfile and
           note why its necessary (Closes: #409192)
         . Force C locale for sfdisk to ensure english words are found in grep
         . Fixed example in example.sys to detail the __star__ in partitionsfile and
           note why its necessary (Closes: #409192)
         . Force C locale for sfdisk to ensure english words are found in grep

+        . Make directory where output is placed configurable, and create the parent dir
+          if it doesn't exist (Closes: Trac#1)
+    ninjareport
+        . Added first draft of method to aggregate reports from many servers into
+          one email. Requires logtail, rsync, configuration of reporthost,
+          reportdirectory and reportuser in backupninja.conf. Configure cron to
+          run once a day, and individual backupninjas not to report by email their
+          status, then enjoy one email report from all hosts, rather than multiple

     fixed 'make install' bug that failed if /etc/backup.d already existed
     changed spaces to tabs in Makefile.am
     fixed 'make install' bug that failed if /etc/backup.d already existed
     changed spaces to tabs in Makefile.am

-    updated examples/Makefile.am and handlers/Makefile.am to include rsnap/rub files
-    
+    updated redhat spec file (thanks Adam Monsen)

 
 version 0.9.4 -- October 6th, 2006
     backupninja changes
 
 version 0.9.4 -- October 6th, 2006
     backupninja changes


@@ -52,7 +111,7 @@ version 0.9.4 -- October 6th, 2006
         . Add admingroup option to configuration to allow a group that can
           read/write configurations (instead of only allowing root). Checks
           and complains about group-readable files only when the group differs
         . Add admingroup option to configuration to allow a group that can
           read/write configurations (instead of only allowing root). Checks
           and complains about group-readable files only when the group differs

-          from the one in the configuration file (default is root as before). 
+          from the one in the configuration file (default is root as before).

           Thanks to Martin Krafft for the patch (Closes: #370396).
         . When determining which backup actions to make, find now follows
           symlinks for $configdirectory
           Thanks to Martin Krafft for the patch (Closes: #370396).
         . When determining which backup actions to make, find now follows
           symlinks for $configdirectory


@@ -66,7 +125,7 @@ version 0.9.4 -- October 6th, 2006
        Added rsnap handler:
         . rotated rsync snapshops
         . code from paulv@bikkel.org
        Added rsnap handler:
         . rotated rsync snapshops
         . code from paulv@bikkel.org

-       Added rub handler: 
+       Added rub handler:

         . alternative to rsnap
         . code from rhatto@riseup.net
        mysql:
         . alternative to rsnap
         . code from rhatto@riseup.net
        mysql:


@@ -82,7 +141,7 @@ version 0.9.4 -- October 6th, 2006
         . Fixed shell expansion, thanks Thomas Kotzian (Closes: #363297)
         . postgres user UID is now the one from inside the vserver if necessary
         . Compress now happens in-line to save some disk space (Closes: #370778)
         . Fixed shell expansion, thanks Thomas Kotzian (Closes: #363297)
         . postgres user UID is now the one from inside the vserver if necessary
         . Compress now happens in-line to save some disk space (Closes: #370778)

-        . $PGSQLUSER is used instead of hardcoding user 'postgres' (although this is the default) 
+        . $PGSQLUSER is used instead of hardcoding user 'postgres' (although this is the default)

        svn:
         . Fixed inversed vsname emptiness check
        rdiff:
        svn:
         . Fixed inversed vsname emptiness check
        rdiff:


@@ -125,7 +184,7 @@ version 0.9.4 -- October 6th, 2006
        vserver:
         . init_vservers: fixed Debian bug #351083 (improper readlink syntax)
         . found_vservers: escaped special grep repetition character +
        vserver:
         . init_vservers: fixed Debian bug #351083 (improper readlink syntax)
         . found_vservers: escaped special grep repetition character +

-        . forced mktemp to use a template with a name to be more compatible with 
+        . forced mktemp to use a template with a name to be more compatible with

           different versions of mktemp, thanks anarcat
     ninjahelper changes
         . Recursively ignore subdirs in /etc/backup.d (Closes: #361102)
           different versions of mktemp, thanks anarcat
     ninjahelper changes
         . Recursively ignore subdirs in /etc/backup.d (Closes: #361102)


@@ -142,7 +201,7 @@ version 0.9.4 -- October 6th, 2006
     changed /etc/backup.d permissions to 0770 (for admingroup)
     minor documentation fixes
     improved RPM build process allowing 'make rpm-package' and 'make
     changed /etc/backup.d permissions to 0770 (for admingroup)
     minor documentation fixes
     improved RPM build process allowing 'make rpm-package' and 'make

-    srpm-package' targets, also fixes permissions on man directories, 
+    srpm-package' targets, also fixes permissions on man directories,

     cleans up RPM-related files during distclean, and adds default
     EDITOR for "autogen.sh -f" if none is set. (thanks Robert Napier)
 
     cleans up RPM-related files during distclean, and adds default
     EDITOR for "autogen.sh -f" if none is set. (thanks Robert Napier)
 


@@ -191,7 +250,7 @@ version 0.9.3 -- February 1st, 2006
         . init_vservers: warn if vservers are enabled but no vserver is found
         . new function: vservers_exist
     known bugs:
         . init_vservers: warn if vservers are enabled but no vserver is found
         . new function: vservers_exist
     known bugs:

-        easydialog: 
+        easydialog:

          . formDisplay does not return exit status.
 
 version 0.9.2 -- December 29, 2005
          . formDisplay does not return exit status.
 
 version 0.9.2 -- December 29, 2005


@@ -205,7 +264,7 @@ version 0.9.2 -- December 29, 2005
         trac:
             . mkdir subdirectory problem fixed
         duplicity:
         trac:
             . mkdir subdirectory problem fixed
         duplicity:

-            . globbing support fixed in include and exclude options 
+            . globbing support fixed in include and exclude options

             . different signing and encrypting key support added
             . fixed erroneous comments in example.dup about the way
               GnuPG-related options are used
             . different signing and encrypting key support added
             . fixed erroneous comments in example.dup about the way
               GnuPG-related options are used


@@ -219,12 +278,12 @@ version 0.9.2 -- December 29, 2005
         rdiff-backup:
             . used to expand '*' in default source directories
             . the "Cancel" buttons used to have a weird behaviour
         rdiff-backup:
             . used to expand '*' in default source directories
             . the "Cancel" buttons used to have a weird behaviour

-            . updated to include Vserver selection 
+            . updated to include Vserver selection

         pgsql:
         pgsql:

-            . forbid the user to choose an empty database set 
+            . forbid the user to choose an empty database set

             . "Cancel" button now does what it is meant to do
         mysql:
             . "Cancel" button now does what it is meant to do
         mysql:

-            . enhanced for vserver support 
+            . enhanced for vserver support

             . now able to select databases and dump directory
         duplicity:
             . new handler added (with Vserver support)
             . now able to select databases and dump directory
         duplicity:
             . new handler added (with Vserver support)


@@ -240,20 +299,20 @@ version 0.9.1 -- November 05 2005
     changed subversion handler to use svnadmin hotcopy instead of
             the unsupported hot-copy.py script, which was moved in Debian
     update rdiff ninjahelper
     changed subversion handler to use svnadmin hotcopy instead of
             the unsupported hot-copy.py script, which was moved in Debian
     update rdiff ninjahelper

-            now detects and auto-install rdiff-backup on the remote 
+            now detects and auto-install rdiff-backup on the remote

             machine if possible, also tests the remote backup directory
             and offers to create it if it doesn't exist
 
 version 0.9 -- October 19 2005
     *** IMPORTANT CHANGE, UPGRADE AT ONCE ***
             machine if possible, also tests the remote backup directory
             and offers to create it if it doesn't exist
 
 version 0.9 -- October 19 2005
     *** IMPORTANT CHANGE, UPGRADE AT ONCE ***

-     fixed insecure temporary file creation 
+     fixed insecure temporary file creation

     *****************************************
     removed erroneous magic file marker in pgsql handler
     fixed incorrect find positional
     changed direct grep of /etc/passwd to getent passwd.
     rdiff helper has much better information on failed ssh attempt
         (patch from cmccallum@thecsl.org).
     *****************************************
     removed erroneous magic file marker in pgsql handler
     fixed incorrect find positional
     changed direct grep of /etc/passwd to getent passwd.
     rdiff helper has much better information on failed ssh attempt
         (patch from cmccallum@thecsl.org).

-    rdiff handler now supports remote source and local dest. 
+    rdiff handler now supports remote source and local dest.

         (patch from cmccallum@thecsl.org).
     man pages are greatly improved.
 
         (patch from cmccallum@thecsl.org).
     man pages are greatly improved.
 


@@ -302,7 +361,7 @@ version 0.6 -- June 16 2005
         slapcat), restart, passwordfile and binddn. Default backup method
         is set to ldapsearch as this is safer
     ******************************************************************
         slapcat), restart, passwordfile and binddn. Default backup method
         is set to ldapsearch as this is safer
     ******************************************************************

-    NOTE: to get the previous default behavior with the ldap handler, 
+    NOTE: to get the previous default behavior with the ldap handler,

     you must set "method = slapcat". The new default is ldapsearch.
     ******************************************************************
     implemented fix so that the main script will echo fatal errors rather
     you must set "method = slapcat". The new default is ldapsearch.
     ******************************************************************
     implemented fix so that the main script will echo fatal errors rather


@@ -318,10 +377,10 @@ version 0.6 -- June 16 2005
         added "testconnect" option
         added "sshoptions" option (will be passed to ssh/scp)
         added "bandwidthlimit" option
         added "testconnect" option
         added "sshoptions" option (will be passed to ssh/scp)
         added "bandwidthlimit" option

-    example.dup example config file for duplicity handler 
+    example.dup example config file for duplicity handler

     added trac (http://trac.edgewall.com/) environment handler (thanks Charles Lepple!)
     added configfile option to mysql handler
     added trac (http://trac.edgewall.com/) environment handler (thanks Charles Lepple!)
     added configfile option to mysql handler

-        the default is /etc/mysql/debian.cnf. with this, 
+        the default is /etc/mysql/debian.cnf. with this,

         sqldump doesn't need dbusername. (hotcopy still does).
     fixed bug in mysql handler which caused some passwords to not work.
         (.my.cnf files now have double quotes around password)
         sqldump doesn't need dbusername. (hotcopy still does).
     fixed bug in mysql handler which caused some passwords to not work.
         (.my.cnf files now have double quotes around password)


@@ -329,15 +388,15 @@ version 0.6 -- June 16 2005
 
 version 0.5 -- April 12 2005
     rdiff handler works when remote sshd has a banner
 
 version 0.5 -- April 12 2005
     rdiff handler works when remote sshd has a banner

-    rdiff handler supports local dest 
+    rdiff handler supports local dest

     logfile is created if it doesn't exist
     logfile is created if it doesn't exist

-    added "when = hourly" 
+    added "when = hourly"

     added optional 'nicelevel' to rdiff handler
     fixed bug where actions were not run in numeric order.
     improved 'when' parsing.
 
 version 0.4.4 -- March 18 2005
     added optional 'nicelevel' to rdiff handler
     fixed bug where actions were not run in numeric order.
     improved 'when' parsing.
 
 version 0.4.4 -- March 18 2005

-    results of handlers are now read line by line. 
+    results of handlers are now read line by line.

     changes to rdiff handler: added "options", and "keep" is
         not necessarily days now (ie, it will pass straight through to
         rdiff-backup if the keep has a unit on it, otherwise it adds the 'D').
     changes to rdiff handler: added "options", and "keep" is
         not necessarily days now (ie, it will pass straight through to
         rdiff-backup if the keep has a unit on it, otherwise it adds the 'D').


@@ -345,7 +404,7 @@ version 0.4.4 -- March 18 2005
     added maildir handler (very specialized handler)
     added --run option (runs the specified action file)
     improved sys handler, now uses hwinfo
     added maildir handler (very specialized handler)
     added --run option (runs the specified action file)
     improved sys handler, now uses hwinfo

-    added subversion hotbackup handler, svn. 
+    added subversion hotbackup handler, svn.

     added PATH to cron.d file, which fixes file not found errors.
 
 version 0.4.2 -- Jan 6 2005
     added PATH to cron.d file, which fixes file not found errors.
 
 version 0.4.2 -- Jan 6 2005


@@ -358,7 +417,7 @@ version 0.4.1 -- Jan 3 2005
     fixed major bug, 'when' actually works now.
     replaced debug function with debug, info, warning, error, fatal.
     added --now option to force all actions to be performed now.
     fixed major bug, 'when' actually works now.
     replaced debug function with debug, info, warning, error, fatal.
     added --now option to force all actions to be performed now.

-    
+

 version 0.4 -- Dec 26 2004
     added "when" option, so that all configs can specify when
         they are to be run.
 version 0.4 -- Dec 26 2004
     added "when" option, so that all configs can specify when
         they are to be run.


@@ -366,7 +425,7 @@ version 0.4 -- Dec 26 2004
     added .sys handler (hardware, packages, partitions).
 
 version 0.3.4 -- Dec 8 2004
     added .sys handler (hardware, packages, partitions).
 
 version 0.3.4 -- Dec 8 2004

-    fixed numerical variable quoting compatibility with older wc    
+    fixed numerical variable quoting compatibility with older wc

     fixed stderr redirect bug
     some comments in example.rdiff
 
     fixed stderr redirect bug
     some comments in example.rdiff
 


@@ -389,7 +448,7 @@ version 0.3.1 -- Sept 5 2004
     force only root can read /etc/backup.d/*
     fixed missing equals symbols in example.rdiff
     changed backupninja executable to be /usr/sbin rather than /usr/bin
     force only root can read /etc/backup.d/*
     fixed missing equals symbols in example.rdiff
     changed backupninja executable to be /usr/sbin rather than /usr/bin

-    
+

 version 0.3 -- Oct 20 2004
     ** IMPORTANT ** all config files are now ini style, not apache style
     rewrote all scripts in bash for portability
 version 0.3 -- Oct 20 2004
     ** IMPORTANT ** all config files are now ini style, not apache style
     rewrote all scripts in bash for portability


@@ -401,7 +460,7 @@ version 0.2 -- Oct 14 2004
     fixed bug: removed printr of excludes (!)
     added support for changing the user/group in rdiff sources.
     added support for .mysql config files.
     fixed bug: removed printr of excludes (!)
     added support for changing the user/group in rdiff sources.
     added support for .mysql config files.

-    
+

 version 0.1 -- Oct 8 2004
 version 0.1 -- Oct 8 2004

-    initial release 
+    initial release