\begin{abstract}
%\boldmath
-The abstract goes here.
+\CLaSH\ is a functional hardware description language that borrows both its
+syntax and semantics from the functional programming language Haskell. The use of polymorphism and higher-order functions allow a circuit designer to describe more abstract and general specifications than are possible in the traditional hardware description languages.
+
+Circuit descriptions can be translated to synthesizable VHDL using the prototype \CLaSH\ compiler. As the circuit descriptions are made in plain Haskell, simulations can also be compiled by any Haskell compiler.
\end{abstract}
% IEEEtran.cls defaults to using nonbold math in the Abstract.
% This preserves the distinction between vectors and scalars. However,
extensive support for choice-elements is new in the domain of functional
hardware description languages. As the hardware descriptions are plain Haskell
functions, these descriptions can be compiled for simulation using an
-optimizing Haskell compiler such as the Glasgow Haskell Compiler (\GHC).
+optimizing Haskell compiler such as the Glasgow Haskell Compiler (\GHC)~\cite{ghc}.
Where descriptions in a conventional hardware description language have an
explicit clock for the purpose state and synchronicity, the clock is implied
netlist. This research also features a prototype translator called \CLaSH\
(pronounced: clash), which converts the Haskell code to equivalently behaving
synthesizable \VHDL\ code, ready to be converted to an actual netlist format
-by any (optimizing) \VHDL\ synthesis tool.
+by an (optimizing) \VHDL\ synthesis tool.
\section{Hardware description in Haskell}
names for existing types, where synonyms are completely interchangeable
and renaming constructs need explicit conversions. Therefore, these do not
need any particular translation, a synonym or renamed type will just use
- the same representation as the original type. The distinction between a
- renaming and a synonym does no longer matter in hardware and can be
- disregarded in the translation process. For algebraic types, we can make
- the following distinction:
+ the same representation as the original type. For algebraic types, we can
+ make the following distinctions:
\begin{xlist}
\item[\bf{Single constructor}]
currently supported.
\end{xlist}
- \subsection{Polymorphic functions}
- A powerful construct in most functional language is polymorphism.
- This means the arguments of a function (and consequentially, values
- within the function as well) do not need to have a fixed type.
- Haskell supports \emph{parametric polymorphism}, meaning a
- function's type can be parameterized with another type.
-
- As an example of a polymorphic function, consider the following
- \hs{append} function's type:
-
- \comment{TODO: Use vectors instead of lists?}
+ \subsection{Polymorphism}
+ A powerful construct in most functional languages is polymorphism, it
+ allows a function to handle values of different data types in a uniform
+ way. Haskell supports \emph{parametric polymorphism}~\cite{polymorphism},
+ meaning functions can be written without mention of any specific type and
+ can be used transparently with any number of new types.
+ As an example of a parametric polymorphic function, consider the type of
+ the following \hs{append} function, which appends an element to a vector:
\begin{code}
append :: [a|n] -> a -> [a|n + 1]
\end{code}
This type is parameterized by \hs{a}, which can contain any type at
- all. This means that append can append an element to a list,
- regardless of the type of the elements in the list (but the element
- added must match the elements in the list, since there is only one
- \hs{a}).
-
- This kind of polymorphism is extremely useful in hardware designs to
- make operations work on a vector without knowing exactly what elements
- are inside, routing signals without knowing exactly what kinds of
- signals these are, or working with a vector without knowing exactly
- how long it is. Polymorphism also plays an important role in most
- higher order functions, as we will see in the next section.
-
- The previous example showed unconstrained polymorphism \comment{(TODO: How
- is this really called?)}: \hs{a} can have \emph{any} type.
- Furthermore,Haskell supports limiting the types of a type parameter to
- specific class of types. An example of such a type class is the
- \hs{Num} class, which contains all of Haskell's numerical types.
-
- Now, take the addition operator, which has the following type:
-
+ all. This means that \hs{append} can append an element to a vector,
+ regardless of the type of the elements in the list (as long as the type of
+ the value to be added is of the same type as the values in the vector).
+ This kind of polymorphism is extremely useful in hardware designs to make
+ operations work on a vector without knowing exactly what elements are
+ inside, routing signals without knowing exactly what kinds of signals
+ these are, or working with a vector without knowing exactly how long it
+ is. Polymorphism also plays an important role in most higher order
+ functions, as we will see in the next section.
+
+ Another type of polymorphism is \emph{ad-hoc
+ polymorphism}~\cite{polymorphism}, which refers to polymorphic
+ functions which can be applied to arguments of different types, but which
+ behave differently depending on the type of the argument to which they are
+ applied. In Haskell, ad-hoc polymorphism is achieved through the use of
+ type classes, where a class definition provides the general interface of a
+ function, and class instances define the functionality for the specific
+ types. An example of such a type class is the \hs{Num} class, which
+ contains all of Haskell's numerical operations. A developer can make use
+ of this ad-hoc polymorphism by adding a constraint to a parametrically
+ polymorphic type variable. Such a constraint indicates that the type
+ variable can only be instantiated to a type whose members supports the
+ overloaded functions associated with the type class.
+
+ As an example we will take a look at type signature of the function
+ \hs{sum}, which sums the values in a vector:
\begin{code}
- (+) :: Num a => a -> a -> a
+ sum :: Num a => [a|n] -> a
\end{code}
This type is again parameterized by \hs{a}, but it can only contain
- types that are \emph{instances} of the \emph{type class} \hs{Num}.
- Our numerical built-in types are also instances of the \hs{Num}
+ types that are \emph{instances} of the \emph{type class} \hs{Num}, so that
+ we know that the addition (+) operator is defined for that type.
+ \CLaSH's built-in numerical types are also instances of the \hs{Num}
class, so we can use the addition operator on \hs{SizedWords} as
- well as on {SizedInts}.
+ well as on \hs{SizedInts}.
- In \CLaSH, unconstrained polymorphism is completely supported. Any
- function defined can have any number of unconstrained type
- parameters. The \CLaSH\ compiler will infer the type of every such
- argument depending on how the function is applied. There is one
- exception to this: The top level function that is translated, can
- not have any polymorphic arguments (since it is never applied, so
- there is no way to find out the actual types for the type
- parameters).
+ In \CLaSH, parametric polymorphism is completely supported. Any function
+ defined can have any number of unconstrained type parameters. The \CLaSH\
+ compiler will infer the type of every such argument depending on how the
+ function is applied. There is one exception to this: The top level
+ function that is translated, can not have any polymorphic arguments (as
+ they are never applied, so there is no way to find out the actual types
+ for the type parameters).
\CLaSH\ does not support user-defined type classes, but does use some
- of the builtin ones for its builtin functions (like \hs{Num} and
- \hs{Eq}).
+ of the built-in type classes for its built-in function, such as: \hs{Num}
+ for numerical operations, \hs{Eq} for the equality operators, and
+ \hs{Ord} for the comparison/order operators.
- \subsection{Higher order}
+ \subsection{Higher-order functions \& values}
Another powerful abstraction mechanism in functional languages, is
- the concept of \emph{higher order functions}, or \emph{functions as
+ the concept of \emph{higher-order functions}, or \emph{functions as
a first class value}. This allows a function to be treated as a
value and be passed around, even as the argument of another
- function. Let's clarify that with an example:
+ function. The following example should clarify this concept:
\begin{code}
- notList xs = map not xs
+ negVector xs = map not xs
\end{code}
- This defines a function \hs{notList}, with a single list of booleans
- \hs{xs} as an argument, which simply negates all of the booleans in
- the list. To do this, it uses the function \hs{map}, which takes
- \emph{another function} as its first argument and applies that other
- function to each element in the list, returning again a list of the
- results.
-
- As you can see, the \hs{map} function is a higher order function,
- since it takes another function as an argument. Also note that
- \hs{map} is again a polymorphic function: It does not pose any
- constraints on the type of elements in the list passed, other than
- that it must be the same as the type of the argument the passed
- function accepts. The type of elements in the resulting list is of
- course equal to the return type of the function passed (which need
- not be the same as the type of elements in the input list). Both of
- these can be readily seen from the type of \hs{map}:
-
- \begin{code}
- map :: (a -> b) -> [a] -> [b]
- \end{code}
-
- As an example from a common hardware design, let's look at the
- equation of a FIR filter.
-
- \begin{equation}
- y_t = \sum\nolimits_{i = 0}^{n - 1} {x_{t - i} \cdot h_i }
- \end{equation}
-
- A FIR filter multiplies fixed constants ($h$) with the current and
- a few previous input samples ($x$). Each of these multiplications
- are summed, to produce the result at time $t$.
-
- This is easily and directly implemented using higher order
- functions. Consider that the vector \hs{hs} contains the FIR
- coefficients and the vector \hs{xs} contains the current input sample
- in front and older samples behind. How \hs{xs} gets its value will be
- show in the next section about state.
+ The code above defines a function \hs{negVector}, which takes a vector of
+ booleans, and returns a vector where all the values are negated. It
+ achieves this by calling the \hs{map} function, and passing it
+ \emph{another function}, boolean negation, and the vector of booleans,
+ \hs{xs}. The \hs{map} function applies the negation function to all the
+ elements in the vector.
+
+ The \hs{map} function is called a higher-order function, since it takes
+ another function as an argument. Also note that \hs{map} is again a
+ parametric polymorphic function: It does not pose any constraints on the
+ type of the vector elements, other than that it must be the same type as
+ the input type of the function passed to \hs{map}. The element type of the
+ resulting vector is equal to the return type of the function passed, which
+ need not necessarily be the same as the element type of the input vector.
+ All of these characteristics can readily be inferred from the type
+ signature belonging to \hs{map}:
\begin{code}
- fir ... = foldl1 (+) (zipwith (*) xs hs)
+ map :: (a -> b) -> [a|n] -> [b|n]
\end{code}
- Here, the \hs{zipwith} function is very similar to the \hs{map}
- function: It takes a function two lists and then applies the
- function to each of the elements of the two lists pairwise
- (\emph{e.g.}, \hs{zipwith (+) [1, 2] [3, 4]} becomes
- \hs{[1 + 3, 2 + 4]}.
-
- The \hs{foldl1} function takes a function and a single list and applies the
- function to the first two elements of the list. It then applies to
- function to the result of the first application and the next element
- from the list. This continues until the end of the list is reached.
- The result of the \hs{foldl1} function is the result of the last
- application.
-
- As you can see, the \hs{zipwith (*)} function is just pairwise
- multiplication and the \hs{foldl1 (+)} function is just summation.
-
- To make the correspondence between the code and the equation even
- more obvious, we turn the list of input samples in the equation
- around. So, instead of having the the input sample received at time
- $t$ in $x_t$, $x_0$ now always stores the current sample, and $x_i$
- stores the $ith$ previous sample. This changes the equation to the
- following (Note that this is completely equivalent to the original
- equation, just with a different definition of $x$ that better suits
- the \hs{x} from the code):
-
- \begin{equation}
- y_t = \sum\nolimits_{i = 0}^{n - 1} {x_i \cdot h_i }
- \end{equation}
-
- So far, only functions have been used as higher order values. In
+ So far, only functions have been used as higher-order values. In
Haskell, there are two more ways to obtain a function-typed value:
partial application and lambda abstraction. Partial application
means that a function that takes multiple arguments can be applied
Here, the expression \hs{(+) 1} is the partial application of the
plus operator to the value \hs{1}, which is again a function that
- adds one to its argument.
-
- A labmda expression allows one to introduce an anonymous function
- in any expression. Consider the following expression, which again
- adds one to every element of a list:
+ adds one to its argument. A lambda expression allows one to introduce an
+ anonymous function in any expression. Consider the following expression,
+ which again adds one to every element of a vector:
\begin{code}
map (\x -> x + 1) xs
\end{code}
- Finally, higher order arguments are not limited to just builtin
+ Finally, higher order arguments are not limited to just built-in
functions, but any function defined in \CLaSH\ can have function
arguments. This allows the hardware designer to use a powerful
abstraction mechanism in his designs and have an optimal amount of
\item when the function is called, it should not have observable
side-effects.
\end{inparaenum}
- This purity property is important for functional languages, since it
- enables all kinds of mathematical reasoning that could not be guaranteed
- correct for impure functions. Pure functions are as such a perfect match
- for a combinatorial circuit, where the output solely depends on the
- inputs. When a circuit has state however, it can no longer be simply
- described by a pure function. Simply removing the purity property is not a
- valid option, as the language would then lose many of it mathematical
- properties. In an effort to include the concept of state in pure
+ % This purity property is important for functional languages, since it
+ % enables all kinds of mathematical reasoning that could not be guaranteed
+ % correct for impure functions.
+ Pure functions are as such a perfect match or a combinatorial circuit,
+ where the output solely depends on the inputs. When a circuit has state
+ however, it can no longer be simply described by a pure function.
+ % Simply removing the purity property is not a valid option, as the
+ % language would then lose many of it mathematical properties.
+ In an effort to include the concept of state in pure
functions, the current value of the state is made an argument of the
- function; the updated state becomes part of the result. A simple example
- is adding an accumulator register to the earlier multiply-accumulate
- circuit, of which the resulting netlist can be seen in
+ function; the updated state becomes part of the result. In this sense the
+ descriptions made in \CLaSH are the describing the combinatorial parts of
+ a mealy machine.
+
+ A simple example is adding an accumulator register to the earlier
+ multiply-accumulate circuit, of which the resulting netlist can be seen in
\Cref{img:mac-state}:
\begin{code}
- macS a b (State c) = (State c', outp)
+ macS (State c) a b = (State c', outp)
where
outp = mac a b c
c' = outp
\label{img:mac-state}
\end{figure}
- This approach makes the state of a circuit very explicit: which variables
- are part of the state is completely determined by the type signature. This
- approach to state is well suited to be used in combination with the
- existing code and language features, such as all the choice constructs, as
- state values are just normal values.
+ The \hs{State} keyword indicates which arguments are part of the current
+ state, and what part of the output is part of the updated state. This
+ aspect will also reflected in the type signature of the function.
+ Abstracting the state of a circuit in this way makes it very explicit:
+ which variables are part of the state is completely determined by the
+ type signature. This approach to state is well suited to be used in
+ combination with the existing code and language features, such as all the
+ choice constructs, as state values are just normal values. We can simulate
+ stateful descriptions using the recursive \hs{run} function:
+
+ \begin{code}
+ run f s (i:inps) = o : (run f s' inps)
+ where
+ (s', o) = f s i
+ \end{code}
+
+ The \hs{run} function maps a list of inputs over the function that a
+ developer wants to simulate, passing the state to each new iteration. Each
+ value in the input list corresponds to exactly one cycle of the (implicit)
+ clock. The result of the simulation is a list of outputs for every clock
+ cycle. As both the \hs{run} function and the hardware description are
+ plain hardware, the complete simulation can be compiled by an optimizing
+ Haskell compiler.
+
\section{\CLaSH\ prototype}
foo\par bar
+\section{Use cases}
+As an example of a common hardware design where the use of higher-order
+functions leads to a very natural description is a FIR filter, which is
+basically the dot-product of two vectors:
+
+\begin{equation}
+y_t = \sum\nolimits_{i = 0}^{n - 1} {x_{t - i} \cdot h_i }
+\end{equation}
+
+A FIR filter multiplies fixed constants ($h$) with the current
+and a few previous input samples ($x$). Each of these multiplications
+are summed, to produce the result at time $t$. The equation of a FIR
+filter is indeed equivalent to the equation of the dot-product, which is
+shown below:
+
+\begin{equation}
+\mathbf{x}\bullet\mathbf{y} = \sum\nolimits_{i = 0}^{n - 1} {x_i \cdot y_i }
+\end{equation}
+
+We can easily and directly implement the equation for the dot-product
+using higher-order functions:
+
+\begin{code}
+xs *+* ys = foldl1 (+) (zipWith (*) xs hs)
+\end{code}
+
+The \hs{zipWith} function is very similar to the \hs{map} function: It
+takes a function, two vectors, and then applies the function to each of
+the elements in the two vectors pairwise (\emph{e.g.}, \hs{zipWith (*) [1,
+2] [3, 4]} becomes \hs{[1 * 3, 2 * 4]} $\equiv$ \hs{[3,8]}).
+
+The \hs{foldl1} function takes a function, a single vector, and applies
+the function to the first two elements of the vector. It then applies the
+function to the result of the first application and the next element from
+the vector. This continues until the end of the vector is reached. The
+result of the \hs{foldl1} function is the result of the last application.
+As you can see, the \hs{zipWith (*)} function is just pairwise
+multiplication and the \hs{foldl1 (+)} function is just summation.
+
+Returning to the actual FIR filter, we will slightly change the
+equation belong to it, so as to make the translation to code more obvious.
+What we will do is change the definition of the vector of input samples.
+So, instead of having the input sample received at time
+$t$ stored in $x_t$, $x_0$ now always stores the current sample, and $x_i$
+stores the $ith$ previous sample. This changes the equation to the
+following (Note that this is completely equivalent to the original
+equation, just with a different definition of $x$ that will better suit
+the transformation to code):
+
+\begin{equation}
+y_t = \sum\nolimits_{i = 0}^{n - 1} {x_i \cdot h_i }
+\end{equation}
+
+Consider that the vector \hs{hs} contains the FIR coefficients and the
+vector \hs{xs} contains the current input sample in front and older
+samples behind. The function that shifts the input samples is shown below:
+
+\begin{code}
+x >> xs = x +> tail xs
+\end{code}
+
+Where the \hs{tail} function returns all but the first element of a
+vector, and the concatenate operator ($\succ$) adds a new element to the
+left of a vector. The complete definition of the FIR filter then becomes:
+
+\begin{code}
+fir (State (xs,hs)) x = (State (x >> xs,hs), xs *+* hs)
+\end{code}
+
+The resulting netlist of a 4-taps FIR filter based on the above definition
+is depicted in \Cref{img:4tapfir}.
+
+\begin{figure}
+\centerline{\includegraphics{4tapfir}}
+\caption{4-taps FIR Filter}
+\label{img:4tapfir}
+\end{figure}
+
\section{Related work}
Many functional hardware description languages have been developed over the
years. Early work includes such languages as $\mu$\acro{FP}~\cite{muFP}, an
extension of Backus' \acro{FP} language to synchronous streams, designed
particularly for describing and reasoning about regular circuits. The
Ruby~\cite{Ruby} language uses relations, instead of functions, to describe
-circuits, and has a particular focus on layout. \acro{HML}~\cite{HML2} is a
-hardware modeling language based on the strict functional language
-\acro{ML}, and has support for polymorphic types and higher-order functions.
-Published work suggests that there is no direct simulation support for
-\acro{HML}, and that the translation to \VHDL\ is only partial.
+circuits, and has a particular focus on layout.
+
+\acro{HML}~\cite{HML2} is a hardware modeling language based on the strict
+functional language \acro{ML}, and has support for polymorphic types and
+higher-order functions. Published work suggests that there is no direct
+simulation support for \acro{HML}, but that a description in \acro{HML} has to
+be translated to \VHDL\ and that the translated description can than be
+simulated in a \VHDL\ simulator. Also not all of the mentioned language
+features of \acro{HML} could be translated to hardware. The \CLaSH\ compiler
+on the other hand can correctly translate all of the language constructs
+mentioned in this paper to a netlist format.
Like this work, many functional hardware description languages have some sort
of foundation in the functional programming language Haskell.
Hawk~\cite{Hawk1} uses Haskell to describe system-level executable
specifications used to model the behavior of superscalar microprocessors. Hawk
specifications can be simulated, but there seems to be no support for
-automated circuit synthesis. The ForSyDe~\cite{ForSyDe2} system uses Haskell
-to specify abstract system models, which can (manually) be transformed into an
-implementation model using semantic preserving transformations. ForSyDe has
-several simulation and synthesis backends, though synthesis is restricted to
-the synchronous subset of the ForSyDe language.
+automated circuit synthesis.
+
+The ForSyDe~\cite{ForSyDe2} system uses Haskell to specify abstract system
+models, which can (manually) be transformed into an implementation model using
+semantic preserving transformations. ForSyDe has several simulation and
+synthesis backends, though synthesis is restricted to the synchronous subset
+of the ForSyDe language.
Lava~\cite{Lava} is a hardware description language that focuses on the
structural representation of hardware. Besides support for simulation and
projects / matthijs / master-project / dsd-paper.git / blobdiff