# Blosxom Plug-in: feedback
# Author: Frank Hecker (http://www.hecker.org/)
#
# Version 0.23
package feedback;
use warnings;
# --- Configurable variables ---
# --- You *must* set the following variables properly for your blog ---
# Where should I keep the feedback hierarchy?
# (By default it goes in the Blosxom state directory. However you may
# prefer it to go in the same directory as the Blosxom data directory.
# If so, delete the following line and uncomment the line following it.)
$fb_dir = "$blosxom::plugin_state_dir/feedback";
# $fb_dir = "$blosxom::datadir/../feedback";
# --- Set the following variables according to your preferences ---
# Are comments and TrackBacks allowed? Set to zero to disable either or both.
my $allow_comments = 1;
my $allow_trackbacks = 1;
# Don't allow comments/TrackBacks if story is older than this (in seconds).
# (Set to zero to keep story open for comments/TrackBacks forever.)
my $comment_period = 90 * 86400; # 90 days
my $trackback_period = 90 * 86400; # 90 days
# Do Akismet checking of comments and/or TrackBacks for spam.
my $akismet_comments = 0;
my $akismet_trackbacks = 0;
# WordPress API key for use with Akismet.
# (Register at to get your own API key.)
my $wordpress_api_key = '';
# Do MT-blacklist checking of comments and/or TrackBacks for spam.
# NOTE: The MT-Blacklist file is no longer maintained; we suggest using
# Akismet instead.
my $blacklist_comments = 0;
my $blacklist_trackbacks = 0;
# Where can I find the local copy of the MT-Blacklist file?
my $blacklist_file = "$blosxom::plugin_state_dir/blacklist.txt";
# Send an email message to notify the blog owner of new comments and/or
# TrackBacks and (optionally) request approval of new comments/TrackBacks.
my $notify_comments = 0;
my $notify_trackbacks = 0;
my $moderate_comments = 1;
my $moderate_trackbacks = 1;
# Email address and SMTP server used for notifications and moderation requests.
my $address = 'jdoe@example.com';
my $smtp_server = 'smtp.example.com';
# Default values for fields not submitted with the comment or TrackBack ping.
my $default_name = "Someone";
my $default_blog_name = "An unnamed blog";
my $default_title = "an article";
# The formatting used for comments, i.e., how they are translated to (X)HTML.
# Valid choices at present are 'none', 'plaintext' and 'markdown'.
my $comment_format = 'plaintext';
# Should we accept and display commenter's email addresses? (The default is
# to support http/https URLs only; this may be the only option in future.)
my $allow_mailto = 0;
# --- You should not normally need to change the following variables ---
# What flavour should I consider an incoming TrackBack ping?
$trackback_flavour = "trackback";
# What file extension should I use for saved comments and TrackBacks?
my $fb_extension = "wb";
# What fields are used in the comments form?
my @comment_fields = qw! name url comment !;
# What fields are used by TrackBacks?
my @trackback_fields = qw! blog_name url title excerpt !;
# Limit all fields to this length or less (just in case).
my $max_param_length = 10000;
# --- Variables for use in flavour templates (e.g., as $feedback::foo) ---
# Comment and TrackBack fields, for use in the comment, preview, and
# trackback templates.
$name = '';
$name_link = ''; # Combines name and link for email/URL
$date = '';
$comment = '';
$blog_name = '';
$title = '';
$title_link = ''; # Combines title and link to article
$excerpt = '';
$url = ''; # Also used in $name_link, $title_link
# Field values for previewed comments, used in the commentform template.
$name_preview = '';
$comment_preview = '';
$url_preview = '';
# Message displayed in response to a comment submission (e.g., to display
# an error message), for use in the story or foot templates. The response is
# formatted for use in HTML/XHTML content.
$comment_response = '';
# XML message displayed in response to a TrackBack ping (e.g., to display
# an error message or indicate success), per the TrackBack Technical
# Specification .
$trackback_response = '';
# All comments and TrackBacks for a particular story, for use in the story
# template for an individual story page. Also includes content from the
# comments_head/comments_foot and trackbacks_head/trackbacks_foot templates.
$comments = '';
$trackbacks = '';
# Counts of comments and TrackBacks for a story, for use in the story
# template (e.g., for index and archive pages).
$comments_count = 0;
$trackbacks_count = 0;
$count = 0; # total of both
# Previewed comment for a particular story, for use in the story
# template for an individual story page.
$preview = '';
# Default comment submission form, for use in the foot template (for an
# individual story page). The plug-in sets this value to null if comments
# are disabled or in cases where the page is not for an individual story
# or the story is older than the allowed comment period.
$commentform = '';
# TrackBack discovery information, for use in the foot template (for
# an individual story page). The code sets this value to null if TrackBacks
# are disabled or in cases where the page is not for an individual story
# or the story is older than the allowed TrackBack period.
$trackbackinfo = '';
# --- External modules required ---
use CGI qw/:standard/;
use FileHandle;
use URI;
use URI::Escape;
# --- Global variables (used in interpolation) ---
use vars qw! $fb_dir $trackback_flavour $name $name_link $date $comment
$blog_name $title $name_preview $comment_preview $url_preview
$comment_response $trackback_response $comments $trackbacks
$comments_count $trackbacks_count $count $preview $commentform
$trackbackinfo !;
# --- Private static variables ---
# Spam blacklist array.
my @blacklist_entries = ();
# File handle for use in reading/writing the feedback file, etc.
my $fh = new FileHandle;
# Path and filename for the main feedback file for a story, and item name
# used in contructing filenames for files containing moderated items.
my $fb_path = '';
my $fb_fn = '';
# Whether comments or TrackBacks are closed for a given story.
my $closed_comments = 0;
my $closed_trackbacks = 0;
# --- Plug-in initialization ---
# Strip potentially confounding final slash from feedback directory path.
$fb_dir =~ s!/$!!;
# Strip potentially confounding initial period from file extension.
$fb_extension =~ s!^\.!!;
# Initialize the default templates; use $blosxom::template so we can leverage
# the Blosxom template subroutine (whether default or replaced by a plug-in).
my %template = ();
while () {
last if /^(__END__)?$/;
# TODO: Fix this to correctly handle empty flavours (i.e., no $txt).
my ($ct, $comp, $txt) = /^(\S+)\s(\S+)(?:\s(.*))?$/;
# my ($ct, $comp, $txt) = /^(\S+)\s(\S+)\s(.*)$/;
$txt = '' unless defined($txt);
$txt =~ s/\\n/\n/mg;
$blosxom::template{$ct}{$comp} = $txt;
}
# Moderation implies notification.
$notify_comments = 1 if $moderate_comments;
$notify_trackbacks = 1 if $moderate_trackbacks;
# --- Plug-in subroutines ---
# Create feedback directory if needed.
sub start {
# The $fb_dir variable must be set to activate feedback.
unless ($fb_dir) {
warn "feedback: " .
"The \$fb_dir configurable variable is not set; "
. "please set it to enable comments or TrackBacks.\n";
return 0;
}
# The value of $fb_dir must be a writeable directory.
if (-e $fb_dir && !(-d $fb_dir && -w $fb_dir)) {
warn "feedback: The feedback directory '$fb_dir' "
. "must be a writeable directory; please rename or remove it "
. "and Blosxom will create it properly for you.\n";
return 0;
}
# The $fb_dir does not yet exist, so Blosxom will create it.
unless (-e $fb_dir) {
return 0 unless (mk_feedback_dir($fb_dir));
}
return 1;
}
# Decide whether to close comments and TrackBacks for a story.
sub date {
my ($pkg, $file, $date_ref, $mtime, $dw, $mo, $mo_num, $da, $ti, $yr) = @_;
# A positive value of $comment_period represents the time in seconds
# during which posting comments or TrackBacks is allowed after a
# story has been published. (Note that updating a story has the effect
# of reopening the feedback period.) A zero or negative value for
# $comment_period means that posting feedback is always allowed.
if ($comment_period <= 0) {
$closed_comments = 0;
} elsif ($allow_comments && (time - $mtime) > $comment_period) {
$closed_comments = 1;
} else {
$closed_comments = 0;
}
# $trackback_period works the same way as $comment_period.
if ($trackback_period <= 0) {
$closed_trackbacks = 0;
} elsif ($allow_trackbacks && (time - $mtime) > $trackback_period) {
$closed_trackbacks = 1;
} else {
$closed_trackbacks = 0;
}
return 1;
}
# Parse posted TrackBacks and comments and take action as appropriate.
# Retrieve comments and TrackBacks and format according to the templates.
# Display a comment form and/or TrackBack URL as appropriate.
sub story {
my ($pkg, $path, $filename, $story_ref, $title_ref, $body_ref) = @_;
my $submission_type;
my $status_msg;
my $is_story_page;
# We have five possible tasks in this subroutine:
#
# * handle submitted TrackBack pings or comments (or related requests)
# * display previously-submitted TrackBacks or comments
# * display a comment being previewed
# * display a form for entering a comment (or editing a previewed one)
# * display information about submitting TrackBacks
#
# Exactly what we do depends whether we are rendering dynamically or
# statically and on the type of request (GET, HEAD, or POST) (when
# dynamically rendering), the Blosxom flavour, the parameters associated
# with the request, the age of the story, and the way the feedback
# plug-in itself is configured.
# Make $path empty if at top level, preceded by a single slash otherwise.
!defined($path) and $path = "";
$path =~ s!^/*!!; $path &&= "/$path";
# Set feedback path and filename for this story.
$fb_path = $path;
$fb_fn = $filename . '.' . $fb_extension;
# Determine whether this is an individual story page or not.
$is_story_page =
$blosxom::path_info =~ m!^(.*/)?(.+)\.(.+)$! ? 1 : 0;
# For dynamic rendering of an individual story page *only*, check to
# see if this is a feedback-related request, take action, and formulate
# a response.
#
# We have five possible cases: TrackBack ping, comment preview, comment
# post, moderator approval, and moderator rejection. These are
# distinguished based on the type of request (POST vs. GET/HEAD),
# the flavour (for TrackBack pings only), and the request parameters.
$submission_type = $comment_response = $trackback_response = '';
if ($blosxom::static_or_dynamic eq 'dynamic' && $is_story_page) {
($submission_type, $status_msg) = process_submission();
if ($submission_type eq 'trackback') {
$trackback_response = format_tb_response($status_msg);
return 1; # All done.
} elsif ($submission_type eq 'comment'
|| $submission_type eq 'preview'
|| $submission_type eq 'approve'
|| $submission_type eq 'reject') {
$comment_response = format_cmt_response($status_msg);
}
}
# Display previously-submitted comments and TrackBacks for this story.
# For index and and archive pages we just display counts of the comments
# and TrackBacks.
$comments = $trackbacks = '';
$comments_count = $trackbacks_count = 0;
if ($is_story_page) {
($comments, $comments_count, $trackbacks, $trackbacks_count) =
get_feedback($path);
} else {
($comments_count, $trackbacks_count) = count_feedback();
}
$count = $comments_count + $trackbacks_count;
# If we are previewing a comment then format the comment for display.
$preview = '';
if ($submission_type eq 'preview') {
$preview = get_preview($path);
}
# Display a form for comment submission, if we are on an individual
# story page and comments are (still) allowed. (If we are previewing
# a comment then the form will be pre-filled as appropriate.)
$commentform = '';
if ($is_story_page && $allow_comments) {
if ($closed_comments) {
$commentform =
"";
} else {
# Get the commentform template and interpolate variables in it.
$commentform =
&$blosxom::template($path,'commentform',$blosxom::flavour)
|| &$blosxom::template($path,'commentform','general');
$commentform = &$blosxom::interpolate($commentform);
}
}
# Display information on submitting TrackPack pings (including code for
# TrackBack autodiscovery), if we are on an individual story page and
# TrackBacks are (still) allowed.
$trackbackinfo = '';
if ($is_story_page && $allow_trackbacks) {
if ($closed_trackbacks) {
$trackbackinfo =
""
. "Trackbacks are closed for this story.
";
} else {
# Get the trackbackinfo template and interpolate variables in it.
$trackbackinfo =
&$blosxom::template($path,'trackbackinfo',$blosxom::flavour)
|| &$blosxom::template($path,'trackbackinfo','general');
$trackbackinfo = &$blosxom::interpolate($trackbackinfo);
}
}
# For interpolate_fancy to work properly when deciding whether to include
# certain content or not, the associated variables must be undefined if
# there is no actual content to be displayed.
$comment_response =~ m!^\s*$! and $comment_response = undef;
$comments =~ m!^\s*$! and $comments = undef;
$trackbacks =~ m!^\s*$! and $trackbacks = undef;
$preview =~ m!^\s*$! and $preview = undef;
$commentform =~ m!^\s*$! and $commentform = undef;
$trackbackinfo =~ m!^\s*$! and $trackbackinfo = undef;
return 1;
}
# --- Helper subroutines ---
# Process a submitted HTTP request and take whatever action is appropriate.
# Returns the type of submission: 'trackback', 'comment', 'preview',
# 'approve', 'reject', or null for a request not related to feedback.
# Also sets $comment_response and $trackback_response;
sub process_submission {
my $submission_type = '';
my $status_msg = '';
if (request_method() eq 'POST') {
# We have two possible cases: a TrackBack ping (identified by
# the flavour extension) or a submitted comment.
if ($blosxom::flavour eq $trackback_flavour) {
$status_msg = handle_feedback('trackback');
$submission_type = 'trackback';
} else {
# Comment posts may or may not use a particular flavour
# extension, so we check for the value of the 'plugin'
# hidden field (from the comment form).
my $plugin_param = sanitize_param(param('plugin'));
if ($plugin_param eq 'writeback') {
# Comment previews are distinguished from comment posts
# by the value of the 'submit' parameter associated with
# the 'Post' and 'Preview' form buttons.
my $submit_param = sanitize_param(param('submit'));
$status_msg = '';
if ($submit_param eq 'Preview') {
$status_msg = handle_feedback('preview');
$submission_type = 'preview';
} elsif ($submit_param eq 'Post') {
$status_msg = handle_feedback('comment');
$submission_type = 'comment';
} else {
$status_msg = "The submit parameter must have the value "
. "'Preview' or 'Post'";
}
}
}
} elsif (request_method() eq 'GET' || request_method() eq 'HEAD') {
my $moderate_param = sanitize_param(param('moderate'));
my $feedback_param = sanitize_param(param('feedback'));
if ($moderate_param) {
# We have two possible cases: moderator approval or rejection,
# distinguished based on the value of the 'moderate' parameter.
if (!$feedback_param) {
$status_msg =
"You must provide a 'feedback' parameter and item.";
} elsif ($moderate_param eq 'approve') {
$status_msg = approve_feedback($feedback_param);
$submission_type = 'approve';
} elsif ($moderate_param eq 'reject') {
$status_msg = reject_feedback($feedback_param);
$submission_type = 'reject';
} else {
$status_msg =
"'moderate' parameter must "
. "have the value 'approve' or 'reject'.";
}
}
}
return $submission_type, $status_msg;
}
# Retrieve comments and TrackBacks for a story and format them according
# to the appropriate templates for the story (based on the story's path).
# For comments we use the comment template for each individual comment,
# along with the optional comments_head and comments_foot templates (before
# and after the comments proper). For TrackBacks we use the corresponding
# trackback template for each TrackBack, together with the optional
# trackbacks_head and trackbacks_foot templates.
sub get_feedback {
my $path = shift;
my ($comments, $comments_count, $trackbacks, $trackbacks_count);
$comments = $trackbacks = '';
$comments_count = $trackbacks_count = 0;
# Retrieve the templates for individual comments and TrackBacks.
my $comment_template =
&$blosxom::template($path, 'comment', $blosxom::flavour)
|| &$blosxom::template($path, 'comment', 'general');
my $trackback_template =
&$blosxom::template($path, 'trackback', $blosxom::flavour)
|| &$blosxom::template($path, 'trackback', 'general');
# Open the feedback file (if it exists) and read any comments or
# TrackBacks. Note that we can distinguish comments from TrackBacks
# because comments have a 'comment' field and TrackBacks don't.
my %param = ();
if ($fh->open("$fb_dir$fb_path/$fb_fn")) {
foreach my $line (<$fh>) {
$line =~ /^(.+?): (.*)$/ and $param{$1} = $2;
if ( $line =~ /^-----$/ ) {
if ($param{'comment'}) {
$comment = format_comment($param{'comment'});
$date = format_date($param{'date'});
($name, $name_link) =
format_name($param{'name'}, $param{'url'});
my $cmt = $comment_template;
$cmt = &$blosxom::interpolate($cmt);
$comments .= $cmt;
$comments_count++;
} else {
$blog_name = format_blog_name($param{'blog_name'});
$excerpt = format_excerpt($param{'excerpt'});
$date = format_date($param{'date'});
($title, $title_link) =
format_title($param{'title'}, $param{'url'});
my $trackback = $trackback_template;
$trackback = &$blosxom::interpolate($trackback);
$trackbacks .= $trackback;
$trackbacks_count++;
}
%param = ();
}
}
}
return ($comments, $comments_count, $trackbacks, $trackbacks_count);
}
# Retrieve comments and TrackBacks for a story and (just) count them.
sub count_feedback {
my $comments_count = 0;
my $trackbacks_count = 0;
# Open the feedback file (if it exists) and count any comments or
# TrackBacks. Note that we can distinguish comments from TrackBacks
# because comments have a 'comment' field and TrackBacks don't.
my %param = ();
if ($fh->open("$fb_dir$fb_path/$fb_fn")) {
foreach my $line (<$fh>) {
$line =~ /^(.+?): (.*)$/ and $param{$1} = $2;
if ( $line =~ /^-----$/ ) {
if ($param{'comment'}) {
$comments_count++;
} else {
$trackbacks_count++;
}
%param = ();
}
}
}
return ($comments_count, $trackbacks_count);
}
# Format a previewed comment according to the appropriate preview template
# for the story (based on the story's path).
sub get_preview {
my $path = shift;
my $preview = '';
# Retrieve the comment template (also used for previewed comments).
my $comment_template =
&$blosxom::template($path, 'comment', $blosxom::flavour)
|| &$blosxom::template($path, 'comment', 'general');
# Format the previewed comment using the submitted values.
$comment = format_comment($comment_preview);
$date = format_date($date_preview);
($name, $name_link) =
format_name($name_preview, $url_preview);
$preview = &$blosxom::interpolate($comment_template);
return $preview;
}
# Create top-level directory to hold feedback files, and make it writeable.
sub mk_feedback_dir {
my $mkdir_r = mkdir("$fb_dir", 0755);
warn $mkdir_r
? "feedback: $fb_dir created.\n"
: "feedback: Could not create $fb_dir.\n";
$mkdir_r or return 0;
my $chmod_r = chmod 0755, $fb_dir;
warn $chmod_r
? "feedback: $fb_dir set to 0755 permissions.\n"
: "feedback: Could not set permissions on $fb_dir.\n";
$chmod_r or return 0;
warn "feedback: feedback is enabled!\n";
return 1;
}
# Create subdirectories of feedback directory as necessary.
sub mk_feedback_subdir {
my $dir = shift;
my $p = '';
return 1 if !defined($dir) or $dir eq '';
foreach (('', split /\//, $dir)) {
$p .= "/$_";
$p =~ s!^/!!;
return 0
unless (-d "$fb_dir/$p" or mkdir "$fb_dir/$p", 0755);
}
return 1;
}
# Process a submitted comment or TrackBack.
sub handle_feedback {
my $feedback_type = shift;
my $status_msg = '';
my $is_comment;
my $is_preview;
my $fb_item;
# Set up to handle either a comment, preview, or TrackBack as requested.
if ($feedback_type eq 'comment') {
$is_comment = 1;
$is_preview = 0;
} elsif ($feedback_type eq 'preview') {
$is_comment = 1;
$is_preview = 1;
} else {
$is_comment = 0;
$is_preview = 0;
}
my $allow = $is_comment ? $allow_comments : $allow_trackbacks;
my $closed = $is_comment ? $closed_comments : $closed_trackbacks;
my $period = $is_comment ? $comment_period : $trackback_period;
my $akismet = $is_comment ? $akismet_comments : $akismet_trackbacks;
my $blacklist = $is_comment ? $blacklist_comments : $blacklist_trackbacks;
my $notify = $is_comment ? $notify_comments : $notify_trackbacks;
my $moderate = $is_comment ? $moderate_comments : $moderate_trackbacks;
my @fields = $is_comment ? @comment_fields : @trackback_fields;
# Reject request if feedback is not (still) allowed.
unless ($allow && !$closed) {
if ($closed) {
$status_msg =
"This story is older than " . ($period/86400) . " days. "
. ($is_comment ? "Comments" : "TrackBacks")
. " have now been closed.";
} else {
$status_msg =
($is_comment ? "Comments" : "TrackBacks")
. " are not enabled for this site.";
}
return $status_msg;
}
# Filter out the "good" fields from the CGI parameters.
my %params = copy_params(\@fields);
# Comments must have (at least) a comment parameter, and TrackBacks a URL.
if ($is_comment) {
unless ($params{'comment'}) {
$status_msg =
"You didn't enter anything in the comment field.";
return $status_msg;
}
} elsif (!$params{'url'}) {
$status_msg = "No URL specified for the TrackBack";
return 0;
}
# Check feedback to see if it's spam.
if (is_spam(\%params, $is_comment, $akismet, $blacklist)) {
# If we are previewing a comment then we allow the poster a
# chance to revise the comment; otherwise we just reject it.
if ($is_preview) {
$status_msg =
"Your comment appears to be spam and will be rejected "
. "unless it is revised. ";
} else {
$status_msg =
"Your feedback was rejected because it appears to be spam; "
. "please contact the site administrator if you believe that "
. "your feedback was rejected in error.";
return $status_msg;
}
}
# If we are previewing a comment then just save the fields for later
# use in the previewed comment and (as prefilled values) in the comment
# form. Otherwise attempt to save the new feedback information, either
# into the permanent feedback file for this story (if no moderation) or
# into a temporary file (for later moderation).
if ($is_preview) {
$status_msg .= save_preview(\%params);
} else {
($fb_item, $status_msg) = save_feedback(\%params, $moderate);
return $status_msg unless $fb_item;
# Send a moderation message or notify blog owner of the new feedback.
if ($moderate || $notify) {
send_notification(\%params, $moderate, $fb_item);
}
}
return $status_msg;
}
# Make a "safe" copy of the CGI parameters based on the expected
# field names associated with either a comment or TrackBack.
sub copy_params {
my $fields_ref = shift;
my %params;
foreach my $key (@$fields_ref) {
my $value = substr(param($key), 0, $max_param_length) || "";
# Eliminate leading and trailing whitespace, use carriage returns
# as line delimiters, and collapse multiple blank lines into one.
$value =~ s/^\s+//;
$value =~ s/\s+$//;
$value =~ s/\r?\n\r?/\r/mg;
$value =~ s/\r\r\r*/\r\r/mg;
$params{$key} = $value;
}
return %params;
}
# Send notification or moderation email to blog owner.
sub send_notification {
my ($params_ref, $moderate, $fb_item) = @_;
unless ($address && $smtp_server) {
warn "feedback: No address or SMTP server for notifications\n";
return 0;
}
my $message = "New feedback for your post \"$blosxom::title\" ("
. $blosxom::path_info . "):\n\n";
if ($$params_ref{'comment'}) {
$message .= "Name : " . $$params_ref{'name'} . "\n";
$message .= "Email/URL: " . $$params_ref{'url'} . "\n";
$message .= "Comment :\n";
my $comment = $$params_ref{'comment'};
$comment =~ s!\r!\n!g;
$message .= $comment . "\n";
} else {
$message .= "Blog name: " . $$params_ref{'blog_name'} . "\n";
$message .= "Article : " . $$params_ref{'title'} . "\n";
$message .= "URL : " . $$params_ref{'url'} . "\n";
$message .= "Excerpt :\n";
my $excerpt = $$params_ref{'excerpt'};
$excerpt =~ s!\r!\n!g;
$message .= $excerpt . "\n";
}
if ($moderate) {
# For TrackBacks use the default flavour for the approve/reject URI.
my $moderate_flavour = $blosxom::flavour;
$moderate_flavour eq $trackback_flavour
and $moderate_flavour = $blosxom::default_flavour;
$message .= "\n\nTo approve this feedback, please click on the URL\n"
. "$blosxom::url$blosxom::path/$blosxom::fn.$moderate_flavour"
. "?moderate=approve;feedback=" . uri_escape($fb_item) . "\n";
$message .= "\nTo reject this feedback, please click on the URL\n"
. "$blosxom::url$blosxom::path/$blosxom::fn.$moderate_flavour"
. "?moderate=reject;feedback=" . uri_escape($fb_item) . "\n";
}
# Load Net::SMTP module only now that it's needed.
require Net::SMTP; Net::SMTP->import;
my $smtp = Net::SMTP->new($smtp_server);
$smtp->mail($address);
$smtp->to($address);
$smtp->data();
$smtp->datasend("To: $address\n");
$smtp->datasend("From: $address\n");
$smtp->datasend("Subject: [$blosxom::blog_title] Feedback: "
. "\"$blosxom::title\"\n");
$smtp->datasend("\n\n");
$smtp->datasend($message);
$smtp->dataend();
$smtp->quit;
return 1;
}
# Format the date used in comments and TrackBacks. If the argument is a
# number then it is considered to be a date/time in seconds since the
# (Perl) epoch; otherwise we assume that the date is already formatted.
# (This may allow the feedback plug-in to use legacy writeback files.)
sub format_date {
my $date_value = shift;
if ($date_value =~ m!^\d+$!) {
my ($sec, $min, $hour, $mday, $mon, $year, $wday, $yday, $isdst) =
localtime($date_value);
$year += 1900;
# Modify the following to match your preference.
return sprintf("%4d-%02d-%02d %02d:%02d",
$year, $mon+1, $mday, $hour, $min);
} else {
return $date_value;
}
}
# Format the name used in comments.
sub format_name {
my ($name, $url) = @_;
# If the user didn't supply a name, try to use something sensible.
unless ($name) {
if ($url =~ m/^mailto:/) {
$name = substr($url, 7);
} else {
$name = $default_name;
}
}
# Link to a URL if one was provided.
my $name_link =
$url ? "$name" : $name ;
return $name, $name_link;
}
# Format the comment response message.
sub format_cmt_response {
my $response = shift;
# Clean up the response.
$response =~ s/^\s+//;
$response =~ s/\s+$//;
# Convert the response into a special type of paragraph.
# NOTE: A value 'OK' for $response indicates a successful comment.
if ($response eq 'OK') {
$response = '';
} else {
$response = '';
}
return $response;
}
# Format the TrackBack response message.
sub format_tb_response {
my $response = shift;
# Clean up the response.
$response =~ s/^\s+//;
$response =~ s/\s+$//;
# Convert the response into an XML message per the TrackBack Technical
# Specification .
# NOTE: A value 'OK' for $response indicates a successful TrackBack;
# note that this value is *not* used as part of the TrackBack response.
if ($response eq 'OK') {
$response = ""
. "0";
} else {
$response = ""
. "1"
. "$response";
}
return $response;
}
# Format the comment itself.
sub format_comment {
my $comment = shift;
# TODO: Support other comment formats such as Textile.
if ($comment_format eq 'none') {
# A no-op, assumes formatting will be added in the template.
} elsif ($comment_format eq 'plaintext') {
# Simply convert the comment into a series of paragraphs.
$comment = '' . $comment . '
';
$comment =~ s!\r\r!
!mg;
} elsif ($comment_format eq 'markdown'
&& $blosxom::plugins{'Markdown'} > 0) {
$comment = &Markdown::Markdown($comment);
}
return $comment;
}
# Format the blog name used in TrackBacks.
sub format_blog_name {
my $blog_name = shift;
$blog_name or $blog_name = $default_blog_name;
return $blog_name;
}
# Format the title used in TrackBacks.
sub format_title {
my ($title, $url) = @_;
my $title_link;
# Link to article, quoting the title if one was supplied.
if ($title) {
$title_link = "\"$title\"";
} else {
$title = $default_title;
$title_link = "$title";
}
return $title, $title_link;
}
# Format the TrackBack excerpt.
sub format_excerpt {
my $excerpt = shift;
# TODO: Truncate excerpts at some reasonable length.
# Simply convert the excerpt into a series of paragraphs.
if ($excerpt) {
$excerpt = '
' . $excerpt . '
';
$excerpt =~ s!\r\r!!mg;
}
return $excerpt;
}
# Read in the MT-Blacklist file.
sub read_blacklist {
# No need to do anything if we've already read in the blacklist file.
return 1 if @blacklist_entries;
# Try to find the blacklist file and open it.
open BLACKLIST, "$blacklist_file"
or die "Can't read '$blacklist_file', $!\n";
my @lines = grep {! /^\s*\#/ } ;
close BLACKLIST;
die "No blacklists?\n" unless @lines;
foreach my $line (@lines) {
$line =~ s/^\s*//;
$line =~ s/\s*[^\\]\#.*//;
next unless $line;
push @blacklist_entries, $line;
}
die "No entries in blacklist file?\n" unless @blacklist_entries;
return 1;
}
# Do spam tests on comment or TrackBack; returns 1 if spam, 0 if OK.
sub is_spam {
my ($params_ref, $is_comment, $akismet, $blacklist) = @_;
# Perform a series of spam tests. If any show positive then reject.
# Does the host part of the URL reference an IP address?
return 1 if uses_ipaddr($$params_ref{'url'});
# Does the comment or TrackBack match against the Akismet service?
return 1 if $akismet && matches_akismet($params_ref, $is_comment);
# Does the comment or TrackBack match against the MT-Blacklist file
# (deprecated)?
return 1
if $blacklist && matches_blacklist((join "\n", values %$params_ref));
# TODO: Add other useful spam checks.
# Got by all the tests, so assume it's not spam.
return 0;
}
# Check host part of URL to see if it is an IP address.
sub uses_ipaddr {
my $uri = shift;
return 0 unless $uri;
# Construct URI object.
my $u = URI->new($uri);
# Return if this not actually a URI (i.e., it's an email address).
return 0 unless defined($u->scheme);
# Check for an IPv4 or IPv6 address on http/https URLs.
if ($u->scheme eq 'http' || $u->scheme eq 'https') {
if ($u->authority =~ m!^\[?\d!) {
return 1;
}
}
return 0;
}
# Check comment or TrackBack against the Akismet online service.
sub matches_akismet {
my ($params_ref, $is_comment) = @_;
# Load Net:Akismet module only now that it's needed.
require Net::Akismet; Net::Akismet->import;
# Attempt to connect to the Askimet service.
my $akismet = Net::Akismet->new(KEY => $wordpress_api_key,
URL => $blosxom::url);
unless ($akismet) {
warn "feedback: Akismet key verification failed\n";
return 0;
}
# Set up fields to be verified. Note that we do not use the REFERRER,
# PERMALINK, or COMMENT_AUTHOR_EMAIL fields supported by Akismet.
my %fields = (USER_IP => $ENV{'REMOTE_ADDR'});
if ($is_comment) {
$fields{COMMENT_TYPE} = 'comment';
$fields{COMMENT_CONTENT} = $$params_ref{'comment'};
$fields{COMMENT_AUTHOR} = $$params_ref{'name'};
$fields{COMMENT_AUTHOR_URL} = $$params_ref{'url'};
} else {
$fields{COMMENT_TYPE} = 'trackback';
$fields{COMMENT_CONTENT} =
$$params_ref{'title'} . "\n" . $$params_ref{'excerpt'};
$fields{COMMENT_AUTHOR} = $$params_ref{'blog_name'};
$fields{COMMENT_AUTHOR_URL} = $$params_ref{'url'};
}
# Is it spam?
return 1 if $akismet->check(%fields) eq 'true';
# Apparently not.
return 0;
}
# Check comment or TrackBack against the MT-Blacklist file (deprecated).
sub matches_blacklist {
my $params_string = shift;
# Read in the blacklist file.
read_blacklist();
# Check each blacklist entry against the comment or TrackBack.
foreach my $spam (@blacklist_entries) {
chomp($spam);
return 1 if $params_string =~ /$spam/;
}
return 0;
}
# Save comment or TrackBack to disk. If moderating, returns the (randomly-
# generated) id of the item saved for later approval or rejection (plus
# a status message). If not moderating returns the name of the feedback
# file in which the item was saved instead of the id. Returns null on errors.
sub save_feedback {
my ($params_ref, $moderate) = @_;
my $fb_item = '';
my $feedback_fn = '';
my $status_msg = '';
# Clear values used to prefill commentform.
$name_preview = $url_preview = $comment_preview = '';
# Create a new directory if needed to contain the feedback file.
unless (mk_feedback_subdir($fb_path)) {
$status_msg = 'Could not save comment or TrackBack.';
return '', $status_msg;
}
# Save into the main feedback file or a temporary file, depending on
# whether feedback is being moderated or not.
if ($moderate) {
$fb_item = rand_alphanum(8);
$feedback_fn = $fb_item . '-' . $fb_fn;
} else {
$feedback_fn = $fb_fn;
}
# Attempt to open the file and append to it.
unless ($fh->open(">> $fb_dir$fb_path/$feedback_fn")) {
warn "couldn't >> $fb_dir$fb_path/$feedback_fn\n";
$status_msg = 'Could not save comment or TrackBack.';
return '', $status_msg;
}
# Write each parameter out as a line in the file.
foreach my $key (sort keys %$params_ref) {
my $value = $$params_ref{$key};
# Eliminate leading and trailing whitespace, use carriage returns
# as line delimiters, and collapse multiple blank lines into one.
$value =~ s/^\s+//;
$value =~ s/\s+$//;
$value =~ s/\r?\n\r?/\r/mg;
$value =~ s/\r\r\r*/\r\r/mg;
# Ensure URL and other fields are sanitized.
if ($key eq 'url') {
$value = sanitize_uri($value);
} else {
$value = escapeHTML($value);
}
print $fh "$key: $value\n";
}
# Save the date/time (in seconds) and IP address as well.
print $fh "date: " . time() ."\n";
print $fh "ip: " . $ENV{'REMOTE_ADDR'} . "\n";
# End the entry and close the file.
print $fh "-----\n";
$fh->close();
# Set responses to indicate success.
if ($moderate) {
$status_msg =
"Your feedback has been submitted for a moderator's approval; "
. "it may take 24 hours or more to appear on the site.";
return $fb_item, $status_msg;
} else {
$status_msg = 'OK';
return $feedback_fn, $status_msg;
}
}
# Generate random alphanumeric string of the specified length.
sub rand_alphanum {
my $size = shift;
return '' if $size <= 0;
my @alphanumeric = ('a'..'z', 'A'..'Z', 0..9);
return join '', map $alphanumeric[rand @alphanumeric], 0..$size;
}
# Save previewed comment for later viewing (on the same page).
# Sets $status_msg with an appropriate message.
sub save_preview {
my $params_ref = shift;
my $status_msg;
# Save each parameter for later use in the preview template.
foreach my $key (sort keys %$params_ref) {
my $value = $$params_ref{$key};
# Eliminate leading and trailing whitespace, use carriage returns
# as line delimiters, and collapse multiple blank lines into one.
$value =~ s/^\s+//;
$value =~ s/\s+$//;
$value =~ s/\r?\n\r?/\r/mg;
$value =~ s/\r\r\r*/\r\r/mg;
# Ensure URL and other fields are sanitized.
if ($key eq 'url') {
$value = sanitize_uri($value);
} else {
$value = escapeHTML($value);
}
if ($key eq 'name') {
$name_preview = $value;
} elsif ($key eq 'url') {
$url_preview = $value;
} elsif ($key eq 'comment') {
$comment_preview = $value;
}
}
# Save the date/time (in seconds) as well.
$date_preview = time();
# Set response to indicate success.
$status_msg .=
"Please review your previewed comment below and submit it when "
. "you are ready.";
return $status_msg;
}
# Approve a moderated comment or TrackBack (add it to feedback file).
sub approve_feedback {
my $item = shift;
my $item_fn;
my $status_msg = '';
# Construct filename containing item to be approved, checking the
# item name against the proper format from save_feedback().
if ($item =~ m!^[a-zA-Z0-9]{8}!) {
$item_fn = $item . "-" . $fb_fn;
} else {
$status_msg =
"The item name to be approved was not in the proper format.";
return $status_msg;
}
# Read lines from file containing the approved comment or TrackBack.
unless ($fh->open("$fb_dir$fb_path/$item_fn")) {
warn "feedback: couldn't < $fb_dir$fb_path/$item_fn\n";
$status_msg =
"There was a problem approving the comment or TrackBack.";
return $status_msg;
}
my @new_feedback = ();
while (<$fh>) {
push @new_feedback, $_;
}
$fh->close();
# Attempt to open the story's feedback file and append to it.
# TODO: Try to make this more resistant to race conditions.
unless ($fh->open(">> $fb_dir$fb_path/$fb_fn")) {
warn "couldn't >> $fb_dir$fb_path/$fb_fn\n";
$status_msg =
"There was a problem approving the comment or TrackBack.";
return $status_msg;
}
foreach my $line (@new_feedback) {
print $fh $line;
}
# Close the feedback file, delete the file with the approved item.
$fh->close();
chdir("$fb_dir$fb_path")
or warn "feedback: Couldn't cd to $fb_dir$fb_path\n";
unlink($item_fn)
or warn "feedback: Couldn't delete $item_fn\n";
# Set response to indicate successful approval.
$status_msg = "Feedback '$item' approved by moderator. ";
return $status_msg;
}
# Reject a moderated comment or TrackBack (delete the temporary file).
sub reject_feedback {
my $item = shift;
my $item_fn;
my $status_msg;
# Construct filename containing item to be rejected, checking the
# item name against the proper format from save_feedback().
if ($item =~ m!^[a-zA-Z0-9]{8}!) {
$item_fn = $item . "-" . $fb_fn;
} else {
$status_msg =
"The item name to be rejected was not in the proper format.";
return $status_msg;
}
# TODO: Optionally report comment or TrackBack to Akismet as spam.
# Delete the file with the rejected item.
chdir("$fb_dir$fb_path")
or warn "feedback: Couldn't cd to '$fb_dir$fb_path'\n";
unlink($item_fn)
or warn "feedback: Couldn't delete '$item_fn'\n";
# Set response to indicate successful rejection.
$status_msg = "Feedback '$item' rejected by moderator.";
return $status_msg;
}
# Sanitize a query parameter to remove unexpected characters.
sub sanitize_param
{
my $param = shift || '';
# Allow only alphanumeric, underscore, dash, and period.
$param and $param =~ s/[^-.\w]/_/go;
return $param;
}
# Sanitize a URI.
sub sanitize_uri {
my $uri = shift;
# Construct URI object.
my $u = URI->new($uri);
# If it's not a URI then assume it's an email address.
$u->scheme('mailto') unless defined($u->scheme);
# We check email addresses (if allowed) separately from web addresses.
if ($allow_mailto && $u->scheme eq 'mailto') {
# Make sure this is a valid RFC 822 address.
if (valid($u->opaque)) {
$uri = $u->canonical;
} else {
$status_msg = "You submitted an invalid email address. ";
$uri = '';
}
} elsif ($u->scheme eq 'http' || $u->scheme eq 'https') {
if ($u->authority =~ m!^.*@!) {
$status_msg =
"Userids and passwords are not permitted in the URL field. ";
$uri = '';
} elsif ($u->authority =~ m!^\d! || $u->authority =~ m!^\[\d!) {
$status_msg =
"IP addresses are not permitted in the URL field. ";
$uri = '';
} else {
$uri = $u->canonical;
}
} else {
$status_msg =
"You specified an invalid scheme in the URL field; ";
if ($allow_mailto) {
$status_msg .=
"the only allowed schemes are 'http', 'https', and 'mailto'. ";
} else {
$status_msg .=
"the only allowed schemes are 'http' and 'https'. ";
}
$uri = '';
}
return $uri;
}
# The following is taken from the Mail::RFC822::Address module, for
# sites that don't have that module loaded.
my $rfc822re;
# Preloaded methods go here.
my $lwsp = "(?:(?:\\r\\n)?[ \\t])";
sub make_rfc822re {
# Basic lexical tokens are specials, domain_literal, quoted_string, atom, and
# comment. We must allow for lwsp (or comments) after each of these.
# This regexp will only work on addresses which have had comments stripped
# and replaced with lwsp.
my $specials = '()<>@,;:\\\\".\\[\\]';
my $controls = '\\000-\\031';
my $dtext = "[^\\[\\]\\r\\\\]";
my $domain_literal = "\\[(?:$dtext|\\\\.)*\\]$lwsp*";
my $quoted_string = "\"(?:[^\\\"\\r\\\\]|\\\\.|$lwsp)*\"$lwsp*";
# Use zero-width assertion to spot the limit of an atom. A simple
# $lwsp* causes the regexp engine to hang occasionally.
my $atom = "[^$specials $controls]+(?:$lwsp+|\\Z|(?=[\\[\"$specials]))";
my $word = "(?:$atom|$quoted_string)";
my $localpart = "$word(?:\\.$lwsp*$word)*";
my $sub_domain = "(?:$atom|$domain_literal)";
my $domain = "$sub_domain(?:\\.$lwsp*$sub_domain)*";
my $addr_spec = "$localpart\@$lwsp*$domain";
my $phrase = "$word*";
my $route = "(?:\@$domain(?:,\@$lwsp*$domain)*:$lwsp*)";
my $route_addr = "\\<$lwsp*$route?$addr_spec\\>$lwsp*";
my $mailbox = "(?:$addr_spec|$phrase$route_addr)";
my $group = "$phrase:$lwsp*(?:$mailbox(?:,\\s*$mailbox)*)?;\\s*";
my $address = "(?:$mailbox|$group)";
return "$lwsp*$address";
}
sub strip_comments {
my $s = shift;
# Recursively remove comments, and replace with a single space. The simpler
# regexps in the Email Addressing FAQ are imperfect - they will miss escaped
# chars in atoms, for example.
while ($s =~ s/^((?:[^"\\]|\\.)*
(?:"(?:[^"\\]|\\.)*"(?:[^"\\]|\\.)*)*)
\((?:[^()\\]|\\.)*\)/$1 /osx) {}
return $s;
}
# valid: returns true if the parameter is an RFC822 valid address
#
sub valid ($) {
my $s = strip_comments(shift);
if (!$rfc822re) {
$rfc822re = make_rfc822re();
}
return $s =~ m/^$rfc822re$/so;
}
1;
# Default feedback templates.
__DATA__
html comment \n
html trackback \n$feedback::blog_name mentioned this post in $feedback::title_link$feedback::excerpt eq="">.
?>$feedback::excerpt ne="">:\n
$feedback::excerpt
?>
html commentform \n
html trackbackinfo URL for TrackBack pings: $blosxom::url$blosxom::path/$blosxom::fn.$feedback::trackback_flavour
\n
general comment \n
general trackback \n$feedback::blog_name mentioned this post in $feedback::title_link$feedback::excerpt eq="">.
?>$feedback::excerpt ne="">:\n
$feedback::excerpt
?>
general commentform \n
general trackbackinfo URL for TrackBack pings: $blosxom::url$blosxom::path/$blosxom::fn.$feedback::trackback_flavour
\n
trackback content_type application/xml
trackback head
trackback story $feedback::trackback_response
trackback date
trackback foot
__END__
=head1 NAME
Blosxom Plug-in: feedback
=head1 SYNOPSIS
Provides comments and TrackBacks
(C); also supports comment and
TrackBack moderation and spam filtering using Akismet and/or
MT-Blacklist (deprecated). Inspired by the original writeback plug-in
and the various enhanced versions of it.
Comments and TrackBack pings for a particular story are kept in
C<$fb_dir/$path/$filename.wb>.
=head1 QUICK START
Drop this feedback plug-in file into your plug-ins directory (whatever
you set as C<$plugin_dir> in C), and modify the file to
set the configurable variable C<$fb_dir>. You must also modify the
variable C<$wordpress_api_key> if you are using the Akismet spam
blacklist service, the variable C<$blacklist_file> if you are using
the MT-Blacklist file (deprecated), and the variables C<$address> and
C<$smtp_server> if you want feedback notification or moderation. (See
below for more information on these optional features.)
Note that by default all comments and TrackBacks are allowed, with no
spam checking, moderation, or notification.
Modify your story template (e.g., C in your Blosxom data
directory) to include the variables C<$feedback::comments> and
C<$feedback::trackbacks> at the points where you'd like comments and
trackbacks to be inserted.
Modify your story template or foot template (e.g., C in
your Blosxom data directory) to include the variables
C<$feedback::comment_response>, C<$feedback::preview>,
C<$feedback::commentform> and C<$feedback::trackbackinfo> at the
points where you'd like to insert the response to a submitted comment,
the previewed comment (if any), the comment submission form and the
TrackBack information (including TrackBack auto-discovery code).
=head1 CONFIGURATION
By default C<$fb_dir> is set to put the feedback directory and its
contents in the plug-in state directory. (For example, if
C<$plugin_state_dir> is C then the feedback
directory C<$fb_dir> is set to C.)
However a better approach may be to keep the feedback directory at the
same level as C<$datadir>. (For example, if C<$datadir> is
C then use C for the
feedback directory.) This helps ensure that you don't accidentally
delete previously-submitted comments and TrackBacks (e.g., if you
clean out the plug-in state directory).
Once C<$fb_dir> is set, the next time you visit your site the feedback
plug-in will perform some checks, creating the directory C<$fb_dir>
and setting appropriate permissions on the directory if it doesn't
already exist. (Check your web server error log for details of what's
happening behind the scenes.)
Set the variables C<$allow_comments> and C<$allow_trackbacks> to
enable or disable comments and/or TrackBacks; by default the plug-in
allows both comments and TrackBacks to be submitted. The variables
C<$comment_period> and C<$trackback_period> specify the amount of time
after a story is published (or updated) during which comments or
TrackBacks may be submitted (90 days by default); set these variables
to zero to allow submission of feedback at any time after publication.
Set the variables C<$akismet_comments> and C<$akismet_trackbacks> to
enable or disable checking of comments and/or TrackBacks against the
Akismet spam blacklist service (C). If Akismet
checking is enabled then you must also set C<$wordpress_api_key> to
your personal WordPress API key, which is required to connect to the
Akismet service. (You can obtain a WordPress API key by registering
for a free blog at C; as a side effect of
registering you will get an API key that you can then use on any of
your blogs, whether they're hosted at wordpress.com or not.)
Set the variables C<$blacklist_comments> and C<$blacklist_trackbacks>
to enable or disable checking of comments and/or TrackBacks against
the MT-Blacklist file. If blacklist checking is enabled then you must
also set C<$blacklist_file> to a valid value. (Note that in the past
you could get a copy of the MT-Blacklist file from
C; however that
URL is no longer active and no one is currently maintaining the
MT-Blacklist file. We are therefore deprecating use of the
MT-Blacklist file, except for people who already have a copy of the
file and are currently using it; we suggest using Akismet instead.)
Set the variables C<$notify_comments> and C<$notify_trackbacks> to
enable or disable sending an email message to you each time a new
comment and/or TrackBack is submitted. If notification is enabled then
you must set C<$address> and C<$smtp_server> to valid values.
Typically you would set C<$address> to your own email address (e.g.,
'jdoe@example.com') and C<$smtp_server> to the fully-qualified domain
name of the SMTP server you normally use to send outbound mail from
your email account (e.g., 'smtp.example.com').
Set the variables C<$moderate_comments> and C<$moderate_trackbacks> to
enable or disable moderation of comments and/or TrackBacks; moderation
is done by sending you an email message with the submitted comment or
TrackBack and links on which you can click to approve or reject the
comment or TrackBack. If moderation is enabled then you must set
C<$address> and C<$smtp_server> to valid values; see the discussion of
notification above for more information.
=head1 FLAVOUR TEMPLATE VARIABLES
Unlike Rael Dornfest's original writeback plug-in, this plug-in does
not require or assume that you will be using a special Blosxom flavour
(e.g., the 'writeback' flavour) in order to display comments with
stories. Instead you can display comments and/or TrackBacks with any
flavour whatsoever (except the 'trackback' flavour, which is reserved
for use with TrackBack pings). Also unlike the original writeback
plug-in, this plug-in separates display of comments from display of
TrackBacks and allows them to be formatted in different ways.
Insert the variables C<$feedback::comments> and/or
C<$feedback::trackbacks> into the story template for the flavour or
flavours for which you wish comments and/or TrackBacks to be displayed
(e.g., C). Note that the plug-in will automatically set
these variables to undefined values unless the page being displayed is
for an individual story.
Insert the variables C<$feedback::comments_count> and/or
C<$feedback::trackbacks_count> into the story templates where you wish
to display a count of the comments and/or TrackBacks for a particular
story. Note that these variables are available on all pages, including
index and archive pages. As an alternative you can use the variable
C<$feedback::count> to display the combined total number of comments
and TrackBacks (analogous to the variable C<$writeback::count> in the
original writeback plug-in).
Insert the variables C<$feedback::commentform> and
C<$feedback::trackbackinfo> into your story or foot template for the
flavour or flavours for which you want to enable submission of
comments and/or TrackBacks (e.g., C);
C<$feedback::commentform> is an HTML form for comment submission,
while C<$feedback::trackbackinfo> displays the URL for TrackBack pings
and also includes RDF code to support auto-discovery of the TrackBack
ping URL. Note that the plug-in sets C<$feedback::commentform> and
C<$feedback::trackbackinfo> to be undefined unless the page being
displayed is for an individual story.
The plug-in also sets C<$feedback::commentform> and/or
C<$feedback::trackbackinfo> to be undefined if comments and/or
TrackBacks have been disabled globally (i.e., using C<$allow_comments>
or C<$allow_trackbacks>). However if comments or TrackBacks are closed
because the story is older than the time set using C<$comment_period>
or C<$trackback_period> then the plug-in sets C<$feedback::commentform>
or C<$feedback::trackbackinfo> to display an appropriate message.
Insert the variable C<$feedback::comment_response> into your story or
foot template to display a message indicating the results of
submitting or moderating a comment. Note that
C<$feedback::comment_response> has an undefined value unless the
displayed page is in response to a POST request containing a comment
submission (i.e., using the 'Post' or 'Preview' buttons) or a GET
request containing a moderator approval or rejection.
Insert the variable C<$feedback::preview> into your story or foot
template at the point at which you'd like a previewed comment to be
displayed. Note that C<$feedback::preview> will be undefined except on
an individual story page displayed in response to a comment submission
using the 'Preview' button.
=head1 COMMENT AND TRACKBACK TEMPLATES
This plug-in uses a number of flavour templates to format comments and
TrackBacks; the plug-in contains a full set of default templates for
use with the 'html' flavour, as well as a full set of 'general'
templates used as a default for other flavours. You can also supply
your own comment and TrackBack templates in the same way that you can
define other Blosxom templates, by putting appropriately-named
template files into the Blosxom data directory (or one or more of its
subdirectories, if you want different templates for different
categories).
The templates used for displaying comments and TrackBacks are
analogous to the story template used for displaying stories; the
templates are used for each and every comment or TrackBack displayed
on a page:
=over
=item
comment template (e.g., C). This template contains the
content to be displayed for each comment (analogous to the writeback
template used in the original writeback plug-in). Within this template
you can use the variables C<$feedback::name> (name of the comment
submitter), C<$feedback::url> (URL containing the comment submitter's
email address or web site), C<$feedback::date> (date/time the comment
was submitted), and C<$feedback::comment> (the comment itself). You
can also use the variable C<$feedback::name_link>, which combines
C and C<$feedback::url> to create an (X)HTML link if
the commenter supplied a URL, and otherwise is the same as
C<$feedback::name>. Note that this template is also used for previewed
comments.
=item
trackback template (e.g., C). This template contains
the content to be displayed for each TrackBack (analogous to the
writeback template used in the original writeback plug-in). Within
this template you can use the variables C<$feedback::blog_name> (name
of the blog submitting the TrackBack), C<$feedback::title> (title of
the blog post making the TrackBack), C<$feedback::url> (URL for the
blog post making the TrackBack), C<$feedback::date> (date/time the
TrackBack was submitted), and C<$feedback::excerpt> (an excerpt from
the blog post making the TrackBack). You can also use the variable
C<$feedback::title_link>, which combines C<$feedback::title> and
C<$feedback::url> and is analogous to C<$feedback::name_link>.
=back
The feedback plug-in also uses the following templates:
=over
=item
commentform template (e.g., C). This template
provides a form for submitting a comment. The default template
contains a form containing fields for the submitter's name, email
address or URL, and the comment itself; submitting the form initiates
a POST request to the same URL (and Blosxom flavour) used in
displaying the page on which the form appears. If you define your own
commentform template note that the plug-in requires the presence of a
'plugin' hidden form variable with the value set to 'writeback'; this
tells the plug-in that it should handle the incoming data from the POST
request rather than leaving it for another plug-in. Also note that in
order to support both comment posting and previewing the form has two
buttons, both with name 'submit' and with values 'Post' and 'Preview'
respectively; if you change these names and values then you must
change the plug-in's code.
=item
trackbackinfo template (e.g., C). This template
provides information for how to go about submitting a TrackBack. The
default template provides both a displayed reference to the TrackBack
ping URL and non-displayed RDF code by which other systems can
auto-discover the TrackBack ping URL.
=back
=head1 SECURITY
This plug-in has at least the following security-related issues, which
we attempt to address as described:
=over
=item
The plug-in handles POST and GET requests with included parameters of
potentially arbitrary length. To help minimize the possibility of
problems (e.g., buffer overruns) the plug-in truncates all parameters
to a maximum length (currently 10,000 bytes).
=item
People can submit arbitrary content as part of a submitted comment or
TrackBack ping, with that content then being displayed as part of the
page viewed by other users. To help minimize the possibility of
attacks involving injection of arbitrary page content, the plug-in
"sanitizes" any submitted HTML/XHTML content by converting the '<'
character and other problematic characters (including '>' and the
double quote character) to the corresponding HTML/XHTML character
entities. The plug-in also sanitizes submitted URLs by URL-encoding
characters that are not permitted in a URL.
=item
When using moderation, comments or TrackBacks are approved (or
rejected) by invoking a GET (or HEAD) request using the URL of the
story to which the comment or TrackBack applies, with the URL having
some additional parameters to signal whether the comment should be
approved or rejected. Since the feedback plug-in does not track (much
less validate) the source of the moderation request, in theory
spammers could approve their own comments or TrackBacks simply by
following up their feedback submission with a GET request of the
proper form. To minimize the possibility of this happening we generate
a random eight-character alphanumeric key for each submitted comment
or TrackBack, and require that that key be supplied in the approval or
rejection request. This provides reasonable protection assuming that a
spammer is not intercepting and reading your personal email (since the
key is included in the moderation email message).
=back
=head1 VERSION
0.23
=head1 AUTHOR
This plug-in was created by Frank Hecker, hecker@hecker.org; it was
based on and inspired by the original writeback plug-in by Rael
Dornfest together with modifications made by Fletcher T. Penney, Doug
Alcorn, Kevin Scaldeferri, and others.
=head1 SEE ALSO
More on the feedback plug-in: http://www.hecker.org/blosxom/feedback
Blosxom Home/Docs/Licensing: http://www.blosxom.com/
Blosxom Plug-in Docs: http://www.blosxom.com/plugin.shtml
=head1 BUGS
Address bug reports and comments to the Blosxom mailing list
[http://www.yahoogroups.com/group/blosxom].
=head1 LICENSE
The feedback plug-in
Copyright 2003-2006 Frank Hecker, Rael Dornfest, Fletcher T. Penney,
Doug Alcorn, Kevin Scaldeferri, and others
Permission is hereby granted, free of charge, to any person obtaining a
copy of this software and associated documentation files (the "Software"),
to deal in the Software without restriction, including without limitation
the rights to use, copy, modify, merge, publish, distribute, sublicense,
and/or sell copies of the Software, and to permit persons to whom the
Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included
in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
OTHER DEALINGS IN THE SOFTWARE.
$feedback::name_link wrote at $feedback::date:
\n