+++ /dev/null
-
-### main/02_exim4-config_options
-#################################
-
-
-# Defines the access control list that is run when an
-# SMTP MAIL command is received.
-#
-.ifndef MAIN_ACL_CHECK_MAIL
-MAIN_ACL_CHECK_MAIL = acl_check_mail
-.endif
-acl_smtp_mail = MAIN_ACL_CHECK_MAIL
-
-
-# Defines the access control list that is run when an
-# SMTP RCPT command is received.
-#
-.ifndef MAIN_ACL_CHECK_RCPT
-MAIN_ACL_CHECK_RCPT = acl_check_rcpt
-.endif
-acl_smtp_rcpt = MAIN_ACL_CHECK_RCPT
-
-
-# Defines the access control list that is run when an
-# SMTP DATA command is received.
-#
-.ifndef MAIN_ACL_CHECK_DATA
-MAIN_ACL_CHECK_DATA = acl_check_data
-.endif
-acl_smtp_data = MAIN_ACL_CHECK_DATA
-
-
-# Message size limit. The default (used when MESSAGE_SIZE_LIMIT
-# is unset) is 50 MB
-.ifdef MESSAGE_SIZE_LIMIT
-message_size_limit = MESSAGE_SIZE_LIMIT
-.endif
-
-
-# If you are running exim4-daemon-heavy or a custom version of Exim that
-# was compiled with the content-scanning extension, you can cause incoming
-# messages to be automatically scanned for viruses. You have to modify the
-# configuration in two places to set this up. The first of them is here,
-# where you define the interface to your scanner. This example is typical
-# for ClamAV; see the manual for details of what to set for other virus
-# scanners. The second modification is in the acl_check_data access
-# control list.
-
-# av_scanner = clamd:/tmp/clamd
-
-
-# For spam scanning, there is a similar option that defines the interface to
-# SpamAssassin. You do not need to set this if you are using the default, which
-# is shown in this commented example. As for virus scanning, you must also
-# modify the acl_check_data access control list to enable spam scanning.
-
-# spamd_address = 127.0.0.1 783
-
-# Domain used to qualify unqualified recipient addresses
-# If this option is not set, the qualify_domain value is used.
-# qualify_recipient = <value of qualify_domain>
-
-
-# Allow Exim to recognize addresses of the form "user@[10.11.12.13]",
-# where the domain part is a "domain literal" (an IP address) instead
-# of a named domain. The RFCs require this facility, but it is disabled
-# in the default config since it is seldomly used and frequently abused.
-# Domain literal support also needs a special router, which is automatically
-# enabled if you use the enable macro MAIN_ALLOW_DOMAIN_LITERALS.
-# Additionally, you might want to make your local IP addresses (or @[])
-# local domains.
-.ifdef MAIN_ALLOW_DOMAIN_LITERALS
-allow_domain_literals
-.endif
-
-
-# Do a reverse DNS lookup on all incoming IP calls, in order to get the
-# true host name. If you feel this is too expensive, the networks for
-# which a lookup is done can be listed here.
-.ifndef DC_minimaldns
-.ifndef MAIN_HOST_LOOKUP
-MAIN_HOST_LOOKUP = *
-.endif
-host_lookup = MAIN_HOST_LOOKUP
-.endif
-
-
-# In a minimaldns setup, update-exim4.conf guesses the hostname and
-# dumps it here to avoid DNS lookups being done at Exim run time.
-.ifdef MAIN_HARDCODE_PRIMARY_HOSTNAME
-primary_hostname = MAIN_HARDCODE_PRIMARY_HOSTNAME
-.endif
-
-# The settings below, which are actually the same as the defaults in the
-# code, cause Exim to make RFC 1413 (ident) callbacks for all incoming SMTP
-# calls. You can limit the hosts to which these calls are made, and/or change
-# the timeout that is used. If you set the timeout to zero, all RFC 1413 calls
-# are disabled. RFC 1413 calls are cheap and can provide useful information
-# for tracing problem messages, but some hosts and firewalls are
-# misconfigured to drop the requests instead of either answering or
-# rejecting them. This can result in a timeout instead of an immediate refused
-# connection, leading to delays on starting up SMTP sessions. (The default was
-# reduced from 30s to 5s for release 4.61.)
-# rfc1413_hosts = *
-# rfc1413_query_timeout = 5s
-
-# When using an external relay tester (such as rt.njabl.org and/or the
-# currently defunct relay-test.mail-abuse.org, the test may be aborted
-# since exim complains about "too many nonmail commands". If you want
-# the test to complete, add the host from where "your" relay tester
-# connects from to the MAIN_SMTP_ACCEPT_MAX_NOMAIL_HOSTS macro.
-# Please note that a non-empty setting may cause extra DNS lookups to
-# happen, which is the reason why this option is commented out in the
-# default settings.
-# MAIN_SMTP_ACCEPT_MAX_NOMAIL_HOSTS = !rt.njabl.org
-.ifdef MAIN_SMTP_ACCEPT_MAX_NOMAIL_HOSTS
-smtp_accept_max_nonmail_hosts = MAIN_SMTP_ACCEPT_MAX_NOMAIL_HOSTS
-.endif
-
-# By default, exim forces a Sender: header containing the local
-# account name at the local host name in all locally submitted messages
-# that don't have the local account name at the local host name in the
-# From: header, deletes any Sender: header present in the submitted
-# message and forces the envelope sender of all locally submitted
-# messages to the local account name at the local host name.
-# The following settings allow local users to specify their own envelope sender
-# in a locally submitted message. Sender: headers existing in a locally
-# submitted message are not removed, and no automatic Sender: headers
-# are added. These settings are fine for most hosts.
-# If you run exim on a classical multi-user systems where all users
-# have local mailboxes that can be reached via SMTP from the Internet
-# with the local FQDN as the domain part of the address, you might want
-# to disable the following three lines for traceability reasons.
-.ifndef MAIN_FORCE_SENDER
-local_from_check = false
-local_sender_retain = true
-untrusted_set_sender = *
-.endif
-
-
-# By default, Exim expects all envelope addresses to be fully qualified, that
-# is, they must contain both a local part and a domain. Configure exim
-# to accept unqualified addresses from certain hosts. When this is done,
-# unqualified addresses are qualified using the settings of qualify_domain
-# and/or qualify_recipient (see above).
-# sender_unqualified_hosts = <unset>
-# recipient_unqualified_hosts = <unset>
-
-
-# Configure Exim to support the "percent hack" for certain domains.
-# The "percent hack" is the feature by which mail addressed to x%y@z
-# (where z is one of the domains listed) is locally rerouted to x@y
-# and sent on. If z is not one of the "percent hack" domains, x%y is
-# treated as an ordinary local part. The percent hack is rarely needed
-# nowadays but frequently abused. You should not enable it unless you
-# are sure that you really need it.
-# percent_hack_domains = <unset>
-
-
-# Bounce handling
-.ifndef MAIN_IGNORE_BOUNCE_ERRORS_AFTER
-MAIN_IGNORE_BOUNCE_ERRORS_AFTER = 2d
-.endif
-ignore_bounce_errors_after = MAIN_IGNORE_BOUNCE_ERRORS_AFTER
-
-.ifndef MAIN_TIMEOUT_FROZEN_AFTER
-MAIN_TIMEOUT_FROZEN_AFTER = 7d
-.endif
-timeout_frozen_after = MAIN_TIMEOUT_FROZEN_AFTER
-
-.ifndef MAIN_FREEZE_TELL
-MAIN_FREEZE_TELL = postmaster
-.endif
-freeze_tell = MAIN_FREEZE_TELL
-
-
-# Define spool directory
-.ifndef SPOOLDIR
-SPOOLDIR = /var/spool/exim4
-.endif
-spool_directory = SPOOLDIR
-
-
-# trusted users can set envelope-from to arbitrary values
-.ifndef MAIN_TRUSTED_USERS
-MAIN_TRUSTED_USERS = uucp
-.endif
-trusted_users = MAIN_TRUSTED_USERS
-.ifdef MAIN_TRUSTED_GROUPS
-trusted_groups = MAIN_TRUSTED_GROUPS
-.endif
-
-
-# users in admin group can do many other things
-# admin_groups = <unset>
-
-
-# SMTP Banner. The example includes the Debian version in the SMTP dialog
-# MAIN_SMTP_BANNER = "${primary_hostname} ESMTP Exim ${version_number} (Debian package MAIN_PACKAGE_VERSION) ${tod_full}"
-# smtp_banner = $smtp_active_hostname ESMTP Exim $version_number $tod_full
projects / matthijs / servers / drsnuggles.git / blobdiff